Citronic USB2+1 Manual de Usario
Citronic
Equipo de DJ
USB2+1
Lee a continuación 📖 el manual en español para Citronic USB2+1 (15 páginas) en la categoría Equipo de DJ. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/15
USB2+1
USB AUDIO INTERFACE
Item ref: 173.650 UK
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
173.650UK User Manual
Introduction
Thank you for choosing the Citronic USB2+1 audio interface your digital recording equipment. This device as has
been developed to provide versatile platform for your computer-based audio workstation. Pla ease read and
follow the enclosed instructions to achieve the best results from your USB2+1 interface.
Front & rear panels
1.
Microphone input 1 (6.3mm jack / XLR)
8.
Input 3 Signal and Clip LEDs
2.
Input 1 Signal and Clip LEDs
9.
Direct Monitor swi tch
3.
Input 1 MUTE switch
10.
Power and +48V phantom power LEDs
4.
Microphone input 2 (6.3mm jack / XLR)
11.
Headphones output 6.3mm stereo jack
5.
Input 2 Signal and Clip LEDs
12.
Monitor line output L+R RCA
6.
Input 2 MUTE switch
13.
USB type-C connection to PC (and power)
7.
Instrument input 3 (6.3mm jack)
14.
+48V phantom power on/off switch
Top panel
15.
Microphone 2 level control
16.
Microphone 1 level control
17.
Echo mix control
18.
Instrument input 3 level control
19.
Monitor level control
Connection
Connect recording microphones to MIC and MIC2 inputs via balanced 6.3mm plug or balanced XLR. 1 un
Enable +48V on the rear panel for condenser microphones that require this.
Line inputs may also be connected to these inputs but the level controls may respond differently.
Connect instruments, such as electric guitar, bass or keyboard to the Instrument 3 input via 6.3mm plug. s
Connect stereo headphones (recommended ) to the Headphones output on the front panel. 32Ω
Connect studio monitors to the L+R Monitor Out RCA sockets on the rear panel.
Connect the USB type-C connection on the rear panel to your Mac or PC computer USB port.
173.650UK User Manual
Operation
Ensure all level controls are turned down initially and set the USB2+1 for recording to the computer. up
The USB2+1 is powered directly from the computer USB port and does not require any other power. ’s
To avoid confusion, ensure that any other USB audio devices are disconnected or disabled for initial setup.
Within the audio settings of your PC or Mac computer, see that the system recognizes a USB audio device.
The USB2+1 is seen as a generic USB audio device, which can be selected for input source output device (or or
both) within the recording software as required.
Once the audio device is set up and selected, check each input channel in turn for output to the computer by
selecting record in the software and increasing the level of the selected USB2+1 input. “ ”
Continue increasing the level for that input until there is adequate signal for recording, whilst ensuring that the
CLIP LED is not lighting more than momentarily. The SIG LED should be lit consistently when a signal is playing
but if the CLIP LED is lighting persistently, the level control should be reduced until it is only lit for an instant.
The output returned to the USB2+1 from the computer can be heard through any connected monitors or
headphones by increasing the level on the large MONITOR rotary control. T hear the inputs directly before they o
are processed by the computer, press in the DIRECT MONITOR switch, which routes the inputs directly to the
monitoring section. Leaving this switch out listens to the output from the computer.
In the absence of other effects processing, the USB2+1 also has a preset inbuilt echo effect that can be
introduced by increasing the ECHO rotary control as desired.
To avoid loud noises, turn down level controls and the inputs of connected equipment before disconnecting.
Power supply
5Vdc (from USB)
Connection
USB type-C
Controls
Mic1, Mic2, Inst3, Effect, Monitor
Input connections
2 x mic XLR/Jack, 1 x 6.3mm instrument jack
Phantom power
+48V switchable to XLR inputs
Frequency response
10Hz - 30kHz (-0.5dB)
Input impedance: instrument
1M Ohm
Input impedance: mic (or line)
3k Ohm
Max. input sound level
Mic or Instrument +2dBu, Line +22dBu
Dynamic range
100dB (A-weighted)
Sampling format
48kHz, 16-bit
Monitor outputs
Headphones (stereo 6.3mm jack), Line out (L+R RCA)
Dimensions
160 x 110 x 57mm
Weight
529g
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2022. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland
Especificaciones del producto
Marca: | Citronic |
Categoría: | Equipo de DJ |
Modelo: | USB2+1 |
¿Necesitas ayuda?
Si necesitas ayuda con Citronic USB2+1 haz una pregunta a continuación y otros usuarios te responderán
Equipo de DJ Citronic Manuales
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
1 Septiembre 2024
31 Agosto 2024
31 Agosto 2024
30 Agosto 2024
29 Agosto 2024
29 Agosto 2024
29 Agosto 2024
Equipo de DJ Manuales
- Equipo de DJ Karcher
- Equipo de DJ Pioneer
- Equipo de DJ Yamaha
- Equipo de DJ Akai
- Equipo de DJ Lenco
- Equipo de DJ Pyle
- Equipo de DJ BeamZ
- Equipo de DJ Audio-Technica
- Equipo de DJ Gemini
- Equipo de DJ Brigmton
- Equipo de DJ Denon
- Equipo de DJ Sunstech
- Equipo de DJ Vonyx
- Equipo de DJ Thorens
- Equipo de DJ Korg
- Equipo de DJ Marquant
- Equipo de DJ Krüger And Matz
- Equipo de DJ Envivo
- Equipo de DJ Pro-Ject
- Equipo de DJ Faderfox
- Equipo de DJ Behringer
- Equipo de DJ PreSonus
- Equipo de DJ Native Instruments
- Equipo de DJ Tascam
- Equipo de DJ Focusrite
- Equipo de DJ Festo
- Equipo de DJ IK Multimedia
- Equipo de DJ EVO
- Equipo de DJ QTX
- Equipo de DJ Reloop
- Equipo de DJ Numark
- Equipo de DJ Teac
- Equipo de DJ Mpman
- Equipo de DJ Trevi
- Equipo de DJ Chauvet
- Equipo de DJ Nevir
- Equipo de DJ ESI
- Equipo de DJ Omnitronic
- Equipo de DJ Roadstar
- Equipo de DJ Newstar
- Equipo de DJ Line 6
- Equipo de DJ Cambridge
- Equipo de DJ Audient
- Equipo de DJ Skytec
- Equipo de DJ M-Audio
- Equipo de DJ Beyerdynamic
- Equipo de DJ Victrola
- Equipo de DJ AudioQuest
- Equipo de DJ Stanton
- Equipo de DJ Power Dynamics
- Equipo de DJ Music Hall
- Equipo de DJ SPL
- Equipo de DJ Monacor
- Equipo de DJ Martin
- Equipo de DJ Hercules
- Equipo de DJ DAP Audio
- Equipo de DJ Vocopro
- Equipo de DJ Motu
- Equipo de DJ Universal Audio
- Equipo de DJ IConnectivity
- Equipo de DJ Ortofon
- Equipo de DJ Novation
- Equipo de DJ Serato
- Equipo de DJ Kenton
- Equipo de DJ Ecler
- Equipo de DJ Icon
- Equipo de DJ Gravity
- Equipo de DJ TC Helicon
- Equipo de DJ Fun Generation
- Equipo de DJ Cheetah
- Equipo de DJ ANT
- Equipo de DJ IMG Stage Line
- Equipo de DJ Denon DJ
- Equipo de DJ Sirus
- Equipo de DJ Rane
- Equipo de DJ Elektron
- Equipo de DJ Zomo
- Equipo de DJ Nektar
- Equipo de DJ Fluid
- Equipo de DJ Genki Instruments
- Equipo de DJ JTS
- Equipo de DJ Mixars
- Equipo de DJ UDG Gear
- Equipo de DJ Pangea Audio
- Equipo de DJ Glorious
- Equipo de DJ Majestic
- Equipo de DJ Adam Hall
- Equipo de DJ Meris
- Equipo de DJ PLAYdifferently
- Equipo de DJ The T.mix
- Equipo de DJ MoFi
- Equipo de DJ Monkey Banana
Últimos Equipo de DJ Manuales
27 Octubre 2024
15 Octubre 2024
8 Octubre 2024
2 Octubre 2024
2 Octubre 2024
2 Octubre 2024
2 Octubre 2024
29 Septiembre 2024
29 Septiembre 2024
27 Septiembre 2024