Elektrobock PT22 Manual de Usario

Elektrobock Termostato PT22

Lee a continuación 📖 el manual en español para Elektrobock PT22 (6 páginas) en la categoría Termostato. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

MADE IN CZECH REPUBLIC

• for all types

boilers

• weekly program

(preset)

• 6 temp. changes

per every day

• anti-freeze

mode

• easy installation

• modern design

•BIG WELL-ARRANGED DISPLAY

with navigation in selected language

DESCRIPTION

PT22 is digital room thermostat with backlit display for automatic regulation of heating.

Its advantages involve a quick change in the desired temperature by simply turning the wheel, and

possibility of setting up to weekly program with 6 temperature changes per day.

INSTALLATION AND LOCATION

Install the thermostat at a suitable place where its operation cannot be affected by direct ﬂ ow of hot air

from the heater, sunshine or other disturbing effects. Do not install it on an external wall either. The instal-

lation height should be approx. 1.5 m above the ﬂ oor. Place the thermostat in the “reference room”, such

as the living room (the heating source will switch according to the temperature in this room).

The installation must only be done by a properly qualiﬁ ed person!

Before installation, disconnect the power supply!

1) Switch off the main circuit breaker.

2) Remove the control part from the lower cover of the device (Fig.1).

3) Chip away the central plastic piece from the lower cover to lead in conductors.

4) Run the conductor through the hole and connect it to the terminal acc. to the diagram.

5) Fasten the lower cover to the wiring box with screws (Fig. 2).

6) Batteries are located at the back of the control part. Remove their protective paper

(on ﬁ rst use), or insert new batteries (follow the instructions on page 3).

7) Mount the control part on the lower cover.

8) Switch on the main circuit breaker and test correct connection of the thermostat, see

page 5 (TEST).

9) Upon ﬁ rst start (or reset), the thermostat displays “SET CLOCK”, set the current time

and date according to page 4.

Wiring diagram:

Backlit display

if any button is pushed,

the backlit switches on

automatically for 5 s at

least

Control elements

turning

=change of the

temperature set

push

=choice conﬁ rmation

(entry)

push

opening the main

menu or return a step

back

PT22 BOILER

potential-free

(voltage-free) contact

The thermostat terminals

are marked differently with

every type of boiler. The-

refore, follow the wiring

prescribed by the boiler

manufacturer!

TEMP. IN AUTO

TEMP. IN MANU

Fig.1

HINTS FOR THE USER

Fig.2

Fig.3

alkal.battery

1.5V/AA

alkal.battery

1.5V/AA

QUICK CHANGE OF THE DESIRED TEMPERATURE

Press the “ “ button twice, the desired temperature starts blin-

king on the display. Change the temperature by turning the

“ “ “ “ button button, and press the .

In the AUTO mode, the change lasts until the next program

change.

In the MANU mode, the change is permanent.

BATTERY REPLACEMENT

As soon as “ “ appears on the display, you must replace

the batteries.

1) Remove the control part from the lower cover of the device

(Fig. 1).

2) Replace the batteries. Heed the correct polarity marked in the

battery compartment (Fig. 3). After removing the batteries, all

setting of the thermostat are saved in the E-EPROM memory

20 sec, only!

Always use the type AA, 2 x 1.5 V, alkaline batteries!

Recommendation: Check the batteries before every heating season!

Dispose of old batteries in conformity with regulations on

hazardous waste treatment!

Especificaciones del producto

Marca:	Elektrobock
Categoría:	Termostato
Modelo:	PT22
Color del producto:	Chroom
Altura:	500 mm
Material de la carcasa:	Metaal
Número de lámparas:	1 gloeilamp(en)
Tipo de lámpara:	Halogeen
Lámpara de encendido:	50 W
Longitud:	500 mm
Tipo de ajuste/pie:	GU5.3
Vida útil de la lámpara:	- uur
luz de color:	Wit
clase de protección:	III
Adecuado para uso en interiores:	Ja
Lámpara de voltaje:	12 V
Temperatura de color (máx.):	- K
Tipo-producto:	Oppervlak-spotverlichting