Crestron PROAMP-7X250 Manual de Usario

Crestron receptor PROAMP-7X250

Lee a continuación 📖 el manual en español para Crestron PROAMP-7X250 (32 páginas) en la categoría receptor. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/32

Crestron PROAMP(I)-7X250

PROCISE™ High-Definition Professional

Surround Sound Amplifier

Operations Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

Important Safety Instructions

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Clean only with dry cloth.

•Do not block any ventilation openings. Install in accordance

with the manufacturer's instructions.

•Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

•Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the

obsolete outlet.

•Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

•Only use attachments/accessories specified by the

manufacturer.

•Use only with the cart, stand, tripod, bracket or

table specified by the manufacturer or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

•Unplug this apparatus during lightning storms or when unused

for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

•Disconnect power prior to connecting or disconnecting

equipment.

•Do not install in direct sunlight.

•The apparatus must be installed in a way that the power cord

can be removed either from the wall outlet or from the device

itself in order to disconnect the mains power.

•Prevent foreign objects from entering the device.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE. THE APPARATUS SHALL NOT BE

EXPOSED TO DRIPPING OR SPLASHING. OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD

NOT BE PLACED ON THE APPARATUS.

WARNING:

TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE

COVER. THERE ARE NO USER SERVICEABLE PARTS

INSIDE. ONLY QUALIFIED SERVICE PERSONNEL

SHOULD PERFORM SERVICE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

WARNING:

THIS IS AN APPARATUS WITH CLASS I

CONSTRUCTION. IT SHALL BE CONNECTED TO AN

ELECTRICAL OUTLET WITH AN EARTHING GROUND

TERMINAL.

IMPORTANT:

The PROAMP-7X250 and PROAMPI-7X250 can be used

with Class 2 output wiring.

Regulatory Compliance

Federal Communications Commission (FCC) Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada (IC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

(1) This device may not cause harmful interference and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance

could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

Consult the dealer or an experienced radio/TV technician for help

As of the date of manufacture, the PROAMP-7X250 and PROAMPI-7X250 have been tested and found to

comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance

Labelling.

All brand names, product names and trademarks are the property of their respective owners.

Especificaciones del producto

Marca:	Crestron
Categoría:	receptor
Modelo:	PROAMP-7X250
Color del producto:	Zwart
Peso.:	2300 g
Ancho:	224 mm
Profundidad:	227 mm
Altura:	340 mm
Peso del embalaje:	3600 g
Ancho del embalaje:	445 mm
Empaquetadura en profundidad:	140 mm
Altura del embalaje:	380 mm
Frecuencia del procesador:	- GHz
Modelo de procesador:	TERA2321
Puerto USB:	Ja
red LAN:	Ja
Número de puertos USB 2.0:	4
Puerto(s) VGA (D-Sub):	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Altavoces incorporados:	Ja
Número de altavoces incorporados:	2
Capacidad máxima de peso:	- kg
Salidas de auriculares:	1
Certificación:	VMware 5.x
Memoria interna:	0.5 GB
Tipo de memoria interna:	DDR3-SDRAM
Montaje VESA:	Ja
Interfaz de montaje en panel:	75 x 75, 100 x 100 mm
Puertos DVI-D:	1
Certificados de sostenibilidad:	ENERGY STAR
Tecnología de cableado:	10/100/1000Base-T(X)
Capacidad total de almacenamiento:	- GB
Adaptación externa:	Ja
Incluye monitor:	Nee
Número de pantallas admitidas:	1
Altavoces potentes:	1 W
Puertos seriales):	1
Consumo de energía (típico):	7.3 W
Tamaño máximo de pantalla:	- "
Tamaño mínimo de pantalla:	- "