D-Link DCS-932L Manual de Usario

Lee a continuación 📖 el manual en español para D-Link DCS-932L (71 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/71
ENGLISH
Quick Install Guide
Wireless N Day/Night Home Network Camera
Thank you for purchasing the DCS-932L Wireless N Day/Night Home Network Camera.
Follow the easy steps in this guide to properly set up your camera. Please verify that all the
package contents below are available.
DCS-932L
If any of the above items are missing, please contact your reseller.
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software upd ates for D-Link products. U.S. and Canadian
customers can contact D-Link Technical Support through our website or by phone.
United States
Telephone: (877) 453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
Copyright ©2010 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely aect wireless signal range. Product specications, size and shape are subject to change without notice, and actual product
appearance may dier from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0(US) | August 20, 2010 6DCS932LQ.01G
Package Contents
DCS-932L Wireless N Day/Night Home Network Camera
Camera Stand and Mounting Kit
CAT-5 Ethernet Cable
Power Adapter
CD with drivers and software
• ComputerwithMicrosoftWindows®7,Vista®,orXP
• PCwith1.3GHzorabove;atleast128MBRAM
• InternetExplorer6orabove,Firefox3.5orabove,Safari4orabove,Chrome2orabove
• Existing10/100Ethernet-basednetworkor802.11nwirelessnetwork
System Requirements
Installation
Step 1:
Connect the included Ethernet cable to the network cable connector located on the
bottom panel of the DCS-932L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the
bottom panel of the DCS-932L and connect it to your wall outlet or power strip. Power is
conrmed when the green LED Power Indicator located below the lens is lit.
Step 3:
Insertthe DCS-932LDriver CD inthe CD-ROM drive.If the CD Autorun function does
not automatically start on your computer, go to > . In the run box typeStart Run
D:\autorun.exe(where D:represents the driveletterof yourCD-ROM drive) andclick
OK. When the autorun screen appears, click and follow the on-screen instructions.Install
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation
Wizard to nish setting up your camera.
Alternatively, you may create a WPS connection if your router or access point supports
WPS. To create a WPS connection:
Step 1:
Press and hold the WPS button on the side of the camera for three seconds. The blue WPS
status LED above the button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some
routers, you may need to log into the web interface and then click an onscreen button to
activate the WPS feature. If you are not sure where the WPS button is on your router or
access point, please refer to your routers user manual.
The DCS-932L will automatically create a wireless connection to your router. While
connecting, the green LED will ash and your camera will reboot.
WPS Setup
After registering your DCS-932L camera with a mydlink account in the Camera Installation
Wizard, you will be able to remotely access your camera from the www.mydlink.com
website. After signing in to your mydlink account, you will see a screen similar to the
following:
Step 1:
Open Internet Explorer and go to http://www.mydlink.com, then sign into mydlink.
Step 2:
Select your camera from the device list, and your camera’s Live View will appear.
mydlink Portal
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2010 by D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation.
Revision Date Description
1.0 November 04, 2010 DCS-932L Revision A1 with rmware version 1.00

Especificaciones del producto

Marca: D-Link
Categoría: Cámara de vigilancia
Modelo: DCS-932L

¿Necesitas ayuda?

Si necesitas ayuda con D-Link DCS-932L haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia D-Link Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales