CRUX DKGM-C2S Manual de Usario

Lee a continuación 📖 el manual en español para CRUX DKGM-C2S (8 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092921
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
1 of 8
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
- Supports Bose, Y-91 and non-amplied audio systems.
- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.
- Retains RAP (Retained Accessory Power).
- Single DIN Dash Kit included.
- EIA color coded wiring for easy installation.
DKGM-C2S MODULE DKGM-C2S HARNESS SINGLE DIN DASH KIT
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
2 of 8
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
SELECTING THE AUDIO SYSTEM:
If the vehicle is equipped with an amplied audio system, the DKGM-C2S has a built-in audio level
adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use this
feature, plug in the male 8-pin connector on the DKGM-C2S harness to the GRAY female 8-pin connector
on the DKGM-C2S module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see
picture below)
If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the
BLACK female 8-pin on the DKGM-C2S module.
Non-BOSE
(Non-Amplied)
Connecon
BOSE
(Amplied)
Connecon
CHIME VOLUME ADJUSTMENT:
The DKGM-C2S has a potentiometer to adjust the chime volume. It is set at half way by default. To
adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase
the volume and counter-clockwise to decrease the volume.
Chime
Volume
Adjustment
rev.092921
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
3 of 8
DASH KIT INSTALLATION:
DKGM-C2S
Radio Replacement with Single DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
RA D I O R E P L ACE M E N T
+
R
INTERFACING SOLUTIONS
Please make sure that you have all the parts as shown.
rev.092921

Especificaciones del producto

Marca: CRUX
Categoría: Niet gecategoriseerd
Modelo: DKGM-C2S

¿Necesitas ayuda?

Si necesitas ayuda con CRUX DKGM-C2S haz una pregunta a continuación y otros usuarios te responderán




Niet gecategoriseerd CRUX Manuales

CRUX

CRUX WVI-H Manual de Usario

18 Septiembre 2024
CRUX

CRUX WVIGM-04M Manual de Usario

18 Septiembre 2024
CRUX

CRUX RFM-WR1 Manual de Usario

18 Septiembre 2024
CRUX

CRUX RFM-UC1 Manual de Usario

18 Septiembre 2024
CRUX

CRUX RFM-TYT Manual de Usario

18 Septiembre 2024
CRUX

CRUX RFM-FD8 Manual de Usario

18 Septiembre 2024
CRUX

CRUX RFM-RAM1 Manual de Usario

18 Septiembre 2024
CRUX

CRUX PCM-3 Manual de Usario

18 Septiembre 2024
CRUX

CRUX RVCAD-81 Manual de Usario

18 Septiembre 2024
CRUX

CRUX RVCAD-81H Manual de Usario

18 Septiembre 2024

Niet gecategoriseerd Manuales

Últimos Niet gecategoriseerd Manuales