Crestron ULTIMATE ASUB10-B-T-EACH Manual de Usario

Crestron Vocero ULTIMATE ASUB10-B-T-EACH

Lee a continuación 📖 el manual en español para Crestron ULTIMATE ASUB10-B-T-EACH (4 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

The ULTIMATEASUB10-B-T-EACH active subwoofer made by Origin

Acoustics delivers exceptional low-end frequency extension for

demanding residential installations.

InIn the

the

thethe Box

Box

BoxBox

1 ULTIMATEASUB10-B-T-EACH

Additional

AdditionalAdditional Items

Items

ItemsItems

6 RCA Cable with 90° Angle Connectors

4 Wall Screws

4 Drywall Anchors

4 Round Rubber Feet

2 Elongated Rubber Feet

1 Wall Mount Plate

Installation

InstallationInstallation

Connections

ConnectionsConnections

NOTE

NOTENOTE: Gently pull away the grille from the surface of the subwoofer,

make the connections and then reattach the grille to the front

surface of the subwoofer. Refer to the section Reattach the Grille

for more information.

Mandatory

MandatoryMandatory Connections

Connections

ConnectionsConnections:

1. Connect the analog unbalanced line level audio connection from the

source to LINE IN RCA connector via RCA cable.

2. Connect the IEC power cable to A/C power.

Optional

OptionalOptional Connections

Connections

ConnectionsConnections:

1. Setthe TRIGGER/AUTO switch to TRIGGER. Then, connect the

TRIGGER input to the +12Vtrigger output of the audio source device.

2. Connect the parallel LINE OUT RCA connector to an additional

subwoofer via RCA cable for an extra bass enhancement.

3. Connect the right-angle USB +5V power connection to the optional

wireless signal extension kit.

ULTIMATE

ULTIMATEULTIMATEASUB10-B-T-EACH

ASUB10-B-T-EACH

ASUB10-B-T-EACHASUB10-B-T-EACH QuickStart

Ultimate

UltimateUltimate 10

1010 in.

in.

in.in. Active

Active

ActiveActive Subwoofer,

Subwoofer,

Subwoofer,Subwoofer, Black

Black

BlackBlack Textured,

Textured,

Textured,Textured, Single

Single

SingleSingle

Attach

AttachAttach the

the

thethe Mounting

Mounting

MountingMounting Feet

Feet

FeetFeet

Follow the procedure to attach either set of the included mounting feet

to the subwoofer:

lIf using the elongated, channeled feet for standing the subwoofer up

vertically:

Route the power cable and the RCA cables each through the channels

on their respective feet. Then press the feet onto the bottom edge of

the subwoofer at their respective silkscreen hashmarks to secure

them in place.

lIf using the four rounded feet to lie the subwoofer on its back surface

horizontally:

Screw the four included posts into each of their respective holes at

each corner of the back surface of the subwoofer. Once all four posts

are screwed into place, cover each post with a rubberfoot.

lIf using the four rounded feet to lie the subwoofer on its front

surface:

Remove the grille from the posts that are already installed and then

cover those posts with the rounded feet.

Wall

WallWall Mount

Mount

MountMount

Follow the procedure to mount the subwoofer to a wall:

1. Hold the included mounting bracket against the wall and use a pencil

to lightly mark the position of the screw holes.

2. Drill holes at the marked screw hole locations and install the four

included drywall anchors.

3. Secure the mounting bracket to the wall using the screws.

4. Screw the four included posts into each of their respective holes at

each corner of the back surface of the subwoofer.

5. Hang the subwoofer on the mounting bracket by fitting the posts

into their respective holes in the bracket.

Reattach

ReattachReattach the

the

thethe Grille

Grille

GrilleGrille

Follow the procedure to reattach the grille to the front surface of the

subwoofer.

1. Place the grille over the front surface of the subwoofer so all the

openings in the columns at each corner of the grille align with their

respective posts.

2. Gently press the grille into place, applying pressure at the corners

over where the posts from the subwoofer will slide into the columns

of the grille. It avoids warping the grille as you push it towards the

subwoofer.

ULTIMATE

ULTIMATEULTIMATEASUB10-B-T-EACH

ASUB10-B-T-EACH

ASUB10-B-T-EACHASUB10-B-T-EACH QuickStart

Ultimate

UltimateUltimate 10

1010 in.

in.

in.in. Active

Active

ActiveActive Subwoofer,

Subwoofer,

Subwoofer,Subwoofer, Black

Black

BlackBlack Textured,

Textured,

Textured,Textured, Single

Single

SingleSingle

Set

SetSet the

the

thethe Switches

Switches

SwitchesSwitches and

and

andand Knobs

Knobs

KnobsKnobs

The following section provides information on how to use the switches

and knobs.

lUse the POWER switch to toggle between OFF and ON/STANDBY.

lOn the TRIGGER/AUTO switch,

oTRIGGER/AUTO set to TRIGGER – the unit will turn ON from

STANDBY when the +12V trigger is detected.

oTRIGGER/AUTO set to AUTO – the unit will turn ON from

STANDBY when the signal at the LINE IN connection passes the

signal detection threshold.

lUse the POLARITY switch for applications where the subwoofer is

facing in a direction opposite to the other driversin the listening

environment.

oPOLARITY set to 0 degrees – the polarity of the incoming input

signal is maintained at the output of the subwoofer.

oPOLARITY set to 180 degrees – the polarity of the incoming input

signal is inverted at the output of the subwoofer.

lUse the LFE/CROSSOVER switch to determine whether the

subwoofer’s internal crossover should be included in the signal chain.

oLFE/CROSSOVER set to LFE – the internal crossover is not

included in the signal chain and the input signal must be filtered

using an external Low Pass processor.

oLFE/CROSSOVER set to CROSSOVER – the internal crossover is

included in the signal chain and whatever frequency is selected on

the CROSSOVER knob will be the center frequency for this Low

Pass.

lUse the CROSSOVER knob to select the rolloff frequency of the low-

pass filter for when the LFE/CROSSOVER switch is set to

CROSSOVER.

Test out various values on this knob (in conjunction with the VOLUME

knob) to achieve the optimal low end response for the acoustic

environment on site.

lUse the VOLUME knob to set the output level of the subwoofer.

Power

PowerPower the

the

thethe Unit

Unit

UnitUnit On

OnOn

The following section provides information on how to use Power switch.

lThe power switch will put the unit into either an ON/STANDBY or an

OFF state.

lIn ON/STANDBY, the subwoofer will change state depending on the

setting of the TRIGGER/AUTO switch.

On the TRIGGER/AUTO switch,

oTRIGGER/AUTO set to TRIGGER – the unit will turn ON from

STANDBY when the +12V trigger is detected.

oTRIGGER/AUTO set to AUTO – the unit will turn ON from

STANDBY when the signal at the LINE IN connection passes the

signal detection threshold.

ULTIMATE

ULTIMATEULTIMATEASUB10-B-T-EACH

ASUB10-B-T-EACH

ASUB10-B-T-EACHASUB10-B-T-EACH QuickStart

Ultimate

UltimateUltimate 10

1010 in.

in.

in.in. Active

Active

ActiveActive Subwoofer,

Subwoofer,

Subwoofer,Subwoofer, Black

Black

BlackBlack Textured,

Textured,

Textured,Textured, Single

Single

SingleSingle

Especificaciones del producto

Marca:	Crestron
Categoría:	Vocero
Modelo:	ULTIMATE ASUB10-B-T-EACH
Color del producto:	Wit
Peso.:	7620 g
Ancho:	505.4 mm
Profundidad:	424.1 mm
Altura:	134.6 mm
Nivel de ruido:	- dB
Manual de usuario:	Ja
Fuente-de-alimentación:	AC
Relación de aspecto original:	16:10
Estándares wifi:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
red LAN:	Ja
Modos de vídeo compatibles:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Cables suministrados:	AC
Distancia focal fija:	18.2 mm
Relación de contraste típica:	500000:1
Capacidad de zoom:	Ja
Brillo del proyector:	5000 ANSI lumens
Tecnología de proyección:	3LCD
Resolución nativa del proyector:	1080p (1920x1080)
Corrección Keystone, vertical:	-30 - 30 °
Corrección Keystone, horizontal:	-30 - 30 °
Adecuado para tamaños de pantalla:	30 - 300 "
Número de colores:	1,07 miljard kleuren
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	2
Número de puertos HDMI:	2
Tipo de conexión en serie:	RS-232C
Audio-ingan (L, R):	1
Entrada de vídeo compuesto:	1
Tipo de conector HDMI:	Volledige grootte
Número de puertos Ethernet LAN (RJ-45):	1
tipo de zoom:	Handmatig
Vida útil de la fuente de luz.:	20000 uur
Tipo de fuente de luz:	Laser
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Altavoces incorporados:	Ja
Energía promedio:	16 W
Consumo de energía (en espera):	- W
Número soportado de baterías/baterías:	2
Certificación:	UL 60950-1 / cUL, FCC part 15 subpart B Class B
Relación de zoom:	1.6:1
Relación de lanzamiento:	1.3 - 2.1:1
Formato de señal analógica:	NTSC, PAL, NTSC 4.43, PAL M, PAL N, SECAM
Full HD:	Ja
HDCP:	Ja
Resoluciones de gráficos compatibles:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+)
Número de DisplayPorts:	1
Entrada de PC (D-Sub):	Ja
Vida útil de la fuente de luz (modo de ahorro):	50000 uur
Altura operativa:	0 - 3000 m
Sincronización horizontal (min):	15 kHz
Sincronización horizontal (máx.):	106 kHz
Sincronización vertical (min):	50 kHz
Sincronización vertical (máx.):	120 kHz
Número de puertos USB 2.0 Tipo-B:	1
Mando a distancia incluido:	Ja
Wifi.:	Ja
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	370 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Baterias-incluidas:	Ja
Tipo-producto:	Projector met normale projectieafstand
Tipo de Batería:	AA
Código del Sistema Armonizado (SA):	85286200