Electrolux Pure I9 Manual de Usario

Electrolux aspiradora Pure I9

Lee a continuación 📖 el manual en español para Electrolux Pure I9 (100 páginas) en la categoría aspiradora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/100

Instruction Book

GB INSTRUCTION BOOK

DK VEJLEDNING

NO BRUKSANVISNING

DE ANLEITUNG

IT ISTRUZIONI

NÁVOD NA POUŽÍVANIE

CZ PŘÍRUČKA K POUŽITÍ

HR KNJIŽICA S UPUTAMA

SE BRUKSANVISNING

FR MODE D’EMPLOI

FI OHJEKIRJA

PL INSTRUKCJA OBSŁUGI

Safety precautions

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

The robot should only be used for normal

vacuuming in a domestic/indoor environment.

Make sure the robot is stored in a dry place.

All service or repairs must be carried out by an

authorized Electrolux service centre.

Remove the robot from the charger before cleaning

or maintaining your robot.

Do not allow children to play with the appliance.

Packaging material, e.g. plastic or fabric bags should

not be accessible to children to avoid suocation.

The robot is designed for a specic voltage. Check

that your supply voltage is the same as that stated

on the rating plate on the charging adaptor.

Use only the original charging station and adaptor

designed for the robot.

Never use the robot:

• In wet areas.

• Close to ammable gases, etc.

• When the product shows visible signs of damage.

• On sharp objects or uids.

• On hot or cold ashes, lighted cigarette butts, etc.

• On ne dust, for instance from plaster, concrete,

our, hot or cold ashes.

• Do not leave the robot in direct sunlight.

• Avoid exposing the robot to strong heat.

• The battery pack within must not be dismantled,

short circuited or placed against a metal surface.

Use only the battery pack designed for the robot.

• Batteries must be removed from the appliance

before it is disposed of.

• The appliance must not be plugged in when

removing the battery.

• The battery is to be disposed of safely.

• Never use the robot without lter.

• Do not touch the brush roll while the cleaner is

switched on and the brush roll is turning. Do not

touch the wheels while the robot is operating.

Using the robot in a manner that conicts with

above recommendations may cause serious

personal injury or damage to the product. Such

injury or damage is not covered by the warranty or

by Electrolux.

The warranty does not cover reduction in battery

runtime due to battery age or use, as the life of the

battery depends upon the length and number of

times the robot is used.

Before cleaning, remove small and fragile objects

such as clothing, curtain strings, papers and power

cords from the oor. If the device passes over a

power cord and pulls it, there is a risk that an object

could be pulled o a table or shelf.

The robot is designed to not move any larger objects

in its way. Objects such as chairs can therefore be

left on the oor as the robot will clean around them.

Strong light, mirrored walls, oor-to-ceiling windows

and very shining objects could disturb the 3D Vision

system.

Visit our website to:

Get usage advice, brochures,

trouble shooter, service information:

www.electrolux.com

www.electrolux.com/productregistration

Buy Accessories and Consumables for

your appliance:

www.electrolux.com/shop

Safety precautions

Recommended operation, charging and storage environment

for Electrolux battery products

1. Operation, charging and storage conditions

This product is intended to be used in normal

household environment and should not be exposed

to abnormal temperature.

To protect the internal parts of product it should not

be stored, charged or operated in:

• An ambient temperature below 10 °C or exceeding

30 °C.

• If the product is stored in temperature below 10 °C

or exceeding 30 °C. Please wait a few hours so that

the internal components of the products can cool

down or warm up and dry before usage. Usage

and storage outside temperature interval might

harm the product or reduce lifetime.

• Below 20% or over 80% humidity levels (Non-

Condensing)

Charge the product for minimum 24 hours:

• Before rst use.

• Before storage for a longer time period. (Remove

batteries from the robot before long time storage.)

• After storage for a longer time period.

2. Dew condensation warning

Dew condensation may form inside the product

under the following conditions:

• The unit is moved from a cold to a warm place.

• Under conditions of very high humidity.

• After heating a cold room.

Please wait a few hours for the internal components

of the products to warm up and dry before usage.

3. To preserve the battery life and performance:

• Always keep the robot charging when not in use.

• Charge it as soon as possible after the cleaning

cycle. Waiting too long might aect the batteries.

Environmental concerns

This symbol on the product indicates that

this product contains a built-in rechargeable

battery which shall not be disposed with

normal household waste.

This symbol on the product or on its

packaging indicates that the product may not

be treated as household waste.

To recycle your product, please take it to an

ocial collection point or to an Electrolux

service center that can remove and recycle

the battery and electric parts in a safe and

professional way. Follow your country’s

rules for the separate collection of electrical

products and rechargeable batteries.

Customer care and service

When contacting the Electrolux service center,

ensure that you have following data available:

- Model number

- PNC number

- Serial number

The information can be found on the rating plate.

Model number

PNC number Serial number

Especificaciones del producto

Marca:	Electrolux
Categoría:	aspiradora
Modelo:	Pure I9
Color del producto:	Zwart
Amable:	AV-receiver
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Resolución Máxima:	4096 x 2160 Pixels
HDCP:	Ja
Conexión para adaptador de red:	Ja
3D:	Ja
Material:	Metaal
Resoluciones de gráficos compatibles:	3840 x 2160,4096 x 2160
Conecta y reproduce:	Ja
Número:	1
Impedancia:	100 Ohm
Temperatura de almacenamiento:	-20 - 60 °C
Es posible actualizar el firmware:	Ja
Montaje en bastidor:	Ja
Banda-ancha:	10.2 Gbit/s
Número de salidas HDMI:	1
Configuración del receptor (B x D x H):	73 x 86.4 x 24.7 mm
Tensión de funcionamiento:	5 V
Rango-maximo:	- m
Consumo de energía (típico):	3.9 W
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	0 - 80 procent
Control-de-electrónica-de-consumo-(CEC):	Ja
Peso del receptor:	170 g
Tipos de cables compatibles:	Cat5e, Cat6, Cat6a