Datalogic Memor 10 Healthcare Manual de Usario

Lee a continuación 📖 el manual en español para Datalogic Memor 10 Healthcare (2 páginas) en la categoría Lector de código de barras. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2018-2019 Datalogic S.p.A. and/or its affiliates
  All rights reserved. Without limiting the rights under copyright, no part of this documentation may be
reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or
for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of
Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this
documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation. Should future revisions of this manual
be published, you can acquire printed versions by contacting your Datalogic representative. Electronic
versions may either be downloadable from the Datalogic website ( ) or provided on www.datalogic.com
appropriate media. If you visit our website and would like to make comments or suggestions about this or
other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and
accurate, however, Datalogic reserves the right to change any specification at any time without prior
notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may
be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google
LLC.
Patents
See for patent list.www.patents.datalogic.com
Reference Documentation
For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 User’s
Manual, downloadable from our website .www.datalogic.com
Support Through the Website
Datalogic provides several services as well as technical support through its website.
Log on to and click on the link which gives you access to:www.datalogic.com SUPPORT
Downloads by selecting your product model from the dropdown list in the Search by Product field for
specific Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable
etc.) from date of purchase at our company.
Memor™ 10
Rugged Mobile Computer
with 1D/2D Imager
Quick Start Guide
822002751 (Rev. A) Jan. 2019
See the Safety & Regulatory Addendum
included with your product for additional
regulatory, safety and legal information.
中文版快速使用指南及法律折页,请见
Datalogic : www.datalogic.com 官网
The chinese version of the Quick Start
Guide and the Safety & Regulatory
addendum is downloadable from the
Datalogic website: www. datalogic.com
(see .Support Through the Website)
©2018-2019 Datalogic S.p.A. and/or its
affiliates. All rights reserved. Datalogic
and the Datalogic logo are registered
trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
www.datalogic.com
Out of the Box
The Memor 10 package contains:
Memor 10 PDA
Rechargeable one-piece battery pack
USB Type-C cable
Handstrap
Quick Start Guide
Safety & Regulatory Addendum
End User License Agreement (EULA) Sheet
Remove all the components from their packaging; check their integrity and
compare them with all the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper packaging
is not covered under the warranty.
CAUTION
General View
Touch Panel
Display
Recent
Charging LED Good Read
Indicator
Home
Back
Front View
TOF Sensor
LED Flash
Speaker
Battery
Swap LED
MicroSD Card
Socket
SIM Card
Socket
Back View
Top View
Data Capture
Window
Side View
Right Trigger Left Trigger
Power Button
USB Type-C Port
Volume Control
Buttons
Charge with the Dock
Insert the device into the dock with the screen facing front and the head facing up.
Use only the Datalogic power supply 94ACC0197 to power any of the docks.
CAUTION
Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot
of any of the docks.
Do not apply any sticker to the Memor 10 (see the examples below).
CAUTION
For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to
the Quick Start Guide included in the dock's box.
NOTE
The Memor 10 may get warm during charging. This is normal and does not mean a malfunction.
NOTE
SIM Card Installation
1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details).
2. Remove the battery pack (see ):Battery Installation
3. Insert the SIM card with the written part upward.
4. Replace the battery (see ).Battery Installation
MicroSD Card Installation
1. Turn off the Memor 10 or put it in swap battery mode (refer to the User’s Manual for more details).
2. Remove the battery pack (see ):Battery Installation
3. Insert the microSD card with the written part upward.
4. Replace the battery (see ).Battery Installation
Scanning and Imaging
2D Imager Data Capture
To scan a bar code symbol:
1. Point the scan window at the bar code.
2. Press one of the scan triggers. A blue-violet spot illuminates the symbol, which is captured and
decoded.
If the scan has been successful:
If enabled, the good read beep plays.
If enabled, the GreenSpot projects a green spot onto the bar code image.
If enabled, the good read indicator positioned at the top left side of the display glows solid green.
Battery Installation
1. Rotate the latches to the open position:
2. Insert the battery pack into the slot, bottom first, and press it into place:
3. Rotate the latches to the lock position to lock the cover:
Charging Instructions
The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or
with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger).
During the charging process the charging LED positioned at the top left side of the display glows red
constantly. Once the charging process has been completed, the charging LED glows green constantly.
Charge with USB
Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to
charge the device from a power outlet.
The charger is modular, with one adapter and five switchover plugs.
You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on
a computer.
Use only the Datalogic power supply 94ACC0196 to power the Memor 10.
CAUTION

Especificaciones del producto

Marca: Datalogic
Categoría: Lector de código de barras
Modelo: Memor 10 Healthcare

¿Necesitas ayuda?

Si necesitas ayuda con Datalogic Memor 10 Healthcare haz una pregunta a continuación y otros usuarios te responderán




Lector de código de barras Datalogic Manuales

Lector de código de barras Manuales

Últimos Lector de código de barras Manuales