CRUX RVCGM-80C Manual de Usario

CRUX No categorizado RVCGM-80C

Lee a continuación 📖 el manual en español para CRUX RVCGM-80C (8 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
1 of 8
- Automacally switches to rear-view when vehicle is put in reverse gear.
- Provides reverse camera input.
- Adds 3 Audio/Video inputs.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
RVCGM-80C
Module
Remote Control Power Harness
IR Extension Cable LVDS Cable A/V Cable
Camera Power Harness Push Buon Switch
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
2 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION DIAGRAM:
AV1
AV2
LVDS
Output
AV3
AV OUT
+12V ACC
GROUND
Fuse Box
Connect to Blue
Mini USB Plug from
HMI Module
Plug to HMI
Module
RGB CABLE
IR REMOTE CABLE
PUSH BUTTON SWITCH
CAMERA POWER
+12V GROUND
DIP SWITCHES
Sig tli e
REAR-VIEW INTEGRATION
RVCGM-80C
24-PIN
POWER PLUGSTATUS LED
24-Pin
Audio/Video
IN/OUT
GM-80C LVDS
T-HARNESS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082718
3 of 8
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
RVCGM-80C
Follow these steps to properly install the interface module. Note that this interface connects to the HMI Module.
Rear View Integration Interface for Select
GM Vehicles with CUE, Intellilink and MyLink Systems
INSTALLATION INSTRUCTIONS:
1. Remove the GLOVE BOX to gain access to the factory HMI module. The HMI module is located in dierent areas
depending on the vehicle model. Below is a list of vehicles and where the HMI module can be located:
Cadillac ATS/CTS = below the glove box
Cadillac SRX = below or behind the glove box
Corvee = driver side kick panel
Once you have located the HMI module, unplug the BLUE LVDS connector. You will need to plug this to the
RVCGM-80C Main Interface Module.
Factory LVDS
Connector
2. Using the provided 24-Pin Power Harness, connect the loose wires on the 24-Pin as menoned below. You can
tap Accessory power from the cigaree lighter (+12V switched) posion.
NOT ALL LOOSE WIRES ON THE
24-PIN CONNECTOR ARE USED Factory Mini USB (LVDS)
connecons are mostly
located on the MyLink
System box.
RED = Accessory
BLACK = Ground
BLUE = Parking
GRAY = Reverse Input
3. Aer making the connecons on the 24-Pin harness, insert the 24-Pin into the Main Interface module. Make
sure that the connector is properly seated into the module.

Especificaciones del producto

Marca: CRUX
Categoría: No categorizado
Modelo: RVCGM-80C

¿Necesitas ayuda?

Si necesitas ayuda con CRUX RVCGM-80C haz una pregunta a continuación y otros usuarios te responderán




No categorizado CRUX Manuales

CRUX

CRUX SOOGM-16 Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKGM-16W Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52B Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52 Manual de Usario

19 Septiembre 2024
CRUX

CRUX ACP-MAX Manual de Usario

19 Septiembre 2024
CRUX

CRUX RFM-MG1 Manual de Usario

19 Septiembre 2024
CRUX

CRUX SOCGM-18L Manual de Usario

19 Septiembre 2024
CRUX

CRUX SWRGM-49L Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVICH-03M Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVIFD-02F Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales