ECS K8T800-A Manual de Usario

ECS Placa madre K8T800-A

Lee a continuación 📖 el manual en español para ECS K8T800-A (10 páginas) en la categoría Placa madre. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

VT8237 SATA RAID User Manual

Enter BIOS Configuration Utility

When the system powers on, the following information will appear on

screen. Press the ‘Tab’ key to enter BIOS configuration

utility.

VIA Technologies,Inc.VIA Serial ATA RAID BIOS Setting Utility v1.00

Scan Devices,Please wait . . .

Press < Tab > Key into User Window!

Channel 0 Master: IC35L040AVVA07-0

Channel 1 Master: IC35L040AVVA07-0

The main interface of BIOS conguration utility is as below:

VIA Tech. RAID BIOS Ver 1.00

8Create Array Create a RAID array with

8Delete Array the hard disks attached to

8Create/Delete Spare VIA IDE controller

8Select Boot Array

8Serial Number View F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

VT8237 SATA RAID User Manual

Technical Reference Booklet

Create Disk Array

1. Use the arrow keys to navigate the main menu. Use the up and down arrow keys to

select the Create Array command and press <Enter> to call out the list of creation

steps.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For Data Security Create a RAID array with

8Array Mode RAID 1 (Mirroring) the hard disks attached to

8Select Disk Drives VIA IDE controller

8Start Create Process

F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

2. Highlight the Array Mode and press <Enter>, then a list of array modes will appear.

Just highlight the target array mode that you want to create, and press <Enter> to

VIA Tech. RAID BIOS Ver 1.00

8RAID 0 for performance Create a RAID array with

8RAID 1 for data protection the hard disks attached to

VIA IDE controller

8RAID SPAN for capacity

F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

3. After selected array mode, there are two methods to create a disk array. One method

is “Auto Setup Auto Setup” another is “Select Disk Drives”. let BIOS select the

disk drives and create array automatically. Select Disk Drives let user select the array

drives by required. When using Select Disk Drives method, the channel column will be

activated. Just highlight the target drives that you want to use and press <Enter> to

select them respectively. After all drives have been selected, press <Esc> to go back

to the creation steps menu.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For Performance Create a RAID array with

8Array Mode RAID 0 (Striping) the hard disks attached to

8Select Disk Drives VIA IDE controller

8Block Size 64K

8Start Create Process F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

[ * ]Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe0

[ ]Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Hdd

4. If user selected a RAID 0 array in step 2, user also can select a block size for the

array. Use the arrow key to highlight the Block Size and press <Enter>, then select a

block size from will popup. The block size can be selected from 4K to 64K Bytes.

VIA Tech. RAID BIOS Ver 1.00

8Auto Setup For 4K Create a RAID array with

8Array Mode RAID 8K the hard disks attached to

8Select Disk Dri 16K VIA IDE controller

8Block Size 64K 32K

8Start Create Pr 64K F1 : View Array/disk Status

éê : Move to next item

Enter : Conrm the selection

ESC : Exit

Channel Drive Name Array Name Mode Size(GB) Status

[ * ]Channel0 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe0

[ * ]Channel1 Master IC35L040AVVA07-0 ATA 100 38.34 Stripe1

Create Disk Array

Especificaciones del producto

Marca:	ECS
Categoría:	Placa madre
Modelo:	K8T800-A
Tipo de operación:	Draaiknop
Color del producto:	Zwart
Número de niveles de potencia:	3
Ancho:	240 mm
Profundidad:	405 mm
Altura:	625 mm
Longitud del cable:	1.45 m
Amable:	Olie elektrisch verwarmingstoestel
Activos:	2000 W
Indicadores LED:	Stroom
Adecuado para habitaciones de hasta:	20 m²
Almacenamiento de cable:	Ja
Luz indicadora:	Ja
Adecuado para:	Binnen
Termostato ajustable:	Ja
Cantidad por paquete:	1 stuk(s)
LED de encendido:	Ja
Protección contra sobrecalentamiento:	Ja
Manejas):	Ja
Fácil de instalar:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Ruedas:	Ja
Capacidad de calentamiento:	2000 W
Opciones de colocación:	Vloer
Tipo de elemento calefactor:	Olie
Número de elementos:	9
Potencia de calefacción (mín.):	800 W
Protección antivuelco:	Ja
Tipo de control del termostato:	Mechanisch
Fluido de operación:	Olie