Conceptronic ZEUS05E Manual de Usario

Conceptronic No categorizado ZEUS05E

Lee a continuación 📖 el manual en español para Conceptronic ZEUS05E (25 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/25

Multi Language Quick Guide

Oce UPS

ZEUS 05E

English

Conceptronic UPS

1. Package contents

The following items are present in the package of the Conceptronic UPS:

•UPS

•Multi language quick installation guide

2. Specications

Capacity : 650VA 360W

3 Product overview.

1. Power On/O Switch

2. LED Indicators

3. Battery Backup & Surge

Protected Outlets

Provide battery backup and surge

protection. They ensure power is

provided to connected equipment

over a period of time during a

power failure.

4. Surge Protected Outlets

Provide surge protection for

bypass output.

5. Input power cord

6 Modem/LAN Internet Protection (RJ45&RJ11).

Communication protection ports will protect any standard modem, fax, telephone line,

or network cable .

7. Input Circuit Breaker

The Circuit Breaker provides optimal overload protection.

Denitions for illuminated led indicators

LED

Alarm

Condition

Off

o

Flash

Beep 1 time In every

30 ecs

Utility Failure - The UPS is providing

battery power to outlets.

Flash

Beep 1 time In every

2 ecs

Utility Failure - The UPS is providing

battery power. The rapid beeps indicate

the battery will run out of power shortly.

On/Flash

Beep 1 time In every

0.5 s ec

Overload - Occurs when connected

equipment exceeds the rating of the unit.

Turn the UPS o and unplug at least one

piece of equipment from the UPS.

English

4 Installation & usage.

How to determine the power requirements of your equipment

1. Make sure that the total Volt-Amp (VA) requirements of your computer, monitor, and

peripheral equipment does not exceed rated capacity.

2. Ensure that the equipment plugged into the battery power-supplied/surge outlets

does not exceed the UPS unit's rated capacity. If the rated unit capacities are

exceeded, an overload condition may occur and cause the UPS unit to shut down or

the circuit breaker to trip.

Hardware installation guide

1. Your new UPS may be used immediately upon receipt. However, recharging the

battery for at least 8 hours is recommended to ensure that the battery's maximum

charge capacity is achieved. Charge loss may occur during shipping and storage. To

recharge the battery, simply leave the unit plugged into an AC outlet. The unit will

charge in both the on and o position.

2. With the UPS unit o and unplugged, connect the computer, monitor, and any

externally powered data storage device (Zip drive, Jazz drive, Tape drive), etc. into the

battery power supplied outlets. DO NOT plug a laser printer, copier, space heater,

vacuum, paper shredder or other large electrical device into the battery power supplied

outlets. The power demands of these devices will overload and possibly damage the

unit.

3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the

wall branch outlet is protected by a fuse or circuit breaker and does not service

equipment with large electrical demands (e.g. air conditioner, refrigerator, copier, etc.

Avoid using extension cords.

4. Press the power switch to turn the unit on. The power on indicator light will illuminate

and the unit will "beep".

5. If an overload is detected, an audible alarm will sound and the unit will emit one long

beep. To correct this, turn the UPS o and unplug at least one piece of equipment from

the battery power supplied outlets. Wait 10 seconds. Make sure the circuit breaker /

fuse is normal and then turns the UPS on.

6. Your UPS is equipped with an auto-charge feature. When the UPS is plugged into

an AC outlet, the battery will automatically recharge.

7. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all

times.

Especificaciones del producto

Marca:	Conceptronic
Categoría:	No categorizado
Modelo:	ZEUS05E
Color del producto:	Zwart
Peso.:	4500 g
Ancho:	625 mm
Profundidad:	954 mm
Altura:	50 mm
Peso del embalaje:	4800 g
Ancho del embalaje:	156 mm
Empaquetadura en profundidad:	980 mm
Altura del embalaje:	50 mm
Manual de usuario:	Ja
Material de la carcasa:	Plastic, Steel
Método de montaje:	Muur
Capacidad máxima de peso:	75 kg
Certificación:	CE, REACH
Interfaz de montaje en panel:	100 x 100,100 x 200,200 x 100,200 x 200,200 x 300,200 x 400,300 x 200,300 x 300,400 x 200,400 x 400,400 x 300,600 x 200,600 x 400,600 x 600,600 x 300,800 x 400,800 x 600,900 x 600 mm
Certificados de sostenibilidad:	RoHS
Incluyendo tornillos:	Ja
Número de tornillos:	26
Compatibilidad de la interfaz de montaje (min):	100 x 100 mm
Compatibilidad de la interfaz de montaje (máx.):	900 x 600 mm
Número de pantallas admitidas:	1
Gestión de cables mejorada:	Nee
Altura del paquete principal (exterior):	230 mm
Ancho del embalaje principal (exterior):	180 mm
Longitud del paquete principal (exterior):	1000 mm
Cantidad por caja principal (exterior):	5 stuk(s)
Rango de ángulo de inclinación:	-10 - 5 °
Tamaño máximo de pantalla:	100 "
Código del Sistema Armonizado (SA):	85299097
Tamaño mínimo de pantalla:	60 "
Incluyendo anclaje:	Ja
Función antirrobo:	Nee
Profundidad (máx.):	954 mm
Lavadoras incluidas:	Ja
Cantidad de arandelas incluidas:	10
Número de anclajes incluidos:	6
Incluyendo espaciador:	Ja
Número de soportes de montaje del adaptador incluidos:	2
Adaptador de soporte para colgar incluido:	Ja
Cantidad de espaciadores incluidos:	16