Danfoss TP9000 Si Manual de Usario
Danfoss
Termostato
TP9000 Si
Lee a continuación 📖 el manual en español para Danfoss TP9000 Si (2 páginas) en la categoría Termostato. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/2
TP9000 Si
User Instructions
A. Setting the correct Time and Day
Fig. 1
B. Accepting the Factory Settings
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Before beginning programming, you should reset the unit. Open the flap on the front
of the clock. Press the RESET button using a non-metallic object (e.g. end of a bic biro
pen top). (Fig 1)
The time and date are factory set and do not need to be set.
The TP9000 comes ready programmed with a set of Hot Water times and Central Heating
times and temperatures to suit the average household. If you wish to alter these settings
follow instructions below.
Your unit is set to operate in 7 day mode.
7 day – different settings for each day of the week
Please follow the instructions below:
C. Programming your central heating - 7 day mode
• A)Press the CH/HW button until the CH mode is selected (Fig 2a)
• B) Press PROG to show the 1st pre-set time and temperature (Event 1 Mon) (Fig 2b)
• C) Use + or – buttons to adjust the TIME (press and hold to change in 10 min
increments). (Fig 3)
• D) Use Λ or V buttons to adjust the TEMPERATURE. (Fig 4)
• E) Press NEXT to move to next preset time & temp (Event 2) (Fig 5)
• F) Repeat steps c, d and e for programming Events 3, 4, 5 & 6.
• G) to select the next day, press DAY/HOL and repeat steps c, d, and e (Fig 6)
• H) repeat process as necessary to complete programming for all 7 days
To return to normal operating mode press and hold PROG until screen returns to the current
time. (Fig 7)
(a)
(b)
The TP9000 is a programmable room thermostat with combined hot water time
control.
A programmer allows you to set On and Off time periods to suit the lifestyle of the
occupier.
A room thermostat works by sensing the air temperature, switching on the heating
when the air temperature falls below the thermostat setting, and switching it off
once this set temperature has been reached. A programmable room thermostat
lets the occupier choose what times they want the heating to be on and what
temperature it should reach while it is on. It will allow you to select different
temperatures in your home at different times of the day (and days of the week) to
meet your particular needs.
The TP9000 controller is also unique in that it also controls the hot water timings in
your home.
D. Programming your hot water - 7 day mode
• A)Press the CH/HW button until the HW mode is selected (Fig 8)
• B) Press PROG to show the 1st pre-set time (Event 1 Mon)
• C) Use + or – buttons to adjust the TIME (press and hold to change in 10 min
increments). (Fig 9)
• D) Press NEXT to move to next preset time(Event 2) (Fig 10)
• E) Repeat steps c and d for programming Events 3, 4, 5 & 6.
• F) To select the next day, press DAY/HOL and repeat steps c, d, and e (Fig 11)
• G) Repeat process as necessary to complete programming for all 7 days
To return to normal operating mode press and hold PROG until screen returns to the current time.
(Fig 12)
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Part No. V2 02/18
Fig. 8
Fig. 9
Temperature
adjust buttons
+hour boost
buttons
(a)
(b)
E. Temporary User Overrides
Central Heating:
(ensure Central Heating mode is selected by using the CH/HW button)
• Temporarily alter the current programmed temperature: Simply press Λ
and V until the required temperature is selected. The unit will now maintain this
setting until the start of the next timed event at which point it will revert to pre-
programmed user settings. (Fig 13)
• Temporarily override the current time period: Pressing the +HRS BOOST button
will extend the current time/temperature period for 1,2 or 3 hours depending on
how many times it is pressed. At the end of the extended period normal operation
resumes. (Fig 13)
• Frost Protection Mode: Pressing Λ and V together puts the unit in frost protection
mode. A constant low temperature can be selected and this will be maintained until
Λ and V is pressed again to resume normal operation. (Fig 13)
Hot water:
Temporarily override the current time period: Pressing the +HRS BOOST button will
extend the current time period for 1,2 or 3 hours depending on how many times it is
pressed. At the end of the extended period normal operation resumes.
Indicates that unit is in ALLDAY or AUTO mode with 2 events per day for 1
On/Off for Hot Water.
Indicates that the unit is in AUTO mode with 4 events per day for heat or 2
ON/OFF for Hot Water.
Indicates that the unit is in AUTO mode with 6 events per day for heat or 3 for
Hot Water.
ON Indicates Hot Water is permanently on (Applies to Hot Water only)
OFF Indicates permanently off for Hot Water or Thermostat mode (see 2.5 on page
16) for Heating
The INFO button is used to display information about either the next
programmed event for the currently selected mode (central Heating or Hot
Water) to display the outdoor temperature (if outdoor sensor is fitted) and to
show the Service Due Date if set.
Guide to symbols
i
Especificaciones del producto
| Marca: | Danfoss |
| Categoría: | Termostato |
| Modelo: | TP9000 Si |
¿Necesitas ayuda?
Si necesitas ayuda con Danfoss TP9000 Si haz una pregunta a continuación y otros usuarios te responderán
Termostato Danfoss Manuales
27 Octubre 2024
6 Octubre 2024
5 Octubre 2024
23 Septiembre 2024
17 Septiembre 2024
9 Septiembre 2024
6 Septiembre 2024
4 Septiembre 2024
1 Septiembre 2024
Danfoss Ally - Radiator Thermostat Thermostaat Manual de Usario
1 Septiembre 2024Termostato Manuales
- Termostato ATAG
- Termostato Bosch
- Termostato AEG
- Termostato Panasonic
- Termostato Honeywell
- Termostato Junkers
- Termostato Nefit
- Termostato Remeha
- Termostato Siemens
- Termostato Vaillant
- Termostato Ambiano
- Termostato Amfra
- Termostato Google
- Termostato GE
- Termostato Renkforce
- Termostato Itho
- Termostato De Dietrich
- Termostato TP Link
- Termostato Elro
- Termostato EMOS
- Termostato Truma
- Termostato Intergas
- Termostato Energenie
- Termostato Schneider
- Termostato Hama
- Termostato Fenix
- Termostato Theben
- Termostato AVM
- Termostato Elektrobock
- Termostato Devi
- Termostato Stiebel Eltron
- Termostato Buderus
- Termostato Velleman
- Termostato Dimplex
- Termostato Emerson
- Termostato Vemer
- Termostato Profile
- Termostato Magnum
- Termostato Horstmann
- Termostato Salus
- Termostato Tylö
- Termostato Somfy
- Termostato Grohe
- Termostato Corberó
- Termostato Oventrop
- Termostato King
- Termostato Technoline
- Termostato Devolo
- Termostato Arnold Rak
- Termostato Heatmiser
- Termostato Viessmann
- Termostato Carrier
- Termostato Nest
- Termostato Itho-Daalderop
- Termostato Hive
- Termostato Saunier Duval
- Termostato Netatmo
- Termostato Seitron
- Termostato Hager
- Termostato Sygonix
- Termostato TFA
- Termostato Tado
- Termostato Hunter
- Termostato Plieger
- Termostato Busch-Jaeger
- Termostato Zehnder
- Termostato Bulex
- Termostato UPM
- Termostato Optima
- Termostato AWB
- Termostato Finder
- Termostato Xavax
- Termostato Fantini Cosmi
- Termostato Delta Dore
- Termostato Orbis
- Termostato Boneco
- Termostato EBERLE
- Termostato Grasslin
- Termostato Gira
- Termostato Jung
- Termostato Basetech
- Termostato Wolf
- Termostato HQ
- Termostato Max
- Termostato Eneco
- Termostato Frico
- Termostato Vasco
- Termostato Radson
- Termostato Nobo
- Termostato Baxi
- Termostato Fibaro
- Termostato Nexa
- Termostato EQ3
- Termostato Homematic IP
- Termostato Go Green
- Termostato Weishaupt
- Termostato REMKO
- Termostato ICY
- Termostato HomeMatic
- Termostato Computherm
- Termostato Avidsen
- Termostato SPC
- Termostato Crestron
- Termostato ORNO
- Termostato Berker
- Termostato Drayton
- Termostato Westfalia
- Termostato Heatit
- Termostato 2Heat
- Termostato Bryant
- Termostato Watts
- Termostato Eqiva
- Termostato Etherma
- Termostato Veria
- Termostato Emmeti
- Termostato Eurotronic
- Termostato Oregon Scientific
- Termostato Muller
- Termostato Worcester-Bosch
- Termostato Econo-Heat
- Termostato VDH
- Termostato Vimar
- Termostato PECO
- Termostato IR-V
- Termostato H-Tronic
- Termostato EasyTemp
- Termostato Elgato
- Termostato Intertechno
- Termostato Schwaiger
- Termostato Helios (Amfra)
- Termostato EQ-3
- Termostato Tru Components
- Termostato Emko
- Termostato Easy Timer
- Termostato Z-Wave
- Termostato Hugo Muller
- Termostato IMIT
- Termostato Innogy
- Termostato Wallair
- Termostato Maico
- Termostato Levica
- Termostato HomePilot
- Termostato Ouellet
- Termostato Techno Line
- Termostato THERMAFLEX
- Termostato Wachendorff
- Termostato Yokis
- Termostato ChiliTec
- Termostato Eliwell
- Termostato Plugwise
- Termostato Johnson Control
- Termostato Webasto
- Termostato Drayton Erie
- Termostato OJ ELECTRONICS
- Termostato Tellur
- Termostato RWE
- Termostato Lowes
- Termostato Jumo
- Termostato Warmup
- Termostato Qubino
- Termostato STI
- Termostato ELKO
- Termostato TrickleStar
- Termostato Gewiss
- Termostato Sinustec
- Termostato Rose LM
- Termostato Otio
- Termostato MundoControl
- Termostato Enda
- Termostato Bearware
- Termostato GENERAL Life
- Termostato Oreg
Últimos Termostato Manuales
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024