Defy DSS694 Manual de Usario

Defy horno DSS694

Lee a continuación 📖 el manual en español para Defy DSS694 (16 páginas) en la categoría horno. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
KITCHENAIRE
SOLID PLATES STOVE
DSS693 & DSS694
Cooking
Instruction manual
Part number: 073234D
PAGE OF16 2
Dear Customer,
Your new Defy oven was manufactured in a state of the art facility and has passed the strictest
quality control procedures.
Please read this manual carefully before using your oven for the first time and then store it
within easy reach for future reference.
This manual will provide you with information on how to operate and care for your oven to gain
the maximum benefit from it.
We trust you will enjoy years of trouble free use.
EXPLANATION OF SYMBOLS
Important information
Warning—Hazardous situations
Warning—Electric shock
Caution; Warning for fire hazard
Caution; Warning for hot surfaces
Contents
PLEASE REGISTER YOUR PRODUCT AT
www.defy.co.za
DEFY APPLIANCES (PTY) LTD
P.O.BOX 12004
JACOBS
DURBAN
4026
SOUTH AFRICA
1. General Information 3
Introduction 3
Unpacking 3
Installation 3
Anti-tilt Mechanism 4
2. Important Safety Instruction 5
Safety advice 5
General Safety 5
3. How to use the oven 7
The control panel 7
Tips for baking 7
Tips Grilling 7
Selector switch 7
How to operate the electric oven 8
How to operate the grill 9
4. Maintenance and care 11
General cleaning 11
Cleaning the oven 11
Steam assisted cleaning 11
Removing the Oven light 11
Removing the oven door 12
5. Trouble Shooting 13
6. Branches 15
7. Warranty 16
PAGE OF16 3
Connecting the sprague to the oven
1.) Purchase a standard plastic/metal saddle
type bracket, capable of going around the
20 mm diameter sprague and with a hole
pitch of 38 mm (Plastic) 45 mm (Metal),
from your local hardware and 2 off 4.2
mm x 12 mm self tapping screws.
2.) Feed the cables through the Sprague and
connect to the mains terminal block of the
appliance.
3.) Place the plastic/metal saddle around the
sprague and fasten via the 2 self tapping
screws onto the factory pre punched
holes adjacent to the mains terminal block
of the appliance.
1
2
3
WARNING! ELECTRICAL
CONNECTION MUST ONLY BE
DONE BY A QUALIFIED
ELECTRICIAN!
Introduction
Congratulations on the purchase of this
quality product.
We trust that you will enjoy many years of
trouble free use. Please read these
instructions carefully before using the stove.
This manual will provide you with
information on how to operate and care for
your product in order that you gain the
maximum benefit from it.
Unpacking
• Please ensure that packaging material is
disposed of in a responsible manner.
• Plastic bags should be cut up to prevent
children playing with them and
accidentally suffocating.
• Remove all packing from the oven cavity
and position the accessories.
• If the appliance is damaged in any way,
do not use it. Report the damage to your
dealer, who will take the necessary
corrective action.
Installation
• Levelling feet are provided to assist you
in positioning your stove, so that it will
stand firm and level. To adjust the level,
turn the relevant foot to either raise or
lower the stove.
• Surfaces immediately adjacent to the
oven should be able to withstand
temperatures of up to 100°C without
delaminating or discolouring.
Electrical installation
This appliance must be earthed and the
manufacturer and the seller do not accept
responsibility for any damage due to
incorrect installation or electrical connection.
This appliance should not be connected
through an earth leakage system. Refer to
S.A.N.S. 10142
Connection to the power supply
This appliance has a ‘Y’ type supply cord
connection and must be installed by a
licensed electrician, who will ensure that the
stove is correctly connected and safely
earthed. The rated current is printed on the
serial number label attached to the stove
upper back panel. The appliance must be
connected to the mains through an All pole
isolating switch which has a minimum
clearance between the contacts of 3 mm in
All poles. A means for disconnection must
be provided in the fixed wiring.
1. General information

Especificaciones del producto

Marca: Defy
Categoría: horno
Modelo: DSS694

¿Necesitas ayuda?

Si necesitas ayuda con Defy DSS694 haz una pregunta a continuación y otros usuarios te responderán


horno Defy Manuales

Defy

Defy DBO499 Manual de Usario

24 Septiembre 2024
Defy

Defy DHG134 Manual de Usario

6 Septiembre 2024
Defy

Defy DBO472 Manual de Usario

6 Septiembre 2024
Defy

Defy DHD494 Manual de Usario

6 Septiembre 2024
Defy

Defy DBO475 Manual de Usario

6 Septiembre 2024
Defy

Defy DHD394 Manual de Usario

6 Septiembre 2024
Defy

Defy DSS434 Manual de Usario

6 Septiembre 2024
Defy

Defy DSS515 Manual de Usario

6 Septiembre 2024
Defy

Defy DHG931 Manual de Usario

6 Septiembre 2024
Defy

Defy DHG133 Manual de Usario

6 Septiembre 2024

horno Manuales

Últimos horno Manuales

Continental Edison

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024
Taurus

Taurus HM778WHD Manual de Usario

27 Octubre 2024
Lacanche

Lacanche CITEAUX Manual de Usario

27 Octubre 2024
JennAir

JennAir JDS1450FS Manual de Usario

27 Octubre 2024
Orima

Orima ORP-76-IN Manual de Usario

27 Octubre 2024
Breville

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024
JennAir

JennAir JGRP436HL Manual de Usario

27 Octubre 2024
Neff

Neff C17MS22G1 Manual de Usario

27 Octubre 2024
Pit Boss

Pit Boss BK24 Manual de Usario

27 Octubre 2024
Guzzanti

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024