Deaf Bonce Machete MT-23 NEO Manual de Usario

Deaf Bonce Vocero Machete MT-23 NEO

Lee a continuación 📖 el manual en español para Deaf Bonce Machete MT-23 NEO (16 páginas) en la categoría Vocero. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
http://deafbonce.com
MACHETE MT-23NEO
HIGH-FREQUENCY SPEAKER
HF SPEAKER
1. Introduction
2. Safety instructions
3. Wiring diagrams
4. Filtering, recommended amplifier settings
5. Specifications
6. Dimensions
7. Box contents
8. Warranty and maintenance info
9. Information on disposal of the electrical and electronic equipment
(for the European countries with separate waste collection)
2
C O N T E N T S EN
1 . I N TRO D UCT I O N
Thank you for purchasing this Deaf Bonce product! Deaf Bonce is committed to the creation of extremely high-profile
systems with no loss of quality.
To ensure proper use, please read through this manual before using this product. It is especially important that you carefully
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
1. Fasten the audio system properly when installing it in the vehicle. If the component is disconnected during driving, it may
cause serious damage to the passengers of the vehicle or another vehicle.
2. Before installing the components, if possible store the product in the original package to avoid accidental damage to the
product.
3. Be careful when installing and dismantling the audio systems! Do not let the speaker drop to avoid damage of its moving
parts.
4. When working with tools follow safety rules.
5. Before the installation switch off the head unit and all other audio devices to avoid their damage.
6. Make sure that the location of the audio system does not hinder the proper operation of mechanical and electrical devices
of the vehicle.
7. Do not install components in places exposed to water, excessive humidity, high or low temperature, dust or dirt.
ATTENTION!!! The product may be operated at +5 to +40 °C. In case of moisture condensation, let the product to dry.
8. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe or
other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
9. When stretching back the speaker cables make sure that they are not in contact with sharp edges or moving mechanical
devices. Make sure that they are firmly fixed and protected over the entire length.
10. The diameter of the speaker cables must be selected in accordance with the length and applied power.
11. Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
12. To protect the cables use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
2 . S A F ETY I NS TR U CTI O N S
3 . W I RIN G D I A G R AMS
4 Ohm х 2 HF 8 Ohm
Voice coil Total impedance
S er i al c o nn e c ti o n of t h e sp e ak e r s
3
EN
Do not expose your amplifier to loads below the value predetermined by the manufacturer.
Various examples of connection types are given at the pages below. Use these examples to determine the required load
impedance of your connection.

Especificaciones del producto

Marca: Deaf Bonce
Categoría: Vocero
Modelo: Machete MT-23 NEO

¿Necesitas ayuda?

Si necesitas ayuda con Deaf Bonce Machete MT-23 NEO haz una pregunta a continuación y otros usuarios te responderán




Vocero Deaf Bonce Manuales

Vocero Manuales

Últimos Vocero Manuales