Doepfer A-150 Manual de Usario

Lee a continuación 📖 el manual en español para Doepfer A-150 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
doepfer System A - 100 Dual VCS A-150
1
1. Introduction
Module A-150 (Dual VCS) contains two separate
voltage-controlled switches.
Each switch has a control voltage input, a common
Out / Input, and two In / Outputs. The switches are
bi-directional: they can work in both directions, so
can connect one input to either of two outputs, or
either of two inputs to one output. Voltages in the
range -8V...+8V at the O/I resp. I/O sockets can be
processed by the module.
Two LEDs show which in / output is active (ie. which
is connected to the common out / input).
From about March 2004 a new version of the A-150 is
available. This allows the full A-100 voltage range
-12V...+12V for the voltages at the O/I resp. I/O soc-
kets. The new version can be identified at the pc
board label "A-100 SYSTEM A-150 DUAL VC
SWITCH VERSION 2 " near the bus connector at the
pc board edge.
CV
O/I
A-150
CV
I/O 1
O/I
I/O 2
I/O 1
I/O 2
DUAL VCS
A-150 Dual VCS System A - 100 doepfer
2
2. Overview Indicators:
1 LED: indicator for in / output "
2 LED: indicator for in / output §
In / Outputs:
! CV : input for digital control voltage
" I/O 1 : in / output 1
§ I/O 2 : in / output 2
$ O/I : common out / input
A-150
CV
I/O 1
I/O 2
O/I
CV
I/O 1
I/O 2
O/I
DUAL VCS
doepfer System A - 100 Dual VCS A-150
3
3. Indicators
1 LED ... 2 LED
LEDs 1 and 2 serve as status indicators, to show
which of the two in / outputs " and § is at that moment
connected to the common out / input $.
4. In / Outputs
! CV
Socket ! is the input for the digital control voltage,
whose level determines the switch state (see Fig. 1):
CV low ( < ~3.6 V): O/I ---- I/O 1
CV high ( > ~3.6 V): O/I ---- I/O 2
If a high frequency control voltage is used for swit-
ching, audio frequency modulation results (see Fig. 4
on page 5).
Fig. 1: The A-150’s switching behaviour
" I/O 1 • § I/O 2
These sockets are the in / outputs.
$ O/I
Socket $ is the common out / input. Depending on
the level of control voltage at input ! it’s connected to
socket " or § (see Fig.1).
CV
~ 3.6 V
O/I
I/O 1
I/O 2 O/I
I/O 1
I/O 2 O/I
I/O 1
I/O 2

Especificaciones del producto

Marca: Doepfer
Categoría: No categorizado
Modelo: A-150

¿Necesitas ayuda?

Si necesitas ayuda con Doepfer A-150 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Doepfer Manuales

No categorizado Manuales

Últimos No categorizado Manuales