Dormakaba 9600 Manual de Usario

Dormakaba No categorizado 9600

Lee a continuación 📖 el manual en español para Dormakaba 9600 (22 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/22

I9600-1 4/2010

CONCEALED VERTICAL ROD EXIT DEVICE

9600/F9600 SERIES

INSTALLATION INSTRUCTIONS

1135-231 95057470 www.dorma-usa.com 1-800-523-8483

Index:

Screw chart

Tools required

Outside trim options

"03" Additional door prep

Device installation

Frame & strike preps

Final rod adjustment

Options available

Wood door preparation

5100 retro-t preparation

Metal edge guard

Spotting template

5-10

11-12

14-16

Note: One set of instructions should be left

with building owner after device has been

installed.

SCREW CHART

(2) #12 x 1 1/4" F.H.P.T.S. (Wood door)

(2) 12-24 x 1 1/2" F.H.P.M.S. (Metal or thru bolts)

(2) #12 x 1 1/4" R.H.P.T.S. (Wood door)

(2) 12-24 x 1" R.H.P.M.S. (Metal or thru Bolts)

(12) 8-32 x 1/4" F.H.P.M.S.

Optional "WD" mounting brackets (4)

(wood, steel and re)

(4) 10-32 x 1/4" F.H.P.M.S. (Aluminum)

(12) #10 x 1" F.H.P.T.S. (Wood door)

(12) 10-32 x 3/8" F.H.P.M.S. (Metal door)

Adjusting screw

(2) 3/32 x 10-32 x 1/2" Allen Head (wrench supplied)

(2) 10-32 x 3/8" F.H.P.M.S.

(6) 8-32 x 1/4" F.H.P.M.S.

Chassis mounting

End cap bracket

Bracket to latch

Bracket to door

Locking screw

#418 Strike pack

Chassis cover

& end cap

Chassis mounting

End cap bracket

Bracket to door

#439 Bottom strike

(cement or grout

in place)

(4) 10-32 x 1/4" F.H.P.M.S. (Aluminum) Bracket to toor

Standard "NS"

latch assembly

(2) Rod retaining clips Rod installation

Optional: "ALD" Mounting Bracket (2)

(Medium Stile Aluminum Doors)

RHR LHR

9600

Series

Device

9600

Series

Device

9700

Series

Device

9600

Series

Device

9600

Series

Device

Read the entire instruction sheet prior to installation.

Before Installing Hardware:

1. Verify door width, handing and product with carton label for correct exit device and length. (See Step 9)

2. For hand reversal of chassis see page 6, for outside lever trim see page (3).

3. For less bottom rod device, delete bottom latch installation steps.

4. Device installation and preliminary adjustments should be made prior to hanging door.

Note: Less bottom rod device is not recommended where security is a primary concern.

Note: If device is to be installed over glass lite panels, shim kit may be required, order GK9200.

12-24 Tap, 10-32 Tap

Drill bits: 1/8", 3/8", #25, #16, #21

Hole saw 1 1/4" diameter for trim (if required) or jig saw.

5/32" Allen wrench for lever trim.

3/32" Allen wrench (supplied)

HANDING OF DOOR

HANDING OF DOORHANDING OF DOOR

TYPICAL APPLICATIONS

TYPICAL APPLICATIONSTYPICAL APPLICATIONS

SPECIAL TOOLS FOR INSTALLATION

SPECIAL TOOLS FOR INSTALLATIONSPECIAL TOOLS FOR INSTALLATION

Especificaciones del producto

Marca:	Dormakaba
Categoría:	No categorizado
Modelo:	9600
Color del producto:	Wit
Capacidad del acumulador/batería:	2200 mAh
Cables suministrados:	Micro-USB
Compatibilidad del cargador:	Mobile phone/Smartphone, Tablet, MP3/MP4, GPS, E-book reader
Número de dispositivos conectados simultáneamente (máx.):	1
Linterna incorporada:	Ja
Tecnología de batería:	Lithium-Ion (Li-Ion)