Chief SSB293 Manual de Usario

Chief soporte de panel plano SSB293

Lee a continuación 📖 el manual en español para Chief SSB293 (1 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8800-002105 Rev00

a Duchossois Group Company

07/11

SSB-293, SSM-293, SLB-293 and SLM-293 Interface Brackets

SSB-293, SSM-293, SLB-293 and SLM-293 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place three spacers over threaded inserts in bottom of projector.

4. Place the interface bracket onto the spacers, aligning the mounting holes in the bracket with the spacers and threaded inserts in the bottom

of the projector and ensuring that triangle in bracket points towards front of projector.

5. Position M3 x 16mm mounting screws into the spacers, threaded inserts and interface bracket. Tighten all fasteners at this time, securing

the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation

instructions in the All-Points Security Kit.

(1) Interface Bracket (3) Screw, Phillips Flat Head, Machine, M3 x 16mm

(4) 10-24 Thumb Nuts ** (3) Spacer, Nylon, .375 x .194 x .3125

(1) All-Points Security Kit (1) 5/32" Security Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.

DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.

SLB-293 SLM-293

Towards front

of projector

Towards front

of projector

Especificaciones del producto

Marca:	Chief
Categoría:	soporte de panel plano
Modelo:	SSB293
Color del producto:	Black, Silver, White
Pantalla incorporada:	Ja
Peso.:	10400 g
Ancho:	400 mm
Profundidad:	230 mm
Altura:	620 mm
Longitud del cable:	2.8 m
Bloqueo infantil:	Ja
Nivel de ruido:	- dB
Peso del embalaje:	13000 g
Ancho del embalaje:	475 mm
Empaquetadura en profundidad:	320 mm
Altura del embalaje:	725 mm
Capacidad del tanque de agua:	1.7 l
Adecuado para habitaciones de hasta:	70 m²
Consumo de energía (máx.):	95 W
Velocidad de purificación del aire:	- m³/uur
Filtra bacterias:	96 procent
Número de etapas de filtrado:	4
Controlado remotamente:	Ja
Sensor(es) de calidad del aire:	Ja
Mando a distancia incluido:	Ja
voltaje-de-entrada-de-CA:	50/60 V
Frecuencia-de-entrada-de-CA:	220 - 240 Hz