Electrolux EHG 77 Manual de Usario

Electrolux horno EHG 77

Lee a continuación 📖 el manual en español para Electrolux EHG 77 (6 páginas) en la categoría horno. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
AU
INSTALLATION AND USER INSTRUCTIONS
MONTAGNANI Cod. 534928 - Modena - Italy - 0902
U S E R I N S T R U C T I O N S
After cleaning, make sure head “C” and covers “A” and “B” are
properly placed on their seat as figure “C” and not off-center as
in gure “D”.
TROUBLE - SHOOTING GUIDE
BEFORE YOU CALL THE SERVICE MAN
A review of the following may save you a service call and if not
it may help you explain the malfunction to the serviceman. Read
the operating instructions carefully. Be sure you know how to
opera the appliance. If base of cooking utensils show signs of
carbon (soot) deposit, this could indicate an incorrect burner flame.
Please contact local service number (refer to the data label on the
front of this instruciton manual).
THE BURNER DOES NOT LIGHT
• Check to ensure Hotplate cord is plugged into outlet. Check for
a blown fuse or tripped circuit breaker.
• Hotplate not properly grounded or polarized. This can effect
ignition on spark ignition models.
• Check for power wattage.
• Gas supply not connected or not turned on.
A pan is sitting on the burner grate. This may partially block the
free air flow needed for combustion. Remove the pan and try
again.
• Burners not adjusted properly.
Food clogging burners or burner assembly misaligned. Make
sure that burner ports on side of burner are not clogged. Make
sure that burners are positioned correctly.
WHEN YOU CALL FOR SERVICE
When you call for service or order parts for your Hotplate be sure
to give:
1. MODEL
2. SERIAL NUMBER
3. COLOUR
4. PART NAME and/or description of problem
5. YOUR FULL NAME, ADDRESS, and HOME TELEPHONE
NUMBER and BUSINESS TELEPHONE NUMBER IF
APPROPRIATE.
Fig. DFig. C
burner cap
locating pegs
notch for electrode
in burner head
electrode
HOT PLATES
BABA
B
A
C
ABNORMAL OPERATION
Any of the following are considered to be abnormal operation and
may require servicing:
Yellow tipping of the hob burner ame.
Sooting up of cooking utensils.
Burners not igniting properly.
Burners failing to remain alight.
Burners extinguished by cupboard doors.
Gas valves, which are dicult to turn.
In case the appliance fails to operate correctly, call the number on
the data label located on the front of this manual.
2 11
I N D E X
INSTALLATION INTRUCTIONS ...................pag. - 63
SERVICE INSTRUCTIONS..........................pag. 7 - 8
USERS INSTRUCTIONS .............................pag. 10 - 12
ENVIRONMENTAL WARNING
Waste packaging
Do not throw the packaging of your appliance into the dustbin, but pick
out the different materials (e.g. foil, paperboard, polystyrene) according
to the local rules for recycling.
This appliance must only be used for the purpose of domestic cooking.
WARNING
* This appliance is not intended for use by young children or infirm
persons without supervision.
* Young children should be supervised to ensure that they do not play
with the appliance.
WHERE THIS APPLIANCE IS INSTALLED IN MARINE CRAFT OR
IN CARAVANS, IT SHALL NOT BE USED AS A SPACE HEATER.
Congratulations Hot Plate on the purchase of your new
which is built to give you years of satisfactory service and pleasure when properly cared for and used.
Producing an ecient Hotplate that conserves energy required a consider able investment of time, effort and money.
Your Hotplate is engineered to surpass all performance and safety requirements. However, safety is also YOUR responsibility
through proper use and care.
With this in mind, it is important that you read this booklet. Acquaint yourself with the features and follow the use and care
suggestions carefully for complete satisfaction.
Remember: only authorised personnel must make the necessary gas and electrical connections.
Be sure you know the correct model and serial model of your Hotplate. The data plate is sealed on the outside of the lower
case of your Hotplate.
RECORD HERE FOR EASY REFERENCE
Model Colour Serial Number
Installation Date
Dealer's Name and Address
U S E R S I N S T R U C T I O N S
CLEANING
Cleaning should only be carried out when the appliance is COOL
and is SWITCHED OFF.
Always clean off spillage as quickly as possible to prevent burning
which will make removal more difficult. Do not use harsh abrasive
rags or products; they can seriously damage the appliance. For
Hotplate top and enamelled pan supports use a wet cloth with
liquid detergent.
as they are inherently unstable.
To save gas, always position pans centrally over the burners and
adjust the flames so that they do not lick up the sides of the
panand only the base is heated. Always put lids on a saucepans
and boil only the amount of liquid you use. When the liquid has
boiled adjust the setting to maintain a simmer.
Do not light the burner until the pan is in position and turn off the
burner before removing the pan. In hard water areas, descale
kettles regularly. For safety, keep saucepan handles turned to a
safe position so they are out of reach of small children and cannot
be accidentally knocked.
WARNING
It is not recommended to press push button for ignition if all the
burners are not located in the proper positions. The burner heads,
burner skirts and pan supports are removable for better cleaning:
Always ensure that the burner skirts and heads are replaced
correctly so that the burners function safely and correctly.
During the use of the appliance pay attention that water or any
liquid does not enter into the appliance through the holes of the
burners or around the rods of the valves or the push button
electronic lighter.
Water and other liquids will produce dangerous short-circuits and
can seriously damage the working of the Hotplate. The base of
the Hotplate casing will become hot in use and must not be
touched through a drawer or cupboard openings.
Where this appliance is installed in marine craft or in caravans,
it shall not be used as a space heater.
Do not spray aerosols in the vicinity of this appliance while
it is in operation.
1) If you smell gas:
— open the windows
— don’t touch electrical switches
— extinguish any open ame
never use a flame to locate such a leak, use soapy water
only
— contact authorised technician.
2) Keep children away from the appliance: they can suffer serious
personal harm by touching the hot parts of the appliance and
the pans.
3) Don’t store items that are attractive to children above or near
the appliance.
4) Do not store flammable products near the burners such as
fabric, cartons or plastic boxes and especially aerosol containers.
5) In order to avoid any unintentional fall down, pan handles
should be turned to the back of the cooker, not out to the room
or over adjacent burners.
6) When cooking, don’t wear clothes with flammable sleeves.
FOR YOUR SAFETY
10 3
I N S T A L L A T I O N S I N S T R U C T I O N S
GAS CONNECTION
The appliance shall be installed by an authorized person in
accordance with the manufacturer’s installation instructions,
relevant local fitting regulations, municipal building regulations,
the AS5601 ( AG601 ) - Gas Istallation . For gas burning appliances
and equipment and other relevant statutory code band regulations.
If you have some doubts, please contact the authorities for
confirmation concerning the characteristics of the gas and electricity
output.
The appliance is generally preset for natural gas (so no other
adjustment is necessary) and equipped with a regulator with
pressure test point. Ensure that all foreign matter has been cleared
from the gas supply line and also purge all air from the gas system.
Connect to regulator, tighten and check the installation to ensure
This appliance from the factory suitable for NATURAL gas but, if
necessary, can be adjusted for U-LPG or TLP gas by a competent
licensed person.
This appliance is of type "X" with regard to protection against over
heating of surrounding surfaces.
5 BURNER UNIT
DIMENSIONS
Overall Height above work surface ...................................45 mm
Width .........................................................................680 mm
Depth.........................................................................510 mm
Minimum space above hotplate ......................................600 mm
CONNECTIONS
Gas..............................................................RC 1/2 (1/2" B.S.P.)
Electric ......................1 mm2 3 core cable (3 amp fuse required)
Should conform to local gas authority requirements.
Also refer to rangehood manufacturers recommendations.
GAS HOT PLATE
U S E R S I N S T R U C T I O N S
To light the burner, turn the appropriate knob anticlockwise to the
low position (marked with a small flame symbol ) and depress
the ignition button and release. If burner does not ignite repeat
the procedure. To adjust the burner to the full-on position, turn the
control knob clockwise to the appropriate setting (marked with a
large ame symbol ).
Where this appliance is installed in marine craft or in caravans,
it shall be used as a space heater".NOT
To turn the burner OFF, turn the control knob clockwise to the
OFF setting (marked with a dot ).
APPLIANCES WITH SAFETY VALVE
Follow the same procedure described above to ignite the burners.
In this case, however, once you have turned the knob to the open
setting, hold it pressed in for 10 seconds. If for any areason the
burner flame goes out, the safety valve automatically shuts off the
gas supply to the burner in question.
It is recommended that pans suitable to the size of the burner
should de used as follows:
Burner minimum maxmum
diameter diameter
Large (rapid) 180mm 230mm
Medium (semi-rapid) 120mm 200mm
Small (Auxiliary) 80mm 160mm
Triple Flame 220mm 260mm
Always use pans with all flat base diameter, which are well balanced
and stable in use, a pan which overhangs the hotplate should not
be used. Avoid using old, misshapen pans, or pans which are
unstable when placed on a flat surface. Do not use “split pans”
kpa with middle front and right front burners operating at full rate.
Apply a manometer to the test nipple and reset the regulator if
necessary.
Do not forget to replace the test nipple screw and to leave the
instructions book with the user.
For the adjustments to TLP or U-LPG gas, please operate as
specified in the paragraph GAS CONVERSION AND
ADJUSTMENT (Page. 8).
Important: several parts are protected with a special anti-scratch
lm. Please remove it before use.
IMPORTANT NOTICE TO THE INSTALLER
“SAFETY WARNINGS ABOUT INSTALLATION”
The cooker be installed and serviced by a qualified technicianMUST
A Certicate of Compliance be supplied to be kept by theMUST
customer.
The packing materials MUST be removed before you install the
cooker
You follow the installation instructions in this book.MUST
The surrounding kitchen cabinets MUST be able to withstand 85’C
The pipes used for installation MUST have sufficient loops so the
cooker can be moved for service.
The vents, openings and air spaces MUST not be blocked
The anti-tilt bracket be installed to avoid accidental tippingMUST
You not pull the cooker by the door handles or rear splashMUST
panel
The cooker be checked every ve years..MUST
no gas leaks occur. Check gas pressure, a duplicate label is
supplied and adhered to the front of this instruction manual, note
the correct setting from the data plate sealed on the lower side
of the case. 5 burner models: "burner pressure is to be set at 1
Dual triple ame version
no gas ow
maximum gas ow from central burner
minimum gas ow from central burner
maximum gas flow from outer and central burners
simultaneously
minimum gas flow from outer and central burners
simultaneously
B
A
A
D
C
A-Burner cap
B-Lighting plug
C-Triple ame cap
D-Flame-spreader
D

Especificaciones del producto

Marca: Electrolux
Categoría: horno
Modelo: EHG 77

¿Necesitas ayuda?

Si necesitas ayuda con Electrolux EHG 77 haz una pregunta a continuación y otros usuarios te responderán




horno Electrolux Manuales

horno Manuales

Últimos horno Manuales