Chief RPMA251 Manual de Usario

Chief soporte de panel plano RPMA251

Lee a continuación 📖 el manual en español para Chief RPMA251 (1 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002041 Rev01

a Duchossois Group Company

10/09

SSB-251, SSM-251, SLB-251 and SLM-251 Interface Brackets

SSB-251, SSM-251, SLB-251 and SLM-251 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations.

DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place .500 x .316 x .500 spacer over threaded insert towards side of projector.

4. Place interface bracket onto spacer and bottom of projector, aligning the mounting holes in bracket with threaded inserts in bottom of

projector and spacer, and ensuring that triangle in bracket points towards front of projector.

5. Position M4 x 10mm mounting screws with M4 flat washers into the threaded inserts and three bracket side tabs. Position M4 x 25mm

mounting screw into the spacer, threaded insert and bracket. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (4) Screw, Phillips Pan Head, Machine, M4 x 10mm

(4) 10-24 Thumb Nuts ** (4) Washer, M4

(1) All-Points Security Kit (1) Screw, Phillips Flat Head, M4 x 25mm

(1) 5/32" Security Hex Key (1) Spacer, Nylon, .500 x .316 x .500

Towards front

of projector

Towards front

of projector

SLB-251 SLM-251

Especificaciones del producto

Marca:	Chief
Categoría:	soporte de panel plano
Modelo:	RPMA251
Color del producto:	Zilver
Peso del embalaje:	14000 g
Fuente de alimentación:	AC 100 - 240V / 50-60 Hz
Mostrar.:	LCD
Diagonal de la pantalla:	20 "
Resolución:	800 x 600 Pixels
Relación de aspecto original:	4:3
Ángulo de visión, horizontal:	160 °
Ángulo de visión, vertical:	120 °
Relación de contraste típica:	500:1
Brillo:	450 cd/m²
Dimensiones del paquete (AnxPrxAl):	577 x 273 x 668 mm
Altavoces incorporados:	Ja
Energía promedio:	3 W
Consumo de energía (en espera):	3 W
Número de hablantes:	2
tipo HD:	SVGA
Tecnología de visualización:	LCD
Tiempo de respuesta:	16 ms
Interfaz de montaje en panel:	100 x 100 mm
Profundidad (sin base):	93 mm
Altura (sin base):	455 mm
Ancho (sin base):	509 mm
Peso (sin base):	9400 g
Conexiones:	Antenna\nCinch (Composite Video in, Audio in/out)\nScart (Video in, Audio in/out, TV out, RGB in)\nScart (Video in/out, Audio in/out, RGB in)\nS-Video\nEarphone (3.5 mm)
Teletekst:	10 pagina's
Giratorio horizontalmente:	-30 - 30 °
Tamaño de imagen (diagonal):	508 mm
Número de canales:	99 kanalen
Consumo de energía (típico):	60 W
Temperatura de funcionamiento (TT):	0 - 40 °C