CRUX WVITY-01 Manual de Usario

CRUX No categorizado WVITY-01

Lee a continuación 📖 el manual en español para CRUX WVITY-01 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
R
INTERFACING SOLUTIONS
A/V
SERIES
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.031221
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
1 of 6
- Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM screen.
- Provides an audio/video input which can also be used to add a camera.
- Includes a USB input to play audio and video les.
- Provides a virtual remote control via a smartphone wi connection.
- Dual band (5GHz and 2.4GHz) Wi capability for clear connection.
- Includes HMDI output for high quality video.
- Works with Facetime, Maps, Skype, YouTube, and other apps.
PRODUCT FEATURES:
PARTS INCLUDED:
WORKS WITH:
WVITY-01 Vehicle Harness WVI-H Module Power Harness
Dual Antennas WiFi AV Out Harness AV In / Video Out Harness
IR Extension
iOS 7 and Newer OS 4.2 and Newer
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312212 of 6
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
Wi-Fi
INTERFACE
SEEK
AUDIO
TRACK
PWR VOL
2-PIN
SWC PLUGS
ORANGE/WHITE
WIRE
GROUND
OPTIONAL SWITCH
(Not Included) This toggle switch option
is for vehicles that do not
have Steering Wheel Controls.
28-PIN
16-PIN
10-PIN
1 2 3
ON
1 2 3
ON
DIP SWITCHES
SHOULD
BE ALL “OFF”
HDMI OUTPUT
A/V INPUT
BLUE = A/V TRIGGER*
RED = +12V ACC
BLACK = GROUND
*Connect BLUE A/V Trigger
to +12V to toggle A/V INPUT
A/V Extension
Cable
Video Out
(to extension monitors)
Video Input (or Camera)
Right Audio Input
Left Audio Input
USB Input
INSTALLATION DIAGRAM:
NOTE: The 16-Pin connector is not available on some newer vehicles. You can leave it disconnected if your
vehicle does not have a 16-Pin connector.
INSTALLATION INSTRUCTIONS:
THE AV INTERFACE:
1. Remove the factory radio from the dashboard.
Note: DO NOT disconnect the airbag connector.
2. Remove the factory connectors from behind the factory radio.
3. Mate the T-Harness connecons to the factory connectors. (Make sure all connectors are properly seated
into the interface and into the radio.) (JBL Radios see page 3)
4. Connect the Orange/White wire to your corresponding SWC type. (9-Buon or 5-Buon)
R
INTERFACING SOLUTIONS
A/V
SERIES
1. Connect the 18-Pin power/video cable to the Wi-Fi Interface module.
2. Connect the antenna leads to the module.
3. Connect the RED power lead to +12V ACC and the BLACK wire to Ground.
4. Connect the BLUE A/V Input wire to +12V to trigger the oponal A/V input feature. The video input can also be
connected to a camera source instead. A toggle switch (not included), wired between the BLUE wire and +12V
can be used to switch ON or OFF the A/V input feature.
5. If the USB input feature will be used, you can use the virtual remote control on your smartphone to control the
USB funcons. See VIRTUAL REMOTE secon for details. Extended a USB cable to an easily accessible locaon.
6. Plug in the Composite RCA output of the WVI-H harness to the WVITY-01 AV input.
7. Test for funconality.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312213 of 6
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
SETTING YOUR DEVICE:
With the WVI-H module ON and READY:
For iOS devices:
Open sengs > Select > UnderWi-Fi
‘Choose Network’ “Crux WiFi ***” Select
Aer connecng to Crux Wi, select
“SCREEN MIRRORING” from the Control
Center and tap Crux Wi ***. To access
Control Center, on iPhone X, pull down
from the upper right corner of the screen,
on other iPhone models, pull up from the
boom of the screen.
THE WIFI INTERFACE:
10-PIN JBL RADIOS
Vehicles equipped with a JBL system will not have a 10-Pin connector, you will need to cut three wires from the
10-pin male connector (with female pins) of the WVITY-01 T-harness and connect as follows:
R
INTERFACING SOLUTIONS
A/V
SERIES
NOTES:
1. Does not support Nelix and any DRM protected
les on iOS devices due to Restricons by Apple.
RED = to 12V ACC
YELLOW = to 12V Constant
BLACK = to Ground

Especificaciones del producto

Marca: CRUX
Categoría: No categorizado
Modelo: WVITY-01

¿Necesitas ayuda?

Si necesitas ayuda con CRUX WVITY-01 haz una pregunta a continuación y otros usuarios te responderán


No categorizado CRUX Manuales

CRUX

CRUX SOOGM-16 Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKGM-16W Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52B Manual de Usario

19 Septiembre 2024
CRUX

CRUX DKVW-52 Manual de Usario

19 Septiembre 2024
CRUX

CRUX ACP-MAX Manual de Usario

19 Septiembre 2024
CRUX

CRUX RFM-MG1 Manual de Usario

19 Septiembre 2024
CRUX

CRUX SOCGM-18L Manual de Usario

19 Septiembre 2024
CRUX

CRUX SWRGM-49L Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVICH-03M Manual de Usario

19 Septiembre 2024
CRUX

CRUX WVIFD-02F Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024