Dometic MasterFlush MF 7260 Manual de Usario

Dometic Toilet MasterFlush MF 7260

Lee a continuación 📖 el manual en español para Dometic MasterFlush MF 7260 (2 páginas) en la categoría Toilet. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

SEACOCK

0.75 in./19 mm

ID HOSE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

SEACOCK

MACERATOR

TOILET

MAKE LOOP 12 in./30 cm ABOVE FLOOR TO

RETAIN WATER IN BOWL

FROM

FRESH

WATER

SUPPLY

5.1 Above water line system layouts

SPECIAL APPENDIX - SUPERCEDES TOILET SYSTEM LAYOUTS IN

SECTION 5 OF INSTALLATION MANUAL

(FRESHWATER

SUPPLY)

CHECK VALVE

ENSURES

THAT PUMP

STAYS PRIMED

0.5 in./

13 mm ID

FRESH

WATER

LINE

5Toilet with direct overboard

discharge

SEACOCK

DECK

DISCHARGE

HOLDING TANK

(cut-away view)

DISCHARGE

PUMP

OPTIONAL

FULL TANK

LEVEL FLOAT

ADD VENTED LOOP

IF HOLDING TANK IS

BELOW WATER LINE

VENT

FILTER

VENT

FITTING

0.75 in./19 mm

ID HOSE

(SEAWATER

SUPPLY)

SEACOCK

MACERATOR

TOILET

MAKE LOOP 12 in./30 cm ABOVE FLOOR TO

RETAIN WATER IN BOWL

FROM

FRESH

WATER

SUPPLY

(FRESHWATER

SUPPLY)

CHECK VALVE

ENSURES

THAT PUMP

STAYS PRIMED

0.5 in./

13 mm ID

FRESH

WATER

LINE

6Toilet with holding tank

discharge

IMPORTANT:

1. TOILET BOWL RIM MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL.

2. VENTED LOOPS MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL. FOR OPTIMUM TOILET OPERATION, INSTALL

VENTED LOOP AS CLOSE TO 8” (20 cm) HEIGHT AS

POSSIBLE.

3. PLACE VENTED LOOPS NEAR CENTER OF BOAT TO

MINIMIZE FLUCTUATION OF WATER LINE HEIGHT.

4. MAXIMUM SEAWATER PUMP LIFT IS 4 FT. (1.2 m).

5. MAXIMUM DISCHARGE HEAD IS 4 FT. (1.2 m).

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

8 in./20 cm MINIMUM

(MAX HEEL)

WATERLINE RANGE

(STATIC)

5.2 Below water line system layouts

Toilet with direct overboard

discharge

Toilet with holding tank

discharge

0.75 in./19 mm

ID HOSE

MACERATOR

TOILET

0.75 in./19 mm

VENTED LOOP

WITH CHECK

VALVE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

VENTED LOOP

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

SEACOCK

VENT

FITTING

VENT

FITTING

(FRESHWATER

SUPPLY)

SEACOCK

0.5 in./13 mm ID

FRESH WATER

LINE

0.5 in./13 mm ID

FRESH WATER

LINE

8 in./20 cm MINIMUM

(MAX HEEL)

WATERLINE RANGE

(STATIC)

0.75 in./19 mm

ID HOSE

MACERATOR

TOILET

0.75 in./19 mm

VENTED LOOP

WITH CHECK

VALVE

(SEAWATER

SUPPLY)

1 in./25 mm OR

1.5 in./38 mm

ID HOSE

VENT

FITTING

VENT

FITTING

SEACOCK

(FRESHWATER

SUPPLY)

DECK

DISCHARGE

HOLDING TANK

(cut-away view)

DISCHARGE

PUMP

OPTIONAL

FULL TANK

LEVEL FLOAT

ADD VENTED LOOP

IF HOLDING TANK IS

BELOW WATERLINE

VENT

FILTER

VENT

FITTING

SEACOCK

IMPORTANT:

1. 0.75” VENTED LOOP MUST USE EIT HER A DUCKBILL

VALVE OR ELECTRIC NORMALLY-OPEN SOLENOID

VALVE.

2. VENTED LOOPS MUST BE MINIMUM 8” (20 cm)

ABOVE HIGHEST POSSIBLE WATER LINE AT FULL

HEEL. FOR OPTIMUM TOILET OPERATION, INSTALL

VENTED LOOP AS CLOSE TO 8” (20 cm) HEIGHT AS

POSSIBLE.

3. VENTED LOOPS SHOULD NOT EXCEED MAXIMUM

24” (50 cm) ABOVE WATER LINE.

4. PLACE VENTED LOOPS NEAR CENTER OF BOAT TO

MINIMIZE FLUCTUATION OF WATER LINE HEIGHT.

5. MAXIMUM SEAWATER PUMP LIFT IS 4 FT. (1.2 m).

6. MAXIMUM DISCHARGE HEAD IS 4 FT. (1.2 m).

REVISION A

Form No. 600347192 9/17

Especificaciones del producto

Marca:	Dometic
Categoría:	Toilet
Modelo:	MasterFlush MF 7260
Peso.:	2700 g
Resolución:	1600 x 1200 Pixels
Frecuencia del procesador:	0.366 GHz
Certificación:	EKI-ITB 2000, ISO 9241-3/-8\ncULus 60950, TÜV-GS, EN 60950\nFCC Class B, CE, VCCI, C-Tick\nWEEE, RoHS
Memoria interna:	0.0625 GB
Conexiones:	1x VGA\n1x RS-232 \n4x USB 2.0\n1x RJ-45
Funciones de red:	Ethernet, Fast Ethernet
Dimensiones (Ancho x Fondo x Alto):	177 x 121 x 34 mm
Gestión de energía:	100-240 VAC, 50/60 Hz
Temperatura de funcionamiento (TT):	10 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 80 procent