Elektrobock PT23 Manual de Usario

Elektrobock Termostato PT23

Lee a continuación 📖 el manual en español para Elektrobock PT23 (8 páginas) en la categoría Termostato. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

PT23

for all types boilers with

ON / OFF

weekly program (preset)

• 6 temp. changes per every

day

• anti-freeze mode

• easy installation

• modern design

LARGE WELL-ARRANGED DISPLAY

WITH TOUCHING CONTROL

ROOM THERMOSTAT

WITH BACKLIT DISPLAY

DESCRIPTION

PT23 is digital room thermostat with backlit display for automatic regulation of heating.

Its advantages involve a quick change in the desired temperature by simply press the button, and

possibility of setting up to weekly program with 6 temperature changes per day.

INSTALLATION

LOCATION

Install the thermostat at a suitable place where its operation cannot be affected by direct  ow of

hot air from the heater, sunshine or other disturbing effects. Do not install it on an external wall

either. The installation height should be approx. 1.5 m above the  oor. Place the thermostat in

the “reference room”, such as the living room (the heating source will switch according to the

temperature in this room).

1. Switch off the main circuit breaker.

2. Remove the control part from the lower cover of the device (Fig.1).

3. Chip away the central plastic piece from the lower cover to lead in conductors.

4. Run the conductor through the hole and connect it to the terminal acc. to the diagram.

5. Fasten the lower cover to the wiring box with screws (Fig. 2).

6. Batteries are located at the back of the control part. Remove their protective paper (on  rst use), or insert new

batteries (Fig. 3).

7. Mount the control part on the lower cover.

8. Switch on the main circuit breaker and test correct connection of the thermostat, see page 5 (TEST).

9. Upon  rst start (or reset), the thermostat displays “SET CLOCK”, set the current time and date according to page 4.

Wiring diagram:

Backlit display

if any button is

pushed, the backlit

switches on

automatically for 5 s

at least

Control elements

by pressing

= con rmation of

value chagne

by pressing

= entering of main

menu or one step

back

by pressing

= changing the

set value

*The thermostat terminals

are marked differently with

every type of boiler.

Therefore, follow the

wiring prescribed

by the boiler

manufacturer!

BOILER

TEMP. IN AUTO

TEMP. IN MANU

Fig.1

HINTS FOR THE USER

Fig.2

Fig.3

alkal.battery

1,5 V / AA

alkal.battery

1,5 V / AA

QUICK CHANGE OF THE DESIRED TEMPERATURE

Press the „ “ button twice, the desired temperature starts blinking

on the display. With buttons „ “ change the required temperature

and press the „ “ button.

In the AUTO mode, the change lasts until the next program

change.

In the MANU mode, the change is permanent.

BATTERY REPLACEMENT

As soon as „ “ appears on the display, you must replace the

batteries.

1.Remove the control part from the lower cover of the device (Fig. 1).

2.Replace the batteries. Heed the correct polarity marked in the

battery compartment (Fig. 3). After removing the batteries, all

setting of the thermostat are saved in the memory

20 sec, only!

Always use the type AA, 2 x 1.5 V, alkaline batteries!

Recommendation: Check the batteries before every heating season!

Dispose of old batteries in conformity with regulations on hazardous

waste treatment!

The device can only be installed by a person with adequate qualication!

The installation must be executed in a voltage-free state!

Especificaciones del producto

Marca:	Elektrobock
Categoría:	Termostato
Modelo:	PT23
Color del producto:	Wit
Temporizador:	Ja
Ancho:	80 mm
Profundidad:	14 mm
Altura:	80 mm
Amable:	Wandmontage
Manual de usuario:	Ja
Fuente-de-alimentación:	Batterij/Accu
Código de seguridad internacional (IP):	IP20
Indicadores LED:	Ja
Tipo de embalaje:	Doos
Interruptor encendido / apagado:	Ja
Luz indicadora:	Ja
Número soportado de baterías/baterías:	1
Cantidad por paquete:	1 stuk(s)
Frecuencia:	433.92 MHz
Distancia máxima:	30 m
Número de canales:	- kanalen
Adecuado para uso en interiores:	Ja
Alcance interior máximo:	30 m
Temperatura de funcionamiento (TT):	0 - 45 °C
Tipo de Batería:	CR2032