Electro Harmonix 22500 Foot Controller Manual de Usario

Electro Harmonix No categorizado 22500 Foot Controller

Lee a continuación 📖 el manual en español para Electro Harmonix 22500 Foot Controller (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

22500 FOOT CONTROLLER

Remote Foot Controller for 22500 Dual Stereo

Looper

Thank you for purchasing the Electro-Harmonix 22500 FOOT CONTROLLER!

The 00 Foot Controller is a wired remote control for the 225 Dual Stereo 225 00

Looper giving your feet the ability to increment or decrement through the Loop

Banks.

The Looper records and plays in up to 100 Loop Banks per SDHC card. 22500

The Foot Controller makes it easy for your feet to navigate through the 22500’s

100 Loop Banks, moving up or down by either 1 or 10 banks at a time.

-CONNECTIONS -

Connect the 22500 Foot Controller (22500 FC) to your 22500 main unit using a

standard 1/4” mono instrument cable. Plug one end of the cable into the jack

labeled FC on the 22500 Looper. The other end of the cable should be inserted

into the 22500 FC’s jack at the top of the unit. The Foot Controller is now ready

for use.

- FOOTSWITCHES -

LOOP UP/DOWN Footswitches – Press and release the LOOP UP footswitch

to increment the Loop Bank number by 1 on the 22500 main unit. Press and

release the LOOP DOWN footswitch to decrement the Loop Bank number by 1.

Press and hold either footswitch for 1 second or longer to continuously jump up

or down by ten banks at a time. Release the FSW when you get to the Loop

Bank decade you need. It may be helpful to have Bank displayed on the 22500

main unit while changing banks with the 22500 FC.

The Loop Bank can be changed when the 22500 is either idle (stopped) or

playing back loops. If Loop A, B, or a Rhythm loop are playing at the time you

change Loop Banks, all of the loops stop play upon changing banks.

The 22500 FC footswitch presses are ignored if you press either footswitch while

recording or overdubbing on the 22500.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return the enclosed

warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a

product that fails to operate due to defects in materials or workmanship for a period of one year from

date of purchase. This applies only to original purchasers who have bought their product from an

authorized Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the

unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the

appropriate office listed below. Customers outside the regions listed below, please contact EHX

Customer Service for information on warranty repairs at info@ehx.com or +1- - -8300. USA and 718 937

Canadian customers: please obtain a (RA#) from EHX Customer Return Authorization Number

Service before returning your product. Include with your returned unit: a written description of the

problem as well as your name, address, telephone number, e-mail address, and RA#; and a copy of

your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX

c/o NEW SENSOR CORP.

47-50 33RD STREET

LONG ISLAND CITY, NY 11101

Tel: 718- - 937 8300

Email: info@ehx.com

Europe

JOHN WILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0RQ

UNITED KINGDOM

Tel: +44 179 247 3258

Email: electroharmonixuk@virginmedia.com

This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights

depending upon the laws of the jurisdiction within which the product was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

FCC COMPLIANCE

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV technician for help .

Especificaciones del producto

Marca:	Electro Harmonix
Categoría:	No categorizado
Modelo:	22500 Foot Controller
Ancho:	226 mm
Profundidad:	185 mm
red LAN:	Ja
Resolución Máxima:	4096 x 2160 Pixels
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Número de puertos Ethernet LAN (RJ-45):	1
HDCP:	Ja
Software incluido:	Norton Internet Security (OEM)\nRealtek 8118 Gaming LAN bandwidth Control Utility
Soporta Windows:	Windows 10 x64
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 1200
Fabricante del procesador:	Intel
Memoria interna máxima:	64 GB
Canales de salida de audio:	7.1 kanalen
ETC:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel B460 Express
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC887
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x16 (Gen. 3.x):	1
Ranuras PCI Express x1 (Gen 3.x):	1
Interfaces de unidad de almacenamiento compatibles:	SATA III
Puerto(s) PS/2:	2
Componente para:	PC
Tipos de incursión:	0, 1,5, 10
Adaptador de gráficos de memoria máxima:	512 MB
Número de conectores SATA III:	4
No ECC:	Ja
Procesadores compatibles:	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Tipos de memoria soportados:	DDR4-SDRAM
Máx. número de procesadores SMP:	1
Wifi.:	Nee
Código del Sistema Armonizado (SA):	84733020
Tipos de unidades de almacenamiento compatibles:	HDD & SSD
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	2133,2400,2666,2933 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	128 Mbit
Versión ACPI:	5.0
Versión del BIOS de administración del sistema (SMBIOS):	2.7
Soporte para procesamiento paralelo:	Niet ondersteund
Conexión para refrigerador de CPU:	Ja
Conector de alimentación ATX (24 pines):	Ja
Conector del panel frontal:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
monitor de salud de la computadora:	FAN, Temperature, Voltage
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Borrar puente CMOS:	Ja
Número de ranuras M.2 (M):	1
conector de alimentación de 12V:	Ja
Carril de conexión LED RGB:	Ja
Encabezados de puerto serie:	1
Versión Interfaz de administración de escritorio (DMI):	2.7