Dormakaba RCI 4 Manual de Usario

Dormakaba No categorizado RCI 4

Lee a continuación 📖 el manual en español para Dormakaba RCI 4 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

INSTALLATION

RCI 4/7 SERIES

ELECTRIC STRIKES

www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.comIS47A

PCN18041

R03-19TG

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 7/8 .875 22.23

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.688 42.86

R 5/32 .156 3.97

K 4-1/8 4.125 104.78

M 12-24 — —

RCI 7104, 7304 Aluminum Frames, 1-1/2” D

RCI 4104, 4304 Aluminum Frames, 1-1/2” D

Any modular or A41 A43 A71, , A73

with B4704 faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

Vertical Centerline

of Door**

RCI 7105, 7305 Aluminum & Wood Frames, 1-1/2” D

RCI 4105, 4305 Aluminum & Wood Frames, 1-1/2” D

Any modular or A41 A43 A71, , A73

with B4705 faceplate

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/8 1.125 28.58

B 5-7/8 5.875 149.23

C 3-3/8 3.375 85.73

D 7/8 .875 22.23

E 1/4 .250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.687 42.86

R 5/32 .156 3.97

K 5-3/8 5.375 136.53

M 12-24† — —

1. Determine the vertical centerline of the door lock face and

the horizontal centerline of the latch.

IMPORTANT: When determining the horizontal centerline

observe the following:

FOR MORTISE LOCKS: Align the angled ramps of the lip

bracket with the deadlock trigger of the mortise latch.

FOR CYLINDRICAL LOCKS: Align the center of the latch with

the center of the strike opening.**

2. Transfer both the horizontal and vertical centerlines to the

doorframe.**

3. Prepare the doorframe for cutting as per the appropriate

drawing.

4. If required, install “no weld” mounting brackets as per the

instructions on page 3.

5. Attach the strike insert (coil unit or “motor”) to the

lip bracket with the small machine screws provided.

(M4 x 9.5mm)

6. Attach the strike faceplate to the lip bracket with machine

screws (M4 x 9.5mm) provided. (It may be desirable to leave

these screws slightly loose to facilitate insertion into the

doorframe.)

7. Connect the incoming wiring from the power supply to the

terminal screws on the strike insert. RCI door strikes are

not polarity sensitive although be certain to observe proper

polarity if a suppression diode is required for access control

applications.

8. Install the door strike in the doorframe using the screws

provided.

Instructions

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

** Dimension X on the drawing is determined by the vertical centerline of the door. If the latch incorporates a deadlocking pin additional steps will be

necessary to ensure proper operation of the deadlocking pin. Measure the thickness of the deadlocking pin and add this thickness to Dimension X to

relocate the vertical centerline an appropriate distance on the frame.

† For wood frame door installations, substitute #12 wood screws for dimension M.

Vertical Centerline

of Door**

www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: sales_RCI@dormakaba.com

RCI 7107, 7307 Aluminum & Wood Frames, 1-1/2” D

RCI 4107, 4307 Aluminum Frames, 1-1/2” D

Any modular or with faceplateA41 A43 A71, , A73 B4707

RCI 7108, 7308 Aluminum & Wood Frames, 1-1/2” D

RCI 4108, 4308 Aluminum & Wood Frames, 1-1/2” D

Any modular or with faceplateA41 A43 A71, , A73 B4708

RCI 7114, 7314 Hollow Metal Frames, 1-1/2” D

RCI 4114, 4314 Hollow Metal Frames, 1-1/2” D

Any modular or with faceplateA41 A43 A71, , A73 B4714

RCI 7119, 7319 Hollow Metal & Wood Frames, 1-1/2” D

RCI 4119, 4319 Hollow Metal & Wood Frames, 1-1/2” D

Not available in modular program

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-3/8 1.375 34.93

B 9 9.0 228.60

C 3-3/4 3.75 95.25

D 1-1/2 1.50 38.10

E 5/16 .312 7.94

F 1/8* .125* 3.18*

G 1-7/8 1.875 47.63

K 8-3/8 8.375 212.73

M 12-24† — —

Vertical Centerline

of Door**

A 1-1/4 1.250 31.75

B 6-7/8 6.875 174.64

C 3-3/8 3.375 85.73

D 7/8 .875 22.23

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.687 42.86

R 5/32 .156 3.97

K 6-1/8 6.125 155.58

M 12-24† — —

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-1/4 1.250 31.75

B 4-7/8 4.875 123.83

C 3-3/8 3.375 85.73

D 7/8 .875 22.23

E 3/8 .375 9.53

F 1/8* .125* 3.18*

G 1-11/16 1.687 42.86

K 4-1/8 4.125 104.78

M 12-24 — —

Vertical Centerline

of Door**

Vertical Centerline

of Door**

MEASUREMENT

FRACTIONAL

INCHES

DECIMAL

INCHES

METRIC

A 1-7/16 1.438 36.51

B 7-15/16 7.938 201.61

C 3-3/8 3.375 85.73

D 7/8 .875 22.23

E 1/4 .250 6.35

F 1/8* .125* 3.18*

G 1-11/16 1.687 42.86

R 5/32 .156 3.97

K 7-7/16 7.438 188.91

M 12-24† — —

Vertical Centerline

of Door**

NOTE: Specifications subject to change without notice.

* Dimension F is measured from face of mounting tab to face of frame.

** Dimension X on the drawing is determined by the vertical centerline of the door. If the latch incorporates a deadlocking pin additional steps will be

necessary to ensure proper operation of the deadlocking pin. Measure the thickness of the deadlocking pin and add this thickness to Dimension X to

relocate the vertical centerline an appropriate distance on the frame.

† For wood frame door installations, substitute #12 wood screws for dimension M.

When installing an electric strike on an inactive door of a set of double doors, it can be treated the same as a frame installation in most situations.

For more information contact the Technical Service Department.