Chief TPP2534 Manual de Usario

Lee a continuación 📖 el manual en español para Chief TPP2534 (7 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
T
russ
Pitch-Adjustable (TPP) Mount
BEFORE YOU BEGIN
WARNING: TO PREVENT PERSONAL INJURY, THOROUGHLY STUDY ALL INSTRUCTIONS AND ILLUS-
TRATIONS BEFORE YOU BEGIN TO INSTALL THE UNIT. PAY PARTICULAR ATTENTION TO THE “IMPOR-
TANT WARNINGS AND CAUTIONS” ON PAGE 1.
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the unit. Pay particular attention to the
“IMPORTANT WARNINGS AND CAUTIONS” on Page 1.
The maximum weight to be installed on the TPP is 150 pounds (68.04 Kg).
If you have any questions about this assembly, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
I N S T R U C T I O N M A N U A L
The Truss Pitch-Adjustable (TPP) mount is a perfect
solution exhibit, retail and digital signage applications.
The mount is quick, easy and versatile.
The TPP accommodates a large range of truss dimen-
sions (up to 14” O.D.), includes security options and pro-
vides flexible feature to achieve a custom installation
installation. The exclusive Q-Latch™ Mounting System
secures the LArge Flat Panel Display with a lockable
latch to confirm mount stability and integrated security
allows the display to be locked to the mount by adding a
padlock.
Your display can be mounted portrait or landscape and
four pitch adjustments, up or down, are available as pre-
set, locking positions (0, 5, 10 or 15 degrees).
LOGO
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY
SAVAGE, MINNESOTA 55378 USA
PART NO. 8804-000010 (Rev. B)
©2003 Chief Manufacturing
www.chiefmfg.com
Printed in USA 05-04
Instruction Manual TPP
1
IMPORTANT WARNINGS AND CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment. If the structural members
can not support this weight, reinforce the structural members before installing the mount.
WARNING: The installer is responsible for verifying that the structure to which the TPP is anchored will safely sup-
port the combined load of all attached components or other equipment.
WARNING: The weight of the display must not exceed 150 lbs. (68.04 kg), the maximum load capacity of the TPP.
WARNING: Be aware during the installation that there are no pinch points for people and for electrical wiring.
WARNING: Be aware of the potential for personal injury or damage to the mount if it is not adequately mounted.
CAUTION: Check the unit for shipping damage before you begin the installation.
CAUTION: Changes or modifications not approved by Chief Manufacturing could void users warranty.
TOOLS REQUIRED FOR INSTALLATION
Socket set with extension
Open wrenches
NOTE: Other tools may be required depending on the
method of installing the lift in the ceiling.
CONTENTS
PARTS ........................................................................ 2
INSPECT THE MOUNT BEFORE INSTALLING ....... 3
TPP INSTALLATION ................................................. 3
Assembly ................................................................... 3
Mount the Display ....................................................... 5
Tilt Adjustment ........................................................... 5
Remove the Display ................................................... 6
2
Instruction Manual TPP
(1) PLATE, back (1) SCREW, pan head, 10-24
(1) PLATE, assembly, pitch-adjustable (4) SCREW, cap, hex head, 5/16-18 X 1/2”
(1) PLATE, face (2) NUT, Stover locknut, 3/8-16
(1) FLAG, latching (1) SPACER, Nylon, .38 X .194 X .032”
(1) NUT, Nylock, 10-24 (2) WASHER, flat, 3/8”
(3) WASHER, VHMW
PARTS

Especificaciones del producto

Marca: Chief
Categoría: soporte de panel plano
Modelo: TPP2534

¿Necesitas ayuda?

Si necesitas ayuda con Chief TPP2534 haz una pregunta a continuación y otros usuarios te responderán




soporte de panel plano Chief Manuales

Chief

Chief PFQUB Manual de Usario

17 Septiembre 2024
Chief

Chief VPAU Manual de Usario

16 Septiembre 2024
Chief

Chief MFQUB Manual de Usario

15 Septiembre 2024
Chief

Chief PFMUB Manual de Usario

15 Septiembre 2024
Chief

Chief RXF3 Manual de Usario

14 Septiembre 2024
Chief

Chief PCM2364 Manual de Usario

2 Septiembre 2024
Chief

Chief SLB6500 Manual de Usario

2 Septiembre 2024
Chief

Chief KTC445B Manual de Usario

2 Septiembre 2024

soporte de panel plano Manuales

Últimos soporte de panel plano Manuales