Chief RSA228 Manual de Usario

Chief soporte de panel plano RSA228

Lee a continuación 📖 el manual en español para Chief RSA228 (1 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000288 Rev01

a Duchossois Group Company

05/09

SSB-228, SSM-228, SLB-228 and SLM-228 Interface Brackets

SSB-228, SSM-228, SLB-228 and SLM-228 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUPIMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place nylon spacers on bottom of projector and align them with threaded inserts.

4. Place the interface bracket onto the bottom of the projector and align it with the holes in the bracket with the threaded inserts and nylon

spacers on the bottom of the projector.

5. Position M4 x 20mm pan head mounting screws with M4 washers, and M4 x 20mm flat head mounting screws into the mounting holes.

Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) Washer, Flat, M4

(4) 10-24 Thumb Nuts ** (3) Screw, Phillips Pan Head, M4 x 20mm

(1) All-Points Security Kit (2) Screw, Phillips Flat Head, M4 x 20mm

(5) Spacer, Nylon, .500 OD x.194 ID x .500

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-228 SLM-228

(Note: SSB-style interfac

)

(

)

Towards front of

projector

Towards front of

projector

Especificaciones del producto

Marca:	Chief
Categoría:	soporte de panel plano
Modelo:	RSA228
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Knoppen
Color del producto:	Roestvrijstaal
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Peso.:	245000 g
Ancho:	887 mm
Profundidad:	635 mm
Altura:	2050 mm
Impuesto neto:	- W
Longitud del cable:	2 m
Nivel de ruido:	40 dB
Consumo-anual-de-energía:	442 kWu
Clase de eficiencia energética (antigua):	A+
Capacidad bruta del congelador:	- l
Capacidad neta del congelador:	140 l
Capacidad de congelación:	- kg/24u
Dirección de apertura de puerta intercambiable.:	Nee
Capacidad neta del frigorífico:	372 l
Frigorífico de capacidad bruta:	- l
Sin escarcha (nevera):	Ja
Iluminación interior del frigorífico:	Ja
tipo-de-lámpara:	LED
Número de estantes en el refrigerador.:	3
Número-de-cajones-para-verduras:	1
Posición del congelador:	Onder
Sin escarcha (congelador):	Ja
Tiempo de retención en caso de corte de energía:	- uur
Número de estantes del congelador:	2
Capacidad neta total:	512 l
Alarma de temperatura:	Ja
Capacidad bruta total:	- l
Altura del compartimento de instalación:	2064 mm
Material del estante:	Gehard glas
Bolsillos en las puertas del refrigerador:	3
Al área del compartimento:	Ja
Fuente-de-alimentación:	Electrisch
Alarma de puerta abierta:	Ja
Uso de energía por día:	1.21 kWh/24u
Actual:	16 A
Profundidad cuando la puerta está abierta.:	1470 mm
Iluminación interior del congelador:	Ja
Certificación:	CE
Por ángulo de apertura:	105 °
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LED