Crunch DSX52 Manual de Usario

Crunch Speaker DSX52

Lee a continuación 📖 el manual en español para Crunch DSX52 (4 páginas) en la categoría Speaker. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
B E N U T Z E R H A N D B U C H
O W N E R ,S M A N U A L
L O U D S P E A K E R S
D S X 4 2
D S X 5 2
D S X 6 2
D S X 4 6 2
D S X 5 7 2
D S X 6 9 3
D S X 3 2 D S X 1 2 0
WICHTIG!
Bitte achten Sie unbedingt auf die korrekte Polarität (+ oder –) aller Anschlüsse und Verbindungen.
INSTALLATION DER LAUTSPRECHER
Der erste Schritt bei der Installation des Lautsprecher Systems sollte die sorgfältige Planung sein.
Wählen Sie eine geeignete Stelle für den Einbau sorgfältig aus. Beachten Sie die folgenden Vorschläge,
um das bestmögliche Resultat zu erreichen.
1. Wählen Sie r die Lautsprecher eine Position, bei der das Signal am besten ohne Hindernisse im
Fahrgastraum verteilt wird. Beachten Sie dabei die Position der Fahrersitze, Nackenstützen und anderer
Aufbauten im Innenraum des Autos.
2. Montieren Sie die Lautsprecher auf der linken bzw. rechten Seite in der gleichen Anordnung. Vermeiden
Sie wenn glich, dass ein Lautsprecher her, tiefer, weiter weg oder her wie der dazu
gegenüberliegende Lautsprecher montiert wird.
3. Überprüfen Sie vor dem Bohren von Montagelöchern für die Lautsprecherkomponenten immer, was
sich hinter der gewählten Montagefläche befindet. Bitte beschädigen Sie auf keinen Fall
Fensterhebevorrichtungen, Kabelbäume, den Benzintank oder andere Fahrzeugteile.
4. Sie erreichen das beste Klangresultat, wenn die Lautsprecher fachgerecht in einer vorgesehenen
Lautsprecheröffnung eines rpanel oder einer Heckablage fest montiert werden. Lücken oder lose
Stellen zwischen Lautsprecherkorb und der Montagefläche sollten abgedämmt bzw. geschlossen
werden.
ANSCHLUSS DER LAUTSPRECHER
Verbinden Sie die Plus-Anschlüsse (”+”) bzw. die Minus-Anschlüsse (”–”) der Lautsprecher
mit den entsprechenden Lautsprecher-Ausgängen des Verstärkers.
Verwenden Sie zum Anschliesen die beiliegenden Kabel mit Stecker.
DEUTSCH
ANSCHLÜSSE
FÜR DEN VERSTÄRKER
LINKER KANAL
LAUTSPRECHER LINKS
ANSCHLÜSSE
FÜR DEN VERSTÄRKER
RECHTER KANAL
LAUTSPRECHER RECHTS
IMPORTANT
Please observe the correct polarity (+ and –) of all connections.
INSTALLATION
The first step of installing a speaker system is a well-thought-out planning. Choose a suitable location
for your speaker components carefully. Please observe the following suggestions to ensure proper
results and best performance:
1. Choose a location which offers none or just a minimum of obstacles between the components and
your ears. Please observe at thereto, the positions of the drivers seat, the headrests and other
constructions of the inside of vehicle interior.
2. Mount the left and right speakers in the same array on each side, which means that they are installed
at the same height and directly across from each other. Do not install one speaker higher, lower, further
forward or further back from the opposite speaker.
3. Always check what’s behind the chosen mounting locations to ensure that there is proper clearance
for the back of the speaker components and avoid obstructions such as window tracks, wire harnesses,
gas tank etc.
4. The best performance will be achieved, when the speakers are securely mounted to a designated
speaker opening in a door panel or a rear speaker shelf. There should be no gaps between the speaker
basket and the mounting surface.
SPEAKER INTERCONNECTION
• Connect the positive terminals (”+”) and the negative terminals (”–”) of the speakers
with the according speaker outputs of the amplifier.
• Use for the interconnection the supplied cables with jacks.
ENGLISH
SPEAKER LEFT SPEAKER RIGHT
TERMINALS FOR THE
AMPLIFIER CONNECTION
LEFT CHANNEL
TERMINALS FOR THE
AMPLIFIER CONNECTION
RIGHT CHANNEL

Especificaciones del producto

Marca: Crunch
Categoría: Speaker
Modelo: DSX52
Color del producto: Zwart, zilver
Cargador: Ja
Incluye estación base: Ja
Tiempo de uso: 60 min
Cepillo de limpieza: Ja
Longitud mínima del cabello: 0.5 mm
Longitud máxima del cabello: 36 mm
Recargable: Ja
Vino: Ja
Indicación de carga de batería: Ja
Incluyendo aceite: Ja
voltaje-de-entrada-de-CA: 230 V
Frecuencia-de-entrada-de-CA: 50 Hz

¿Necesitas ayuda?

Si necesitas ayuda con Crunch DSX52 haz una pregunta a continuación y otros usuarios te responderán




Speaker Crunch Manuales

Speaker Manuales

Últimos Speaker Manuales

OSD Audio

OSD Audio LS2 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-2668 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR-L Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1120W Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-105 Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1110W Manual de Usario

19 Septiembre 2024
AXESS

AXESS SPBT1031 Manual de Usario

18 Septiembre 2024