Electro Harmonix Canyon Manual de Usario

Electro Harmonix No categorizado Canyon

Lee a continuación 📖 el manual en español para Electro Harmonix Canyon (13 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/13

CANYON

Multifunction Delay & Looper

Congratulations on your purchase of the Canyon, an tremely powerful yet ex

easy- -use Delay and Looper pedal. to Within the compact Canyon chassis there’s

a vast array of awe-inspiring tones including 10 different types of delays from :

pristine digital to warm tape and more. We’ve even included an exquisite Deluxe

Memory Man emulation plus otherworldly octave delay and shimmer effects. Add

in a full-featured looper, built- or external tap tempo with tap divide, a in

selection of secondary controls and you’re in for a truly grand delay experience.

- GETTING STARTED WITH THE CANYON -

1. Plug the supplied EHX9.6DC AC Adapter into the jack at the top of

the CANYON.

2. Plug your guitar into the INPUT jack and plug the OUTPUT jack into

your amplifier.

3. Turn the 11-position mode knob to the ECHO setting for a standard

digital delay.

4. Set the number of repeats with the FEEDBACK knob, the delay time

with the DELAY knob, and the delay volume with the FX LVL knob.

- TABLE OF CONTENTS -

Getting started with the CANYON 1

Controls 2

Connections 3

Description of modes 4

Using the CANYON’s Loop Mode 5

Tap Tempo with the CANYON 7

Secondary Knob Functionality 9

Secondary Controls Chart 12

Warranty Information and FCC Compliance 13

- CONTROLS -

FX LVL Knob Controls the output volume of the delay effect. When –

this knob is at the minimum position, the output is only your dry signal.

As the knob is turned up, the delay output increases in volume. As the

knob is turned past 2 o’clock, the dry signal decreases in volume. When

the knob is at the maximum position, the output is only the delay output.

Note: in S/H and LOOP modes, the dry signal remains at unity volume

even as FX LVL is turned to maximum

DELAY Knob Controls the delay time of the CANYON, from a –

minimum position of 5 milliseconds to a maximum of 3 seconds.

FEEDBACK Knob Controls the number of repeats of the delayed –

signal. As this knob is turned clockwise, the number of repeats increases.

In S/H mode, this knob controls the pluck detection sensitivity. As the

knob is turned clockwise, the sensitivity increases.

In LOOP mode, this knob controls how much of the existing loop is

preserved when overdubbing. As the knob is rotated clockwise, more of

the existing loop is preserved. At the maximum position, the loop will

stay the same volume while overdubbing.

MODE Knob This knob is an 11-position rotary switch that selects –

which of the CANYON’s delay modes is active.

TAP/DIVIDE Switch and LED This switch controls the Tap Divide –

setting. When the delay time is set using tap tempo, this button controls

the division of the tapped tempo. Press the switch to cycle through the

Tap Divide options, which are indicated by the LED color. Red indicates

quarter notes, orange indicates dotted eighth notes, and green indicates

eighth notes. If the LED does not change color when pressing this

switch, internal Tap Tempo is disabled. Tap Tempo with the See “

CANYON on page 7 for the details of tap tempo use. ”

Footswitch Press this footswitch to switch the pedal between bypass –

and effect modes. When the pedal is in effect mode, the LED will be lit.

The footswitch can also be used to set the delay time by tapping it at

least two times. This functionality is enabled from the factory, but can be

disabled. See “Tap Tempo with the CANYON” on page 7 for details.

TAILS Switch The CANYON allows you to choose whether delayed –

echoes continue to repeat or stop immediately after the pedal is

switched to bypass. To control this, remove the CANYON’s bottom cover

and locate the small slide switch on the bottom of the board labeled

“TAILS.”

When Tails are set to ON, the echoes will continue to repeat after the

pedal is switched to bypass, with the number of repeats set by the

FEEDBACK knob. Anything you play after entering bypass will not repeat.

If the pedal is set for infinite feedback (i.e. the FEEDBACK knob is set to

maximum) the repeats will continue until you turn the FEEDBACK knob

down or switch to a different mode.

Note: In Sample/Hold mode, repeats will not continue indefinitely when

Tails are ON. The repeats will fade out over half a second.

When Tails are set to OFF, all repeats will stop as soon as the bypass

switch is pressed, regardless of the FEEDBACK knob setting.

- CONNECTIONS -

INPUT Jack – This ¼” jack is the audio input of the CANYON. The

input impedance is 1M . 

OUTPUT Jack ON. The output – This ¼” jack is the audio output of the CANY

impedance is 680 .

TAP IN Jack Connect an external momentary footswitch to this – ¼”

jack to control the delay time by tapping in a tempo. The external switch

should be normally open. Upon engaging the switch, it should create a

short circuit between the Tip and Sleeve of the plug. See “Tap Tempo

with the CANYON” on page 7 for details on using Tap Tempo.

9V Power Jack – Plug the output of the CANYON’s supplied EHX9.6DC

200mA AC adapter in the 9V power jack located at the top of the pedal.

The CANYON requires 150mA at 9VDC with a center-negative plug.

Especificaciones del producto

Marca:	Electro Harmonix
Categoría:	No categorizado
Modelo:	Canyon
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Rotary, Touch
Color del producto:	Black, Stainless steel
Bisagras de puerta:	Neer
Pantalla incorporada:	Ja
Peso.:	31300 g
Ancho:	594 mm
Profundidad:	548 mm
Altura:	595 mm
Impuesto neto:	3600 W
Parrilla:	Ja
Longitud del cable:	1.2 m
Bloqueo infantil:	Ja
Clase-de-eficiencia-energética:	A
Iluminación interior:	Ja
Reloj integrado:	Ja
tipo de reloj:	Elektronisch
Cocinar por convección:	Ja
cocinar al vapor:	Nee
asador:	Nee
Número de lámparas:	1 lampen
tipo-de-lámpara:	Halogeen
Capacidad interior total (hornos):	71 l
Número de hornos:	1
Posición de control:	Voorkant
Ancho del compartimento de instalación:	568 mm
Profundidad del compartimento de instalación:	550 mm
Altura del compartimento de instalación:	595 mm
Actual:	16 A
Material a través:	Glas
Altura del compartimento de instalación (mín.):	585 mm
Consumo de energía (convencional):	0.97 kWu
Consumo de energía (convección forzada):	0.81 kWu
Índice de Eficiencia Energética (IEE):	95.3
Cocinar:	Ja
Tamaño del horno:	Middelmaat
tipo de horno:	Elektrische oven
Potencia total del horno:	- W
Horno de capacidad neta:	71 l
magnetrón:	Nee
Calefacción superior e inferior:	Ja
Rango de termostato del horno:	50 - 275 °C
Dimensiones de la bandeja para hornear:	Ja
Temperatura de la puerta (máx.):	50 °C
Superficie efectiva del cajón:	1290 cm²
Tipo temporizador:	Digitaal
Profundidad cuando la puerta está abierta.:	1040 mm
Ancho del compartimento de instalación (mín.):	560 mm
Número de programas de cocina:	5
Calentamiento de toda la superficie de la parrilla + convección (modo único):	Ja
Calor rápido:	Ja
Número de posiciones de estante:	5
Incluye parrilla:	Ja
Dimensiones interiores (An x Pr x Al):	480 x 415 x 357 mm
cocción lenta:	Nee
Calentamiento de toda la superficie de la parrilla:	Ja
Temperatura máxima (convencional):	275 °C
Temperatura máxima (convección):	275 °C
voltaje-de-entrada-de-CA:	220-240 V
Tipo-de-visualización:	LED