Electro Harmonix 1440 Manual de Usario

Electro Harmonix No categorizado 1440

Lee a continuación 📖 el manual en español para Electro Harmonix 1440 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
Congratulations on your purchase of the 1440 Stereo Looper! Enjoy 1440
total seconds (24 minutes) of high-quality, stereo recording time and the
ability to store 20 different stereo loops. The 1440 looper is packed with
features such as reverse and octave speed effects, variable speed playback
and overdub, loop-stop fadeout, 1-shot, footswitch retrigger, the ability to
synchronize loops to MIDI clock and a downloadable Mac/Windows appli-
cation to easily transfer loops back and forth with a supplied USB cable.
Features Include:
t 24 minutes of loop recording time.
t 20 selectable, independent stereo loops that remain in memory until
you erase them.
t High quality, uncompressed audio: 24-bit A/D/A, 44.1kHz sample rate.
t Undo-Redo function (also available via optional footswitch).
t Reverse and Octave speed effects at the touch of a button or the
press of a footswitch.
t Footswitch selectable for STOP or Effects: Reverse, Octave or Loop
Retrigger.
t Unlimited overdubbing with adjustable Overdub feedback level.
t Optional external footswitch control for selecting loops and Undo/Redo.
t Programmable looping order: REC/PLAY/DUB or REC/DUB/PLAY.
t Adjustable fadeout time upon stopping a loop.
t Loop synchronization to external MIDI Clock.
t Downloadable Mac or Windows application for making easy loop
transfers between 1440 and computer.
t USB connection for loop audio transfers.
t AC adapter included.
WARNING: Your 1440 comes equipped with an Electro-Harmonix 9.6DC-200 power sup-
ply. The 1440 requires 150mA at 9VDC with a center negative plug. Use of the wrong
adapter or a plug with the wrong polarity may damage the device and void the warranty.
Do not exceed 10.5VDC on the power plug. Power supplies rated for less than 150mA will
cause the 1440 to act unreliably.
Table Of Contents
Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls, Connections and Indicators 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Looping Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Mode Knob Functions 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loop Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STOP [FX] Footswitch Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
External Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Fadeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Tempo Knob Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Reference Guide and Special Features 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 SHOT Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Looping Function Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Retrigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
USB File Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Firmware and App Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Factory Restore 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes and Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Warranty Information and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Electro-Harmonix
1440 Loop Manager
Computer Application
The 1440 app allows you to import
your 1440 loops to your computer
for back up or to use in other soft-
ware. The application also allows
you to export many types of audio
les—including mp3, wav, aiff, and
ac, at any sample rate and bit
depth—from your computer to the
1440, to use as if you recorded the
loop on the 1440 to begin with.
To download the application for Windows and Mac,
go to www.ehx.com/1440
- 15 -
WARRANTY INFORMATION
Please register online at www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix
will repair or replace, at its discretion, a product that fails to operate due to
defects in materials or workmanship for a period of one year from date of pur-
chase. This applies only to original purchasers who have bought their product
from an authorized Electro-Harmonix retailer. Repaired or replaced units will
then be warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period,
please contact the appropriate ofce listed below. Customers outside the re-
gions listed below, please contact EHX Customer Service for information on war-
ranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers:
please obtain a (RA#) from EHX Customer Service Return Authorization Number
before returning your product. With your returned unit, include a written descrip-
tion of the problem as well as your name, address, telephone number, e-mail
address, RA# and a copy of your receipt clearly showing the purchase date.
COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modications not expressly approved by the manufacturer could void the user’s authority
to operate the equipment under FCC rules.
United States & Canada
EHX Customer Service
Electro-Harmonix
co New Sensor Corp.
55-01 2nd Street
Long Island City, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
John Williams
Electro-Harmonix UK
13 Cwmdonkin Terrace
Swansea SA2 0RQ
United Kingdom
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
The CE logo indicates that this product has been tested and shown to
conform with all applicable European Conformity directives.
Quick Start Guide
Setting Up The 1440
1. Connect the supplied EHX9.6DC AC Adapter into the 9V jack at the top of the
1440. Plug the AC Adapter into your wall.
2. Connect your guitar or other instrument into the INPUT jack(s) using a
standard 1/4" instrument cable. Connect the OUTPUT jack(s) to your amp or
other audio device with another standard 1/4" instrument cable.
3. Make sure the MEM LED is not lit. If it is, turn the MODE knob to select a
bank where the MEM LED turns off, or press and hold the STOP [FX] footswitch
for a few seconds to erase loop memory for the currently selected bank.
Creating A Loop And Using The Loop Footswitch (EXT CLK Disabled)
1. Ensure the EXT CLK button light is off. If it is lit, press the EXT CLK button
once to shut off the light.
2. RECORD: To record a loop, simply press the LOOP footswitch. Recording will
begin immediately.
3. CLOSE THE LOOP: When you are ready to close the loop, and set the loop
length, press the LOOP footswitch again. Recording will stop immediately
and the loop will immediately begin play back.
4. OVERDUB: To record an overdub, press the LOOP footswitch while the loop
is playing back. Overdub recording will begin immediately.
5. OVERDUB END: Press the LOOP footswitch to end overdub recording and
change to playback.
Note: If you want your initial loop audio to be reduced in volume, do not
turn the OVERDUB knob up to maximum.
6. UNDO/REDO: Press and hold the LOOP footswitch for 2 seconds to Undo the
last overdub, or Redo an overdub that was just undone.
7. STOP: To stop the loop, double tap the LOOP footswitch or press the STOP
[FX] footswitch once. Playback will stop immediately.
Note: If the STOP [FX] footswitch function has changed, pressing it will not
stop the loop. See page 10 for details on the STOP [FX] footswitch functionality.
8. PLAY AGAIN: To start playing back a previously recorded loop, tap the LOOP
footswitch once. The loop will immediately start playing back.
Creating A Loop with MIDI Clock
1. Connect MIDI OUT from your MIDI Clock master device to the CABLE SETUP:
MIDI IN jack on the 1440.
2. 1440 SETUP: Enable external clock mode on the 1440 by pressing the EXT
CLK button so that it illuminates. Ensure the MEM LED is not lit. If it is lit, go
to a different loop bank.
3. MIDI MASTER PLAY: Press play on the MIDI Clock master. The 1 SHOT button blinks
on beat 1 only while the EXT CLK button blinks on the other beats in each bar.
- 3 -- 14 -
Notes and Specications
1440 Stereo Looper
t Audio input impedance for each input: 1MΩ
t Audio output impedance for each output: 370Ω
t Current draw: 150mA
t Maximum input signal level: +6 dBu
t Loop time: 24 minutes
t Audio quality: 24-bit, 44.1kHz Sample rate
t Bypass and dry signal: high quality analog buffered bypass at unity gain; dry
signal is analog through the 1440.
1440 Loop Manager Application System Requirements
t MAC: Operating system must be macOS X Sierra (10.12) or higher.
t Windows: Operating system must be Windows 7 or higher.
Firmware and App Updates
The 1440 Loop Manager app allows for updating the rmware on the 1440 and
the app software itself. Press the settings button in the upper right corner
of the app to reveal the settings menu. Here you can choose to update the
application by clicking on “Software Update…” or to update your 1440 unit
by choosing “Firmware Update…” For either selection, follow the instructions
presented to you on the screen.
Factory Restore
A factory restore clears out all loop memory and returns all parameters to
their factory defaults. To perform a Factory Restore:
1. Unplug the power jack or remove power to the 1440.
2. Hold down the LOOP footswitch while applying power to the 1440.
3. Continue to hold the LOOP footswitch until the REC, PLAY, and MEM LEDs
begin to ash together. This should take approximately 6 seconds.
4. Once all three LEDs start blinking you can release the footswitch. All three
LEDs will continue toash for about one second until the Factory Restore is
complete.
5. After Factory Restore, the display shows loop-select mode with LOOP 1 as
the default bank, fadeout disabled, all effects off, and STOP mode enabled.
Note: All Loop audio is erased during Factory Restore, and the process cannot
be undone.

Especificaciones del producto

Marca: Electro Harmonix
Categoría: No categorizado
Modelo: 1440

¿Necesitas ayuda?

Si necesitas ayuda con Electro Harmonix 1440 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Electro Harmonix Manuales

Electro Harmonix

Electro Harmonix Cock Fight Manual de Usario

17 Septiembre 2024
Electro Harmonix

Electro Harmonix Cock Fight Plus Manual de Usario

17 Septiembre 2024
Electro Harmonix

Electro Harmonix Holy Grail Max Manual de Usario

17 Septiembre 2024
Electro Harmonix

Electro Harmonix The Worm Manual de Usario

16 Septiembre 2024
Electro Harmonix

Electro Harmonix Canyon Echo Manual de Usario

16 Septiembre 2024
Electro Harmonix

Electro Harmonix Spruce Goose Manual de Usario

15 Septiembre 2024
Electro Harmonix

Electro Harmonix Germanium 4 Big Muff Pi Manual de Usario

15 Septiembre 2024
Electro Harmonix

Electro Harmonix LPB-3 Manual de Usario

15 Septiembre 2024
Electro Harmonix

Electro Harmonix Deluxe Memory Man 550-TT Manual de Usario

15 Septiembre 2024
Electro Harmonix

Electro Harmonix Germanium OD Manual de Usario

14 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024