DeWalt DC827KL Manual de Usario

DeWalt maquina de atornillar DC827KL

Lee a continuación 📖 el manual en español para DeWalt DC827KL (56 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/56
DC820, DC822, DC830, DC840 1/2" (13 mm) Cordless Impact Wrench
DC825, DC827, DC835, DC845, DC855, DCF826 1/4" (6.35 mm) Cordless Impact Driver
DC823, DC833, DC841 3/8" (9.5 mm) Cordless Impact Wrench / DC821, DW059, DW059H 18 V 1/2" (13 mm) Cordless Impact Wrench
Clé à chocs sans fil DC820, DC822, DC830, DC840 13 mm (1/2 po) / Mandrin à chocs sans fil DC825, DC827, DC835, DC845, DC855, DCF826
6,35 mm (1/4 po) / Clé à chocs sans fil DC841 9,5 mm (3/8 po) / Clé à chocs mm (1/2 po)DC823, DC833, sans fil DC821, DW059, DW059H 18 V 13
Llave de impacto inalámbrica DC820, DC822, DC830, DC840 de 13 mm (1/2") / Destornillador de impacto inalámbrico DC825, DC827,
DC835, DC845, DC855, DCF826 de 6,35 mm (1/4") / Llave de impacto inalámbrica DC823, DC833, DC841 de 9,5 mm (3/8") /
Llave de impacto inalámbrica DC821, DW059, DW059H de 18 V y 13 mm (1/2")
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation which,
if not avoided, result in may minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable,
use a ground fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electric shock.
English
1

Especificaciones del producto

Marca: DeWalt
Categoría: maquina de atornillar
Modelo: DC827KL

¿Necesitas ayuda?

Si necesitas ayuda con DeWalt DC827KL haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar DeWalt Manuales

DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW130VK Manual de Usario

3 Octubre 2024
DeWalt

DeWalt DWD220 Manual de Usario

19 Septiembre 2024
DeWalt

DeWalt DW256 Manual de Usario

17 Septiembre 2024
DeWalt

DeWalt DC800 Manual de Usario

17 Septiembre 2024
DeWalt

DeWalt DCF630 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DW284 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DW281 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DW267 Manual de Usario

16 Septiembre 2024
DeWalt

DeWalt DCF913 Manual de Usario

16 Septiembre 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
Makita

Makita 6906J Manual de Usario

5 Octubre 2024