Chief SLB6500 Manual de Usario
Chief
Flat panel steun
SLB6500
Lee a continuación 📖 el manual en español para Chief SLB6500 (1 páginas) en la categoría Flat panel steun. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/1
8850-000194 Rev01
©2009 Milestone AV Technologies,
a Duchossois Group Company
05/09
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
SLB-6500 and SLM-6500 Interface Brackets
SLB and SLM series Interface brackets are designed for use with Chief RPA, RPM, and Smart-Lift series projector mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!
Installation:
WARNING: OVERTIGHTENING OF SCREWS CAN DAMAGE PARTS AND LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE
TO EQUIPMENT! DO NOT over tighten screws when installing Interface bracket.
NOTE: Step 1 is only required when installing an SLB Interface bracket. If an SLM bracket is being installed proceed to step 2.
1. Screw six thumb screws onto six 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down.
3. Place Interface bracket onto bottom of projector and align four threaded inserts with mounting holes.
4. Secure Interface bracket to projector using four M6 x 12mm Phillips pan head screws and four M6 flat washers.
NOTE: If there is interference when installing the bracket due to the design of certain projector models, use the nylon spacers and longer
M6 x 16mm screws instead of the M6 x 12mm screws and M6 flat washers.
NOTE: Security Screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the
All- Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (4) Screw, Phillips Pan Head, Machine, M6 x 12mm
(6) 10 - 24 Thumb Nuts** (4) Washer, Flat, M6
(1) All-Points Security Kit (4) Screw, Phillips Pan Head, Machine, M6 x 16mm
(1) 5/32" Hex Key (4) Spacer, Nylon, .320 x .500 x .250
**Only used when installing SLB Interface brackets.
Towards front
of projector
Towards front
of projector
Especificaciones del producto
Marca: | Chief |
Categoría: | Flat panel steun |
Modelo: | SLB6500 |
¿Necesitas ayuda?
Si necesitas ayuda con Chief SLB6500 haz una pregunta a continuación y otros usuarios te responderán
Flat panel steun Chief Manuales
16 Septiembre 2024
14 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
Flat panel steun Manuales
- Flat panel steun HP
- Flat panel steun Hitachi
- Flat panel steun SilverStone
- Flat panel steun 3M
- Flat panel steun GPX
- Flat panel steun Kensington
- Flat panel steun Nec
- Flat panel steun Da-Lite
- Flat panel steun Luxor
- Flat panel steun Steren
- Flat panel steun Digitus
- Flat panel steun Vogels
- Flat panel steun Sven
- Flat panel steun Valueline
- Flat panel steun One For All
- Flat panel steun Newstar
- Flat panel steun BakkerElkhuizen
- Flat panel steun Monoprice
- Flat panel steun Ergotron
- Flat panel steun Atdec
- Flat panel steun StarTech.com
- Flat panel steun Speaka
- Flat panel steun Kogan
- Flat panel steun Cabstone
- Flat panel steun SmartMetals
- Flat panel steun Unicol
- Flat panel steun Zaor
- Flat panel steun AMX
- Flat panel steun Mount-It!
- Flat panel steun Helder
Últimos Flat panel steun Manuales
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024