Elektrobock BT52 Manual de Usario
Elektrobock
Termostato
BT52
Lee a continuación 📖 el manual en español para Elektrobock BT52 (20 páginas) en la categoría Termostato. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/20

1
B
B
B
BT52
T52
T52
T52
BT52
WIRELESS ROOM THERMOSTAT
for boilers with OpenTherm communication
The BT52 wireless thermostat is designed to control gas and electric boilers that use the OpenTherm plus (OT +) commu-
nication protocol. It consists of a receiving part (receiver) and a transmitting part (transmitter), which use two-way wireless
communications on the frequency of 433.92 MHz. This wireless variant allows for easy and quick installation, thus eliminating
the laborious and time-consuming installation of the line between the thermostat and the boiler with a passage through the
oor. The receiver is connected to the boiler via the OT communication line. This line transmits data and also powers the rece-
iver. The receiver immediately transmits the data obtained from the boiler to the transmitter, where the data is processed. The
required heating water is calculated and this request is sent back to the boiler.
receiver
transmitter
• Possibility to place a thermostat (transmitter) as needed.
• Predictive system (smart timer) guarantees determined
temperature at the required time. The adaptive controller evaluates
temperature gradient of the room and can determine the necessary
time to reach the required temperature.
• 9 weekly programs (optional) for UT (6 temperature changes
for a day).
• 1 week program (optional) for DHW (3 time periods
with dierent temperatures).
• Choice of regulation type:
equithermal regulation
equithermal control with internal temperature correction
PI regulation
• Display of operating hours information for UT / TUV.
• Display of outdoor temperature information.
• Display of heating water temperature and modulation power in-
formation.
• Display of additional information sent by the boiler to the receiver
(water ow in liters, return temperature, etc. depending on the type
boilers).
• E-EPROM memory retains all settings indenitely
even in the event of a power failure.
• Possibility of control via GSM module GST1 or GST2 (optional).
• Automatic changeover to WINTER or SUMMER time.
• Automatic indication of boiler maintenance.
• Measured temperature -9 ° C to 39 ° C.
• Antifreeze mode.
• Holiday mode and summer mode.
• Power supply 2x1.5 V alk. battery
• Power supply via OT communication
line directly from the boiler (or external
adapter AD05 - not included)
• Receiver with SELF-LEARNING system
CODES and with E-EPROM memory (sto-
re code even in case of power failure).
• Visual inspection of conditions
using colored indicator LEDs.
•The receiver keeps the last settings
and in the event of a wireless failure
signal, ensures the operation of the boiler.
ca 25 m
BOILER
with OpenTherm
communications
over one
oor

2
CONTENT
Description BT52 ............................................................... .1p
Content ............................................................... .2p
Properties BT52 ............................................................... .3p
Function .......................................................... p.3
Commissioning diagram .......................................................... p.3
Receiver BT52 ............................................................... .4p
Assembly .......................................................... p.4
Wireless mode .......................................................... p.5
Receiver coding .......................................................... p.5
Transmitter BT52 ............................................................... .6p
Description of controls .......................................................... p.6
Battery placement .......................................................... p.6
Transmitter disassembly .......................................................... p.6
Display description .......................................................... p.7
Operating modes (AUTO, MANU ..) .......................................................... p.8
Setting of temperature programs for UT and TUV .......................................................... p.9
Table of free and preset programs .......................................................... p.9
Setting constants CONST1 to CONST7 .......................................................... p.10
CONST1 Language selection ..................................................................... .10p
CONST2 Minimum regulated temperature ..................................................................... .10p
CONST3 Maximum regulated temperature ..................................................................... .10p
CONST4 Minimum water temperature in the heating system ..................................................................... .10p
CONST5 Maximum water temperature in the heating system ..................................................................... .10p
CONST6 Choice of regulation type ..................................................................... .10p
CONST7 PI control interval ..................................................................... .10p
Setting the CONST8 constant .......................................................... p.11
CONST8 Proportional band of PI regulation ..................................................................... .11p
Setting constants CONST9 to CONST12 .......................................................... p.12
CONST9 Manual or automatic heating curve correction .................................................................... .12. p
CONST10 Building insulation ...................................................................... .12p
CONST11 Equithermal control interval ...................................................................... .12p
CONST12 Equithermal control reaction rate ...................................................................... .12p
Setting constants CONST13 to CONST20 .......................................................... p.13
CONST13 Premature heating on ...................................................................... .13p
CONST14 Summer mode ...................................................................... .13p
CONST15 Odd - even week choice ...................................................................... .13p
CONST16 Temperature correction ...................................................................... p.13
CONST18 Choice of control via GSM module ...................................................................... .13p
CONST19 Phone number setting ...................................................................... .13p
CONST20 Setting the PIN code of the used SIM card ...................................................................... .13p
Setting constants CONST21 to CONST27 .......................................................... p.14
CONST21 Function test ...................................................................... .14p
CONST22 Key lock ...................................................................... .14p
CONST23 Key code ...................................................................... .14p
CONST24 Boiler maintenance indication ...................................................................... .14p
CONST26 Boiler type selection ...................................................................... .14p
CONST27 Password (against setting change) ...................................................................... .14 p
Other displayed information .......................................................... p.15
Error messages .......................................................... p.16
Antifreeze mode .......................................................... p.16
GSM module connection .......................................................... p.16
Control when using the GSM module .................................................................. p.17
Technical parameters ......................................................... p.18
For easier orientation in the manual, each page is marked with the symbol of the part of the thermostat to
which it applies specied settings:
RECEIVER TRANSMITTER

3
BT52 FEATURES
Before using the thermostat, it is necessary to verify which functions from the OpenTherm protocol your
heating device uses (some heating devices do not use all the functions of the OpenTherm protocol)!
OpenTherm Plus / Lite (OT + / OT-) protocol: based on this protocol, two-way communication (OT +) takes place
between the thermostat receiver and the boiler. The thermostat receiver obtains the necessary information (eg
about the outdoor temperature), which it then processes and transmits to the transmitter. From the information
obtained about the outdoor temperature, the room temperature and the set constants, the thermostat recalculates
the desired water temperature of the heating system and passes it back to the boiler. This wireless communication
system enables optimal operation of the boiler and heating system, including DHW, thus achieving longer boiler
life and higher savings.
In order to avoid interference and inuence from other BT52s in the vicinity, each thermostat is protected
by its own unique code, which is stored at the factory! As the whole system works on the two-way radio fre-
quency 433.92 MHz, follow the instructions for mounting and positioning the thermostat according to the
instructions!
!BT52 FUNCTIONS
Equithermal regulation
Equithermal control with manual curve correction
Equithermal control with automatic correction according to the eect of room temperature
Correction of the inuence of building dynamics (for equithermal regulation)
PI control (regardless of outdoor temperature)
Premature heating on (adaptive controller evaluates the room temperature gradient
and can determine the time necessary to reach the desired temperature at a given time)
Setting the minimum and maximum water temperature in the heating system
DHW preparation program (3 time intervals per day)
Holiday mode (constant temperature during the holiday)
Summer mode
COMMISSION SCHEME BT52
STUDY MANUAL
BT52
p.1-18
RECEIVER ASSEMBLY
BT52
p.4
TRANSMITTER
RECOVERY
p.6
BT52 TRANSMITTER FUNCTION
SETTINGS p.7-17
WIRELESS MODE SETTINGS
p.5
TRANSMITTER CONTROL
BT52
p.8-17
SERVICE
TECHNICIAN
USER
Follow the instructions to install the receiver and
connect via the communication line to the boiler
(or connect an external adapter).
Operate the transmitter by removing the pro-
tective paper from the batteries (display is active).
Set the clock, programs (PROG), constants
(CONST) and operating mode (AUTO / MANU).
The receiver is coded at the factory.
When the red Error LED on the receiver ashes ,
perform a TEST on the transmitter (see page 8).
If the wireless mode is not switched on, it is nece-
ssary to perform the coding, see p.5!
Especificaciones del producto
Marca: | Elektrobock |
Categoría: | Termostato |
Modelo: | BT52 |
¿Necesitas ayuda?
Si necesitas ayuda con Elektrobock BT52 haz una pregunta a continuación y otros usuarios te responderán
Termostato Elektrobock Manuales

13 Septiembre 2024

7 Septiembre 2024

7 Septiembre 2024

7 Septiembre 2024

7 Septiembre 2024

7 Septiembre 2024

7 Septiembre 2024

6 Septiembre 2024

31 Agosto 2024

29 Agosto 2024
Termostato Manuales
- Termostato ATAG
- Termostato Bosch
- Termostato AEG
- Termostato Panasonic
- Termostato Honeywell
- Termostato Junkers
- Termostato Nefit
- Termostato Remeha
- Termostato Siemens
- Termostato Vaillant
- Termostato Ambiano
- Termostato Alecto
- Termostato Amfra
- Termostato Google
- Termostato GE
- Termostato Silvercrest
- Termostato Renkforce
- Termostato Itho
- Termostato De Dietrich
- Termostato TP Link
- Termostato Elro
- Termostato EMOS
- Termostato Truma
- Termostato Intergas
- Termostato Energenie
- Termostato Schneider
- Termostato Hama
- Termostato Fenix
- Termostato Theben
- Termostato AVM
- Termostato Devi
- Termostato Stiebel Eltron
- Termostato Buderus
- Termostato Velleman
- Termostato Dimplex
- Termostato Emerson
- Termostato Vemer
- Termostato Profile
- Termostato Ferroli
- Termostato Magnum
- Termostato Horstmann
- Termostato Salus
- Termostato Tylö
- Termostato Somfy
- Termostato Grohe
- Termostato Corberó
- Termostato Oventrop
- Termostato King
- Termostato Technoline
- Termostato Devolo
- Termostato Arnold Rak
- Termostato Heatmiser
- Termostato Viessmann
- Termostato Carrier
- Termostato Nest
- Termostato Itho-Daalderop
- Termostato Hive
- Termostato Danfoss
- Termostato Saunier Duval
- Termostato Netatmo
- Termostato Seitron
- Termostato Hager
- Termostato Sygonix
- Termostato TFA
- Termostato Tado
- Termostato Hunter
- Termostato Plieger
- Termostato Tesla
- Termostato Busch-Jaeger
- Termostato Zehnder
- Termostato Bulex
- Termostato UPM
- Termostato Optima
- Termostato AWB
- Termostato Finder
- Termostato Xavax
- Termostato Fantini Cosmi
- Termostato Delta Dore
- Termostato Orbis
- Termostato Niko
- Termostato Boneco
- Termostato EBERLE
- Termostato Grasslin
- Termostato Gira
- Termostato Jung
- Termostato Basetech
- Termostato Wolf
- Termostato HQ
- Termostato Max
- Termostato Eneco
- Termostato Frico
- Termostato Vasco
- Termostato Radson
- Termostato Nobo
- Termostato Baxi
- Termostato Fibaro
- Termostato Nexa
- Termostato EQ3
- Termostato Homematic IP
- Termostato Go Green
- Termostato Weishaupt
- Termostato REMKO
- Termostato ICY
- Termostato HomeMatic
- Termostato Computherm
- Termostato Avidsen
- Termostato SPC
- Termostato Crestron
- Termostato ORNO
- Termostato Berker
- Termostato Drayton
- Termostato Westfalia
- Termostato Heatit
- Termostato 2Heat
- Termostato Bryant
- Termostato Watts
- Termostato Eqiva
- Termostato Etherma
- Termostato Veria
- Termostato Emmeti
- Termostato Thermy
- Termostato Eurotronic
- Termostato Oregon Scientific
- Termostato Muller
- Termostato Worcester-Bosch
- Termostato Econo-Heat
- Termostato VDH
- Termostato Vimar
- Termostato PECO
- Termostato IR-V
- Termostato H-Tronic
- Termostato EasyTemp
- Termostato Elgato
- Termostato Intertechno
- Termostato Schwaiger
- Termostato Helios (Amfra)
- Termostato EQ-3
- Termostato Tru Components
- Termostato Emko
- Termostato Easy Timer
- Termostato Z-Wave
- Termostato Hugo Muller
- Termostato IMIT
- Termostato Innogy
- Termostato Wallair
- Termostato Maico
- Termostato Levica
- Termostato HomePilot
- Termostato Ouellet
- Termostato Techno Line
- Termostato THERMAFLEX
- Termostato Wachendorff
- Termostato Yokis
- Termostato ChiliTec
- Termostato Eliwell
- Termostato Plugwise
- Termostato Johnson Control
- Termostato Webasto
- Termostato Drayton Erie
- Termostato OJ ELECTRONICS
- Termostato Tellur
- Termostato RWE
- Termostato Lowes
- Termostato Jumo
- Termostato Warmup
- Termostato Qubino
- Termostato STI
- Termostato ELKO
- Termostato TrickleStar
- Termostato Gewiss
- Termostato Sinustec
- Termostato Rose LM
- Termostato Otio
- Termostato MundoControl
- Termostato Enda
- Termostato Bearware
- Termostato GENERAL Life
- Termostato Oreg
Últimos Termostato Manuales

27 Octubre 2024

27 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024

26 Octubre 2024