DeWalt DW124K Manual de Usario

Lee a continuación 📖 el manual en español para DeWalt DW124K (26 páginas) en la categoría Boormachine. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/26
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (NOV02-CD-2) Form No. 384086-01
DW124 Copyright © 2002
The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of
pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
DW124/384086-01 11/15/02 12:35 PM Page 2
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW124
1/2"(13mm) Joist and Stud Drill
Perceuse pour charpente de 13 mm (1/2 po)
Taladro para vigas verticales y horizontales de 13 mm (1/2")
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
Questions? See us on the World Wide Web at www.dewalt.com
DW124/384086-01 11/15/02 12:35 PM Page 3
Important Safety Instructions
WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRUCTIONS
Grounding Instructions
This tool should be grounded while in use to protect the operator from
electric shock. The tool is equipped with a 3-conductor cord and 3-
prong grounding type plug to fit the proper grounding type receptacle.
The green (or green and yellow) conductor in the cord is the
grounding wire. Never connect the green (or green and yellow) wire
to a live terminal. If your unit is intended for use on less than 150 V, it
has a plug that looks like that shown in sketch A. If it is for use on
150 to 250 V, it has a plug that looks like that shown in sketch D. An
adapter, sketches B and C, is available for connecting sketch A type
plugs to 2-prong receptacles. The green-colored rigid ear, lug, or the
like, extending from the adapter must be connected to a permanent
ground, such as a properly grounded outlet box. No adapter is
available for a plug as shown in sketch D. ADAPTER SHOWN IN
FIGURES B and C IS NOT FOR USE IN CANADA.
English
WARNING
AVERTISSEMENT:
• FOR SAFE OPERATION, READ
INSTRUCTION MANUAL.
• ALWAYS WEAR EYE PROTECTION.
• DO NOT EXPOSE TO RAIN OR USE
IN DAMP LOCATIONS.
NE PAS EXPOSER A LA PLUIE ET NE
PAS UTILISER DANS L ES
EMPLACEMENTS HUMIDES.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
BAIL HANDLE
1/2"
CHUCK
SIDE HANDLE TRIGGER
SWITCH
REVERSING
SWITCH
A B C D
GROUNDING PIN
GROUNDED
OUTLET
BOX GROUNDING
MEANS
GROUNDING PIN
ADAPTER
DW124/384086-01 11/15/02 12:35 PM Page 4

Especificaciones del producto

Marca: DeWalt
Categoría: Boormachine
Modelo: DW124K

¿Necesitas ayuda?

Si necesitas ayuda con DeWalt DW124K haz una pregunta a continuación y otros usuarios te responderán




Boormachine DeWalt Manuales

Boormachine Manuales

Últimos Boormachine Manuales