Doro AUB 200 Manual de Usario

Doro telefono AUB 200

Lee a continuación 📖 el manual en español para Doro AUB 200 (8 páginas) en la categoría telefono. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
doro AUB 200
1 Wall mounting hanger hook
2 Headset socket
3 Handset socket
4 Store/Mute button and LED
5 Recall button
6 Memory button
7 Redial button
8 Pause button
9 Headset button and LED
10 Hold button and LED
11 Handset/Headset volume control
12 One-Touch memories
13 Ring/Message Wait Indicator
14 Input socket for additional
equipment
English (see page EN 1-8)
!"# $%&
*+, -./'()
456 789:0123
2
6
9
5
4
1
11
14
8
7
13
3
10
12
English
1
Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should
be taken when placing the handset near these items.
Connection
1. Connect the curly cord to the handset and the socket marked Q. Then connect the
telephone cord to the socket marked on the telephone and then to the telephone t
network socket.
2. Lift the handset and listen for the dial tone. Your telephone is now operational.
Hearing Aid compatible
This telephone is hearing aid compatible. Select T mode on the hearing aid to enable
coupling.
Connection of headset
An additional headset can be connected to the socket on the side of the telephone
marked =.
To access an incoming call or dial press =, to terminate a call press = again.
The LED next to the headset button will illuminate when activated.
Please note!
DORO original headsets are tested and adapted for this telephone. Other types and makes of headsets
may be used, though the function and sound quality can not be guaranteed.
Any damage occurring due to incompatible or non Doro headsets being installed, will not be covered
under the telephone guarantee.
Connection of additional equipment
On the right side of the telephone there is a socket marked . This is used for 8
connecting additional telephone equipment to the same telephone line, e.g. a wireless
telephone, modem, etc.
Labels/protective cover
The memory index cover can be accessed by carefully removing the transparent plastic
using a small at blade screwdriver or similar.
Wall mounting
The telephone can be wall mounted using an optional wall mount bracket.
The wall mount bracket is available as an accessory, part number WB200/300 in white
or black.
1. Fix the wall mount bracket on the back of the telephone.
2. Secure two screws, vertically positioned 83 mm apart.
3. The screws should locate into the two keyholes on the wall mount bracket.
4. Activate the hanging peg (located by the hook switch) by lifting it upwards and
rotating it 180 degrees.

Especificaciones del producto

Marca: Doro
Categoría: telefono
Modelo: AUB 200

¿Necesitas ayuda?

Si necesitas ayuda con Doro AUB 200 haz una pregunta a continuación y otros usuarios te responderán




telefono Doro Manuales

telefono Manuales

Últimos telefono Manuales