Chief SLB171 Manual de Usario

Chief Flat panel steun SLB171

Lee a continuación 📖 el manual en español para Chief SLB171 (1 páginas) en la categoría Flat panel steun. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-000239 RevB

a Duchossois Group Company

05/09

SSB-171, SSM-171, SLB-171 and SLM-171 Interface Brackets

SSB-171, SSM-171, SLB-171 and SLM-171 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface bracket.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down.

3. Place the 3/8" nylon spacer over the center back mounting hole.

4. Place interface bracket onto the bottom of the projector and align the holes in the bracket with the threaded inserts in the bottom of the

projector.

5. Place the M4 x 16mm mounting screw in the back hole and the M4 x 10mm mounting screws and washers in the front holes. Tighten all

fasteners at this time, securing the bracket to the projector.

NOTE: Security Screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (1) Screw, Phillips Flat Head, Machine, M4 x16mm

(4) 10 - 24 Thumb Nuts ** (2) Washer, Flat, M4

(1) All-Points Security Kit (2) Screw, Phillips Pan Head, Machine, M4 x10mm

(1) Spacer, Nylon, 3/8"

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the

encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style

interface bracket installation.

SLB-171 SLM-171

Towards front of

projector

Towards front of

projector

(Note: SS

)

(Note: SSB-style interface bracket connections

)

Especificaciones del producto

Marca:	Chief
Categoría:	Flat panel steun
Modelo:	SLB171
Tipo de operación:	Knoppen
Color del producto:	Silver, Orange, Black
Peso.:	17500 g
Longitud del cable:	9 m
Nivel de ruido:	94 dB
Consumo-anual-de-energía:	- kWu
Amable:	Trommelstofzuiger
tipo de limpieza:	Droog en nat
Capacidad de polvo:	60 l
Potencia máxima de entrada:	4847 W
Interruptor encendido / apagado:	Ja
Tipo de contenedor de aspiradora:	Stofzak
tipo de tubo:	Vast
Cantidad de piezas de tubo:	3
Manguera flexible:	Ja
Uso correcto:	Zakelijk
Cepillo de aspiradora incluido:	Afstofborstel
Ruedas de materiales:	Rubber
Longitud de la manguera:	3 m
voltaje-de-entrada-de-CA:	127 V
Frecuencia-de-entrada-de-CA:	60 Hz