CRUX UC-1 Manual de Usario

Lee a continuación 📖 el manual en español para CRUX UC-1 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
Adds reverse camera input in Uconnect systems.
Works on diesel powered trucks.
Plug and Play.
- Not compatible with vehicles with heated seats or steering wheel.
Uconnect 8.4” Screen with 52-Pin connector
Screen 6-button/2-knob with 52-Pin connector Uconnect 5”
-button/2-knob with 52-Pin connector Uconnect 4.3” Screen 6
UC-1
Harness
UC-1 Interface Module
rev.031220
1/4
UC-1 Interface Module
UC-1 Harness
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
ON
ON
OFF
OFF
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
*With DIP set to OFF, the green wire is used to activate selective video- -motion function. # 1 in
DIP switch functions of the -1 UC
DIP Activate Video in Motion 1
DIP Activate Rear-view camera 2
DIP no function 3
DIP no function 4
DIP CAN-bus termination resistor on the vehicle side 5
DIP CAN-bus termination resistor on the head-unit side 6
NOTE: If after installing the UC-1 on an 8.4 screen and the factory Bluetooth microphone audio is
low, set the DIP switches to: 1-ON, 2-ON, 3-OFF, 4-OFF, 5-ON, 6- .ON
Pin-assignment (8pin Molex)
Cable colour
Pin-No.
Assignment
Yellow
Pin 4
CAN-HIGH connection to the head-unit
Blue
Pin 3
CAN-LOW connection to the head-unit
Yellow/Black
Pin 8
CAN-HIGH connection to the vehicle
Blue/Black
Pin 7
CAN-LOW connection to the vehicle
Red
Pin 1
+12V Constant
Black
Pin 5
Ground
Green
Pin 6
Activation of the video- -motion function in
(+12V =Video in Motion, only if DIP1=OFF)
White
Pin 2
Reverse Trigger output (+12V DC 500mA)
(only if DIP2=ON and reverse gear engaged)
rev.031220
2/4
Connect female 8-pin Molex connector of the UC- harness to male 8pin Molex connector 1
of CAN Interface.
Transfer female 52-pin connector of vehicle harness from rear of the head-unit into male
52-pin connector of the UC- harness. 1
Plug female 52-pin connector of the UC-1 harness into male 52-pin connector on the rear
of the head-unit.
Connections to rear-view camera
Connect the video RCA of the rear-view camera to the female RCA connector of the -UC 1
harness .
Connect the white wire of the UC- harness to the camera power supply (+12V max 500mA). 1
The white wire gets power when the reverse gear is engaged.
rev.031220
3/4
Connecting the CAN interface to the factory Navigation
UC-1
Harness
UC-1
Harness
+12V camera output
(max 500mA)
white wire

Especificaciones del producto

Marca: CRUX
Categoría: No categorizado
Modelo: UC-1

¿Necesitas ayuda?

Si necesitas ayuda con CRUX UC-1 haz una pregunta a continuación y otros usuarios te responderán




No categorizado CRUX Manuales

CRUX

CRUX SOOGM-16 Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKGM-16W Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52B Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52 Manual de Usario

19 Septiembre 2024
CRUX

CRUX ACP-MAX Manual de Usario

19 Septiembre 2024
CRUX

CRUX RFM-MG1 Manual de Usario

19 Septiembre 2024
CRUX

CRUX SOCGM-18L Manual de Usario

19 Septiembre 2024
CRUX

CRUX SWRGM-49L Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVICH-03M Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVIFD-02F Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales