Dahua Technology ASI7223X-A-T1 Manual de Usario
Dahua Technology
sistema de control de acceso
ASI7223X-A-T1
Lee a continuación 📖 el manual en español para Dahua Technology ASI7223X-A-T1 (76 páginas) en la categoría sistema de control de acceso. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/76
Face Recognition Terminal
User’s Manual
V1.0.1
I
Foreword
General
This manual introduces the installation and basic operation of the Face Recognition Terminal
(hereinafter referred to as "terminal" ).
Safety Instructions
The following categorized signal words with dened meaning might appear in the manual.
Signal Words
Meaning
NOTE
Provides additional information as the emphasis and supplement to the text.
Revision History
Version
Revision Content
Release Date
V1.0.1
Add terminal of model Y.
July 2020
V1.0.0
First Release.
May 2020
About the Manual
The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
We are not liable for any loss caused by the operations that do not comply with the manual.
The manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper manual, CD-ROM, QR code or our ocial
website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, please refer to our nal explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
Please visit our website, contact the supplier or customer service if there is any problem
occurred when using the device.
If there is any uncertainty or controversy, please refer to our nal explanation.
II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the terminal, hazard
prevention, and prevention of property damage. Read these contents carefully before using the
terminal, comply with them when using, and keep them well for future reference.
Operation Requirement
Do not place or install the terminal in a place exposed to sunlight or near the heat source.
Keep the terminal away from dampness, dust or soot.
Keep the terminal installed horizontally on the stable place to prevent it from falling.
Do not drop or splash liquid onto the terminal, and make sure there is no object lled with
liquid on the terminal to prevent liquid from flowing into the terminal.
Install the terminal in a well-ventilated place, and do not block the ventilation of the
terminal.
Operate the terminal within the rated range of power input and output.
Do not dissemble the terminal.
Transport, use and store the terminal under the allowed humidity and temperature
conditions.
For the terminal with a temperature monitoring unit:
Install the temperature monitoring unit in a windless indoor environment, and maintain
the indoor ambient temperature at to . 15°C 32°C
Warm up the temperature monitoring unit for more than 20 minutes after power-on to
enable the temperature monitoring unit to reach thermal equilibrium.
Electrical Safety
Improper battery use might result in re, explosion, or inammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specication.
Use the power adapter provided with the terminal; otherwise, it might result in people injury
and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
Especificaciones del producto
| Marca: | Dahua Technology |
| Categoría: | sistema de control de acceso |
| Modelo: | ASI7223X-A-T1 |
¿Necesitas ayuda?
Si necesitas ayuda con Dahua Technology ASI7223X-A-T1 haz una pregunta a continuación y otros usuarios te responderán
sistema de control de acceso Dahua Technology Manuales
8 Octubre 2024
10 Septiembre 2024
8 Septiembre 2024
26 Agosto 2024
12 Agosto 2024
11 Agosto 2024
10 Agosto 2024
10 Agosto 2024
6 Agosto 2024
sistema de control de acceso Manuales
- sistema de control de acceso Honeywell
- sistema de control de acceso Abus
- sistema de control de acceso Apc
- sistema de control de acceso Acti
- sistema de control de acceso Hikvision
- sistema de control de acceso Viking
- sistema de control de acceso GeoVision
- sistema de control de acceso Marmitek
- sistema de control de acceso Delta Dore
- sistema de control de acceso EQ3
- sistema de control de acceso ASSA ABLOY
- sistema de control de acceso Provision ISR
- sistema de control de acceso IOGEAR
- sistema de control de acceso Suprema
- sistema de control de acceso Speco Technologies
- sistema de control de acceso ZKTeco
- sistema de control de acceso HID Identity
- sistema de control de acceso Panduit
- sistema de control de acceso Indexa
- sistema de control de acceso Gewiss
- sistema de control de acceso SOREX
- sistema de control de acceso Atlantis Land
Últimos sistema de control de acceso Manuales
16 Octubre 2024
6 Octubre 2024
3 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024
1 Octubre 2024