Dahua Technology Lite DH-IPC-HFW1831E-0280 Manual de Usario

Dahua Technology Cámara de vigilancia Lite DH-IPC-HFW1831E-0280

Lee a continuación 📖 el manual en español para Dahua Technology Lite DH-IPC-HFW1831E-0280 (15 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/15

Dahua IR Mini Bullet Network Camera HD

Quick Start Guide

V 1.0.0

Zhejiang Dahua Vision Technology Co., LTD

Welcome

Thank you for purchasing our network cameras.

This user’s manual is designed to be a reference tool for using your product .

Please read the following safeguards and warnings carefully before you use this series product.

Please keep this user’s manual well for future reference.

Important Safeguards and Warnings

Electrical safety

 All installation and operation should conform to your local electrical safety codes.

 The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with rated voltage which conforms to Limited power Source

requirement according IEC60950-1. Please note that the power supply requirement is subject to

the device label.

 Make sure the power supply is correct before operating the device.

 A readily accessible disconnect device shall be incorporated in the building installation wiring

 Prevent the power cable from being trampled or pressed, especially the plug, power socket and the

junction extruded from the device.

 We assume no liability or responsibility for all the ﬁres or electrical shock caused by improper

handling or installation.

Environment

 Do not aim the device at strong light to focus, such as lamp light and sun light, otherwise it might

cause over brightness or light marks, which are not the device malfunction, and aﬀect the longevity

of Charge Coupled Device (CCD) or Complementary Metal-Oxide Semiconductor (CMOS).

 Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the

locations with strong electromagnetic radiation or unstable lighting.

 Keep the camera away from water or other liquid to avoid damages to the internal components.

 Keep the indoor device away from rain or damp to avoid ﬁre or lightning.

 Keep sound ventilation to avoid heat accumulation.

 Transport, use and store the device within the range of allowed humidity and temperature.

 Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

 Pack the device with standard factory packaging or the equivalent material when transporting the

device.

 The device needs to be installed in the location where professional staff can cover (professionals

need to know the attentions of using the device), non-professionals are not allowed to enter device

installation area when the device is operating normally, which may cause accidental damage.

Operation and Daily Maintenance

 Do not directly touch the heat dissipation component of the device to avoid scald.

 Do not dismantle the device because there is no component that can be ﬁxed by users themselves.

Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.

 Please contact after-sale service to replace desiccant when it becomes green. (The desiccant is

not provided by default)

 It is recommended to use the device together with lightning arrester to improve lightning protection

eﬀect.

 is recommended to get the grounding holes to be grounded to enhance the reliability of the It

device.

 Do not directly touch the optic component CCD or CMOS. You can use the air blower to blow away

the dust or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust

gently if necessary.

 Use the dry soft cloth to clean the device. If the is diﬀicult to be removed, please wipe it away dust

with a clean cloth wetted slightly by the mild detergent, and then use the dry cloth to clean the

device. Do not use volatile solvents like alcohol, benzene, thinner, or strong detergent with

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of

the device.

 When installing or using the device, do not directly touch or wipe the surface of the dome cover

because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently

wipe it away. If stained with grease or ﬁngerprint, use soft cloth to gently wipe the water drop or oil

and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked with alcohol or

detergent to wipe from the lens center outward till it is clean.

 We are not liable for any problems caused by unauthorized modiﬁcation or attempted repair.

 The dome cover is a kind of optical component, please do not touch or wipe the cover surface

during installation and application, it may stain dust, grease or ﬁngerprint, you can use absorbent

cotton diethyl ether or use soft cloth to dip some water and then wipe gently. You can to dip some

also use air gun to remove the dust if the cover is stained with dust.

Warnings

 Please strengthen the protection of network, device data and personal information, adopt

necessary measures of guarantee device network security, including but not limited to using strong

password, modifying password regularly, upgrading ﬁrmware to the latest version, isolating

computer network and so on. For the IP camera ﬁrmware of some old version, the ONVIF

password won’t be modiﬁed automatically after the main password of the system is modiﬁed. You

need to upgrade the camera ﬁrmware or upgrade the ONVIF password manually.

 Please modify the default password after login to avoid being stolen.

 Use the standard components provided by manufacturer and make sure the device is installed and

ﬁxed by professional engineers.

 The surface of the image sensor should not be exposed to laser beam radiation in an environment

where a laser beam device is used.

 Do not provide two or more power supply sources for the device; otherwise it might damage the

device.

Especificaciones del producto

Marca:	Dahua Technology
Categoría:	Cámara de vigilancia
Modelo:	Lite DH-IPC-HFW1831E-0280

¿Necesitas ayuda?

Si necesitas ayuda con Dahua Technology Lite DH-IPC-HFW1831E-0280 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Cámara de vigilancia Dahua Technology Manuales

Dahua Technology Ultra IPC-HFW7442H-Z4 Manual de Usario

21 Octubre 2024

Dahua Technology IPC-HFW7842H-Z Manual de Usario

19 Octubre 2024

Dahua Technology Ultra IPC-HF7842F Manual de Usario

8 Octubre 2024

Dahua Technology SD6C230I-HC Manual de Usario

7 Octubre 2024

Dahua Technology Lite IPC-HDW1320S Manual de Usario

4 Octubre 2024

Dahua Technology Ultra IPC-HF7442F-FR Manual de Usario

4 Octubre 2024

Dahua Technology SD49225T-HN-W Manual de Usario

23 Septiembre 2024

Dahua Technology DH-HAC-HDW1230T-Z Manual de Usario

21 Septiembre 2024

Dahua Technology Pro HAC-HFW2221SP-0280B Manual de Usario

17 Septiembre 2024

Dahua Technology N83BU82 Manual de Usario

16 Septiembre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024

Vivotek AI-108 Manual de Usario

27 Octubre 2024

Acti E88 Manual de Usario

27 Octubre 2024

Yale WIPC-303W Manual de Usario

27 Octubre 2024

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024

Airlive DM-720 Manual de Usario

27 Octubre 2024

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024

Grandstream GXV3615W Manual de Usario

27 Octubre 2024

Vivotek IP8133 Manual de Usario

27 Octubre 2024

Olympia OC 1280P Manual de Usario

27 Octubre 2024