Citronic X-PAD Manual de Usario

Citronic Equipo de DJ X-PAD

Lee a continuación 📖 el manual en español para Citronic X-PAD (7 páginas) en la categoría Equipo de DJ. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

X-PAD

Portable Audio Device

Item ref: 173.640 UK

User Manual

Version 1.0

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

173.640UK User Manual

Introduction

Thank you for choosing a Citronic X-PAD for digital audio recording and playback with special effects

processing. Suitable for operation with a PC or smart phone for music production, rehearsal and online

media. Please read this manual in full and keep for future reference to get the best from your product and

avoid damage through misuse.

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC

ELECTRIQUE NE PAS

OUVRIR

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit

This symbol indicates that there are important operating and

maintenance instructions in the literature accompanying this unit.

Warning

To prevent the risk of fir or electric shock, do not expose any components to rain or moisture. If liquids e

enter the housing, stop using immediately, allow the unit to dry out and have checked by qualified it

personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.

No user serviceable rts inside Do not open the case refer all servicing to qualified service personnel. pa – –

Safety

• Charge the internal battery from a 5Vdc USB port or charger via the USB type-C Charge input.

Avoid ingress of water or particles into any part of the hou ng. If liquids are spilled on si

the X-PAD, stop using immediately, allow the unit to dry out and have checked by

qualified personnel before further use.

Placement

• Keep the console out of direct sunlight and away from heat sources.

• Do not place heavy objects on top of the control surface.

• K the control surface and connections free from damp or dust eep .

Cleaning

• Use a soft cloth with a neutral detergent to clean the housing as required.

• A soft brush can be used to clear debris from be een controls without damaging them. tw

• Do not use solvents for cleaning the unit.

173.640UK User Manual

USB type-C connections

1. 5V USB type-C power only connection dc 2A

2. USB type- data connection and - - C PC On The Go

Th X-PAD can be used as a standalone audio processor or as a plug play audio device when connected e +

to a laptop or smart phone When connecting the X-PAD to a laptop smart phone, use the USB type-. or C

PC/OTG data connection (2 on the bottom edge and connect to a USB port on the host device. )

Alongside the PC/OTG data connect is another USB type- connector (1), which is for charging the ion C

internal battery using a suitable USB power supply delivering 5Vdc 2A output (not supplied).

Audio connections

Audio connections to the X-PAD are on the top edge and all are 3.5mm jack type.

1. Balanced 3.5mm m input +ic 48V phantom power

2. 3.5mm mic input +5V phantom power

3. 3.5mm headset with mic in/out connection

4. 3.5mm stereo headphones output

5. 3.5mm stereo BackGround Music input

6. 3.5mm stereo on-AIR connection (smart phone in+out live)

Jack number 3 is a balanced (TRS) microphone input whic has 5V h

phantom power but can provide 48V phantom power when

switched in. This is most often a requirement for professional studio

condenser microphones. An XLRF to 3.5mm TRS plug balanced lead

is provided the package for this purpose. in

Jack number 4 is an additional microphone input, which has 5V

phantom power and can accept dynamic low voltage condenser or

microphones, such as some -clip and headset microphones. tie

Jack number 5 is a 4-pole (TRRS) connector for a headset. Thi has s

connection for stereo headphones (output) and microphone (input)

combined into a single jack.

Jack number 6 is a stereo headphones jack, which can be used for

monitoring recordings and playback of tracks through standard

wired headphones or earbuds.

Jack number 7 is a stereo line input for B kGround Music (BGM) ac

playback from a phone, mp3 player or other line level source.

Jack number 8 is a 4-pole (TRRS) connector for a smart phone

providing -AIR live recording with connections for left & right audio and microphone to record 2-way on

audio through the phone.

Especificaciones del producto

Marca:	Citronic
Categoría:	Equipo de DJ
Modelo:	X-PAD
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Knoppen
Pantalla incorporada:	Nee
Ancho:	600 mm
Profundidad:	573 mm
Altura:	850 mm
Impuesto neto:	2300 W
Número de cubiertos:	12 couverts
Color de la puerta:	Wit
Temporizador de inicio retrasado:	Ja
clase de secado:	A
Duración del ciclo:	140 min
Nivel de ruido:	54 dB
Consumo-anual-de-energía:	231 kWu
Clase de eficiencia energética (antigua):	A
Consumo de agua por ciclo:	17 l
eraclase:	A
Actual:	10 A
Número de programas de lavado:	4
Panel de control de colores:	Wit
indicador de sal:	Ja
Indicador de abrillantador:	Ja
Protección contra inundaciones:	Ja
medio cargado:	Nee
Programas de lavado:	Eco, Intensive, Pre-wash, Quick
Consumo de energía por ciclo:	1.05 kWu
Temperatura (máx.):	70 °C
voltaje-de-entrada-de-CA:	230 V
Frecuencia-de-entrada-de-CA:	50 Hz