DeWalt DW059HK-2 Manual de Usario

DeWalt maquina de atornillar DW059HK-2

Lee a continuación 📖 el manual en español para DeWalt DW059HK-2 (56 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/56

DC820, DC822, DC830, DC840 1/2" (13 mm) Cordless Impact Wrench

DC825, DC827, DC835, DC845, DC855, DCF826 1/4" (6.35 mm) Cordless Impact Driver

DC823, DC833, DC841 3/8" (9.5 mm) Cordless Impact Wrench / DC821, DW059, DW059H 18 V 1/2" (13 mm) Cordless Impact Wrench

Clé à chocs sans fil DC820, DC822, DC830, DC840 13 mm (1/2 po) / Mandrin à chocs sans fil DC825, DC827, DC835, DC845, DC855, DCF826

6,35 mm (1/4 po) / Clé à chocs sans fil DC841 9,5 mm (3/8 po) / Clé à chocs mm (1/2 po)DC823, DC833, sans fil DC821, DW059, DW059H 18 V 13

Llave de impacto inalámbrica DC820, DC822, DC830, DC840 de 13 mm (1/2") / Destornillador de impacto inalámbrico DC825, DC827,

DC835, DC845, DC855, DCF826 de 6,35 mm (1/4") / Llave de impacto inalámbrica DC823, DC833, DC841 de 9,5 mm (3/8") /

Llave de impacto inalámbrica DC821, DW059, DW059H de 18 V y 13 mm (1/2")

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE

USAR EL PRODUCTO.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-D WALT • www.dewalt.comE

Deﬁ nitions: Safety Guidelines

The definitions below describe the level of severity for each

signal word. Please read the manual and pay attention to these

symbols.

DANGER: Indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation

which, if not avoided, result in could death or serious injury.

CAUTION: Indicates a potentially hazardous situation which,

if not avoided, result in may minor or moderate injury.

NOTICE: Indicates a practice not related to personal injury

which, if not avoided, result in may property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT

(1-800-433-9258).

WARNING: To reduce the risk of injury, read the instruction

manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust. Power tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric

shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable,

use a ground fault circuit interrupter (GFCI) protected

supply. Use of a GFCI reduces the risk of electric shock.

English

Especificaciones del producto

Marca:	DeWalt
Categoría:	maquina de atornillar
Modelo:	DW059HK-2
Color del producto:	Zwart
Ancho:	438 mm
Profundidad:	780 mm
Altura:	43.5 mm
Ancho del embalaje:	985 mm
Empaquetadura en profundidad:	588 mm
Altura del embalaje:	250 mm
Indicadores LED:	Ja
Interruptor encendido / apagado:	Ja
red LAN:	Ja
Puerto(s) VGA (D-Sub):	1
Número de puertos Ethernet LAN (RJ-45):	2
Suministro de red:	1300 W
Tipo de procesador:	Nee
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Temperatura de almacenamiento:	-40 - 60 °C
numero de fans:	8 ventilator(en)
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	3
Zócalo del procesador:	LGA 4189
Modelo de adaptador de gráficos integrado:	Aspeed AST2500
Humedad de almacenamiento:	20 - 95 procent
Botón de reinicio:	Ja
Tipo de vivienda:	Rack (1U)
Certificación 80 PLUS:	80 PLUS Platinum
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel C621A
Número de bahías de 2,5":	10
Canal de memoria:	Achtkanaals
Controlador LAN:	Intel® I350-AM2
Número de procesadores admitidos:	2
Número de ranuras DIMM:	32
Admite velocidades de reloj RDIMM:	2666,2933,3200 MHz
Número de unidades de almacenamiento admitidas:	10
Tamaños de unidades de almacenamiento admitidos:	2.5 "
Tipos de memoria soportados:	DDR4-SDRAM
Bahías HDD de intercambio en caliente:	Ja
Temperatura de funcionamiento (TT):	10 - 35 °C
Humedad relativa de funcionamiento (VV):	8 - 80 procent
Número de fuentes de alimentación redundantes instaladas:	2
Código del Sistema Armonizado (SA):	84714100
Diámetro del ventilador:	40 mm
Placas posteriores compatibles:	Ja