Elkay LKMY1042CR Manual de Usario

Elkay No categorizado LKMY1042CR

Lee a continuación 📖 el manual en español para Elkay LKMY1042CR (7 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
SAVE FOR CONSUMER
INSTALLATION / OWNER’S MANUAL
Mystic - Pull-Out Bar Faucet
LKMY1042CR
LKMY1042NK
LKLFMY1042CR
LKLFMY1042NK
Includes:
Tools:
A
B
D
1/2”
[13 mm]
13/16”
[20 mm]
5/8”
[16 mm]
D1
D3
D2
B1
B2
B3
C1
C2
E
13/16”
[21 mm]
C
NOTE: these washers are not
used on this faucet model
321
Before inserting the single lever group in the hole of
the sink, make sure that the base gasket is properly
positioned in its seat and that the exible hoses are
well tightened to the body of the tap.
Place the single lever group in the hole of the sink,
orienting the spout toward the sink tank.
For countertop thicknesses less than 1/16” thick
use the ange (B1), for all other installations use
the metal washer (B2).
Secure mounting hardware in place by tightening
mounting nut (B3).
Install the check valve (C1) to the outlet hose with a
rubber washer (C2).
Secure with wrench.
Attach the pull-down hose to the bottom of the
check valve with a rubber washer (D1).
Secure with wrench.
13/16”
[20 mm]
WARNING: please carefully read and properly follow the instructions for installation found in this manual.
STEPS:
1/2”
[13 mm]
54
Attach the counterweight (D2) to the exible hose
approximately 15-3/4” [400mm] from the connection
to the outlet pipe.
Tighten the shower (E) to the hose interposing
the gasket (D3) and conrm the hose can slide
smoothly through the passage hole.
321
Before dissassembling the faucet be sure that the water supply is turned off.
Remove the nish cap (A), paying attention not to damage it. Remove the setscrew (B) with a 1/8[2,5mm] hex wrench. Remove the handle (C). Lift the nishing ring nut
(D) using the reference notch. Remove the indicator ring (E). Unscrew the cartridge nut (F) then pull out the cartridge (G). Put the new cartridge into the body of the faucet,
checking that the two centering pins enter into the respective seats (X) and that the gaskets on the cartridge are well positioned.
Reassmble the handle following the instructions in reverse order.
CARTRIDGE REPLACEMENT
B
A
C
X
1/8”
[2,5 mm]
GF
13/16”
[21 mm]
E
D
B3
B2
B1
A
C2
D1
C1
D2
6
Connect the exible hoses to the supply connections
with rubber gaskets.
Secure with wrench.
Turn on the water and check for leaks.
5/8”
[16 mm]
Hot
Cold
Red
Blue
D3
E
13/16”
[21 mm]
1 2
Before removing the aerator make sure that the faucet is turned off.
If the supply is not uid unscrew manually the aerator-holder, remove the lter without damaging and/or loosing the gasket.
If the aerator is clogged just rinse it with running water. Do not use detergents.
Reassemble the aerator by following the instructions in reverse order.
AERATOR CLEANING / REPLACING

Especificaciones del producto

Marca: Elkay
Categoría: No categorizado
Modelo: LKMY1042CR

¿Necesitas ayuda?

Si necesitas ayuda con Elkay LKMY1042CR haz una pregunta a continuación y otros usuarios te responderán




No categorizado Elkay Manuales

Elkay

Elkay LKJ35 Manual de Usario

19 Septiembre 2024
Elkay

Elkay LK35B Manual de Usario

19 Septiembre 2024
Elkay

Elkay LK35L Manual de Usario

19 Septiembre 2024
Elkay

Elkay LK58 Manual de Usario

18 Septiembre 2024
Elkay

Elkay LK8 Manual de Usario

18 Septiembre 2024
Elkay

Elkay LK9 Manual de Usario

18 Septiembre 2024
Elkay

Elkay LK99 Manual de Usario

18 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales