Digitus DC-11403 Manual de Usario

Digitus No categorizado DC-11403

Lee a continuación 📖 el manual en español para Digitus DC-11403 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

USB-KVM

SWITCH

DC-11403

DC-12402

USER MANUAL REV. 1-0

Package Contents –

 DIGITUS DC-11403 or DC-12402 KVM Switch

 1 User Manual

Please contact your vendor if anything is missed.

Features

 Controls PCs with one USB keyboard, USB mouse and monitor

respectively

 Supports USB 1.1 specification

 Supports speaker & microphone

 Supports Windows, Linux and Macintosh

 Superior video quality - Up to 1920 x 1440 pixel, DDC, DDC2,

DDC2B, DDC2AB, 200MHz

 3 ways for PC selection -- Push-button switch or hot key or

mouse clicking

 Easy to install--No software required

 Hot Pluggable

Specifications

Function DC-11403 DC-12402

PC Connectors 2 4

Port Selection Push-button Switch / Hot Key

/ Mouse Clicking

LEDs On Line 2 4

Selected 2 4

Connector

-Keyboard,

Mouse

Console Port 2x USB A-Type

CPU Port 2x USB B-Type 4x USB B-Type

Connector

-Monitor

Console Port 1x HD-15 Female (Std. VGA/SVGA)

CPU Port 2x HD-15 Male

(Std. VGA/SVGA)

4x HD-15 Male

(Std. VGA/SVGA)

Connector

-Audio,Mic.

(Jack)

Console Port 1 x Audio, Microphone

CPU Port 2 x Audio, Mic. 4 x Audio, Mic.

VGA Resolution Max. 1920x1440 pixel, DDC, DDC2,

DDC2B, DDC2AB, 200MHz

Power Adapter DC 9V 300mA (Min.) spare

Scan Interval 5 sec ~ 30 sec

Housing Metal

Weight 460 g 650 g

Dimensions (LxWxH) 128x75x45 mm 200x75X45 mm

Hardware Requirements

Required specifications

Console

One high resolution VGA, SVGA or Multisync monitor

One USB mouse

One USB keyboard

One pair of speakers.

One microphone.

One VGA, SVGA or Multisync card

One USB port

One audio jack port.

One microphone port.

Cable Assmann AK 8210x and AK 8230x or similar

-1-

Appearance

Front View

1. Push-button Switches (Manual type)

2. Port LEDs

3. Console Keyboard and Mouse Connectors

Rear View

1. Console Monitor, Speaker and Microphone

Connectors

2. CPU Port Connectors

Installation

Before the installation, make sure the peripherals of all

PCs are grounded properly and turned off.

1. Connect the monitor, keyboard and mouse with the

Console Port Connectors.

2. Use the recommended extension cables to connect

the PCs with the CPU Ports of KVM Switch.

3. Turn on the PCs.

-2-

Operation

1. The function of LED display:

LED DISPLAY DESCRIPTION

Light off PC power off

Green light on PC power on and connected

Green light on & Red light

flashing

PC power on, connected and

selected

Note: It occurs occasionally that the green light of LED display is

on and the red light of LED display keeps flashing after

shutting down the PC because of the PC default. The

condition will not affect the regular operation of KVM

switch.

2. 3 ways for PC selection – Push-button switch, hot key or

mouse clicking

2.1 Push-button switch (Manual Type)

Press the button on front panel to switch the CPU ports.

The red light of LED indicates which PC is selected.

2-2 Mouse clicking

Item Operation Function

DC-11403 [Middle button] + [Left Button] or

[Middle button] + [Right Button]

Access between

two PCs.

DC-12402 [Middle button] + [Left Button] Switch to the

previous PC.

DC-12402 [Middle button] + [Right Button] Switch to the next

PC.

Note: 2-Key Mouse is NOT applicable.

2-3 Hot Key option

Hot Key Navigation allows you to select PC from the

keyboard directly.

Options for Hot Key Navigation:

 Select PC by Hot Key

 Command mode

 Auto scan mode

 Beep sound on/off option: Press [Right Shift] key twice

to turn on or off the beep sound when needed.

 Select PC by Hot Key:

Press either left or right [Ctrl] key twice.

Item Hot Key Operation Function

DC-11403 [L Ctrl] + [L Ctrl] or

[R Ctrl] + [R Ctrl] Access between two PCs.

DC-12402 [L Ctrl] + [L Ctrl] Switch to the previous PC.

DC-12402 [R Ctrl] + [R Ctrl] Switch to the next PC.

 Command Mode:

Press [Num Lock] key twice, and the 3 keys [Num Lock],

[Caps Lock] and [Scroll Lock] will flash to access the

Command Mode.

a). Directly press the function key [F1] ~ [F2] for DC-11403

or [F1] ~ [F4] for DC-12402 to select PC.

-3-

b). Press [Left Ctrl] key to disable [Ctrl] and [Shift] hot

key function.

c). Press [Right Ctrl] key to enable [Ctrl] and [Shift] hot

key function.

d). Press [Left Shift] key to turn off the beep sound.

e). Press [Right Shift] key to turn on the beep sound.

f). Press [Left Win] key or mouse [Middle button] + [Left

Button] to disable Mouse clicking function.

g). Press [Right Win] key or mouse [Middle button] + [Right

Button] to enable Mouse clicking function.

h). Press [Left Alt] key to disable Auto skip function.

i). Press [Right Alt] key to enable Auto skip function.

j). Press [Esc] or [Enter] key to quit the mode.

Note:

[Ctrl] Hot Key function – Selecting PC ports.

[Shift] Hot Key function – Beep sound on/off.

 Auto Scan Mode:

Press [Scroll Lock] key twice to activate the Auto Scan Mode.

The time scale of Auto Scan ranges from 5 to 30 seconds,

and it can be recognized by the lights of the 3 keys [Num

Lock], [Caps Lock] and [Scroll Lock] as the timetable below.

a). Press the right number key [+] to increase time scale.

b). Press the right number key [-] to decrease time scale.

c). Press [Esc] key to quit the mode.

Note: Light(s) corresponding timetable

Seconds Num Lock Caps Lock Scroll Lock

5 seconds Off Off On

10 seconds On Off Off

15 seconds On Off On

20 seconds Off On Off

25 seconds Off On On

30 seconds On On Off

3. The boot-up default of DIGITUS KVM Switch is connected

to your first activated PC.

4. When the PC is shut down under the function of “Auto

skips over the power-off PC”, it cannot be turned on again

by keyboard.

Troubleshooting

Make sure the cables are qualified and positioned.

Q1 : The keyboard does not respond accurately.

A1a:

Re-install the keyboard. Unplug the keyboard from the

Console Port and plug it back again.

A1b:

Re-install the DIGITUS KVM Switch. Shut down the

PCs, unplug the cables from the DIGITUS KVM

Switch and wait for five seconds. Then plug the cables

back and activate the PCs.

A1c: When under Auto Scan Mode, please press [Esc] key

to escape.

-4-

A1d: PCs can’t supply the power to DIGITUS KVM Switch.

Please attach a power adapter of DC9V 300mA with

positive central polarity.

A1e: Try another keyboard.

Q2 : The mouse does not respond accurately.

A2a: Re-install the mouse. Unplug the mouse from the

Console Port and plug it back again.

A2b: Re-install the DIGITUS KVM Switch. Shut down the

PCs, unplug the cables from the DIGITUS KVM

Switch, and wait for five seconds. Then plug the

cables back and activate the PCs.

A2c: PCs can’t supply the power to DIGITUS KVM Switch.

Please attach a power adapter of DC9V 300mA with

positive central polarity.

A2d: Try another mouse.

Q3: The mouse is out of control.

A3: The characteristic of the mouse is inefficient. Try

another superior mouse and plug it back again. Start

the operation after hearing the beep sound.

Q4: There is the video problem.

A4a: The setting of resolution or bandwidth is over high.

DIGITUS KVM Switch supports the VGA, SVGA,

Multisync and XGA (interlaced) with the resolution up

to 1920 x 1440 Hz. The maximum bandwidth is 200

MHz.

A4b: The cable is unqualified. Please use the superior

cables of Assmann cables series.

Q5:

A5:

Why the green light of LED display is on and red

light keeps flashing after shutting down the PC?

The condition is normal and caused from the PC

default. The condition will not affect the regular

operation of DIGITUS KVM switch.

Trademarks:

All the companies, brand names, and product names

referred to this manual are the trademarks or

registered trademarks belonging to their respective

companies.

Especificaciones del producto

Marca:	Digitus
Categoría:	No categorizado
Modelo:	DC-11403

¿Necesitas ayuda?

Si necesitas ayuda con Digitus DC-11403 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Digitus Manuales

Digitus DA-71120-1 Manual de Usario

25 Octubre 2024

Digitus DS-55345 Manual de Usario

27 Septiembre 2024

Digitus DN-19 22U-8/8-1 Manual de Usario

18 Septiembre 2024

Digitus DA-71158 Manual de Usario

18 Septiembre 2024

Digitus DA-71154 Manual de Usario

18 Septiembre 2024

Digitus DA-71156 Manual de Usario

18 Septiembre 2024

Digitus DA-71559 Manual de Usario

18 Septiembre 2024

Digitus DA-71157 Manual de Usario

18 Septiembre 2024

Digitus DA-71111 Manual de Usario

18 Septiembre 2024

Digitus DA-70431 Manual de Usario

18 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024