Epcom VTG48A Manual de Usario

Lee a continuación 📖 el manual en español para Epcom VTG48A (16 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Page 1 of 16
IMPORTANT! Read all instructions before installing and using. Installer: This manual must be
delivered to the end user. This manual assumes installation by a suitably qualied Automotive Technician.
Installation and Operation Instructions
12+ Series Vantage™ Lightbars
Lightbar Control Options
Introduction:
12+ Series Lightbars are versatile and powerful warning devices suitable for a range of vehicle types and duties. There are numerous op-
tions and lengths available. The lightbars can either be mounted permanently to the vehicle or mounted using an optional roof mounting kit.
The 12+ Series Lightbar features a durable aluminu dules: Warning modules, Stop-Tail-Turn modules, and white Alley/Takedown/Worklight
modules.
Unpacking and Pre-Installation:
Carefully remove the lightbar and place it on a at surface. Examine the unit for transit damage and locate all parts. If damage is found or
parts are missing, contact the transit company. Do not use damaged or broken parts.
Ensure the lightbar voltage is compatible with the planned installation.
Do not install and/or operate this safety product unless you have read and understand the safety
information contained in this manual.
1. Proper installation combined with operator training in the use, care and maintenance of emergency warning devices are essential to
ensure the safety of emergency personnel and the public.
2. Emergency warning devices often require high electrical voltages and/or currents. Exercise caution when working with live electrical
connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current
arcing, which can cause personal injury and/or severe vehicle damage, including re.
4. Proper placement and installation is vital to the performance of this warning device. Install this product so that output performance of
the system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system
without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure daily that all features of this product work correctly. In use, the vehicle operator
should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors),
people, vehicles or other obstructions.
6. The use of this or any other warning device does not ensure all drivers can or will observe or react to an emergency warning signal.
Never take the right-of-way for granted. It is your responsibility to be sure you can proceed safely before entering an intersection, drive
against trafc, respond at a high rate of speed, or walk on or around trafc lanes.
7. This equipment is intended for use by authorized personnel only. The user is responsible for understanding and obeying all laws
regarding emergency warning devices. Therefore, the user should check all applicable city, state, and federal laws and regulations.
The manufacturer assumes no liability for any loss resulting from the use of this warning device.
8. This product may contain high intensity LEDs staring directly into these lights could result in temporary and/or permanent vision
impairment.
Page 2 of 16
Installation & Mounting:
Mounting
Before proceeding with installation, plan all wiring and cable
routing. Select the mounting location for the lightbar on a
at, smooth surface and center the unit across the width of
the vehicle. The mounting location for the lightbar should
be chosen such that the lightbar is level and visibility to
approaching trafc is optimized. Mounting should be such that
there is no less than ½” clearance between the roof and the
lightbar at any point.
Caution:
When drilling into any vehicle surface, make sure that the area
is free from any electrical wires, fuel lines, vehicle upholstery,
vehicle support members, etc. that could be damaged.
!
Specications:
Length.................48”,54”,60”,72”
Height..................2.5” Width: 11”
Voltage................12-24VDC
Current Draw.......Single Color LED Module = 0.45A Avg. @ 12.8VDC
Dual Color LED Module = 0.90A Avg. @ 12.8VDC
LED STT(pair) = 0.25A Avg.@ 12.8VDC
LED AL,TD,WL (pair) = 1.80A Avg. @ 12.8VDC
Flash Patterns.....48 (See chart)
WARNING!
Failure to install or use this product according to manufacturers recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
NOTE: Unless otherwise congured, lightbars containing dual color modules will operate such that patterns referencing
“Front” will operate color 1 and patterns referencing “Rear” will operate color 2; e.g. on an EZ1206AR dual color
module, amber is color 1 and red is color 2.
Safety Director Flash Pattern Chart
Sequence Description SAE J595
1 Left N/A
2 Left Build N/A
3 Right N/A
4 Right Build N/A
5 Center Out N/A
6 Center Out Build N/A
7 Wig Wag Class 1
8 Class 1Quad Alternate
9Quad Alternate Center Pulse N/A
10 Class 1Single Alternate
11 Single Alternate Center Pulse N/A
Page 3 of 16

Especificaciones del producto

Marca: Epcom
Categoría: No categorizado
Modelo: VTG48A

¿Necesitas ayuda?

Si necesitas ayuda con Epcom VTG48A haz una pregunta a continuación y otros usuarios te responderán




No categorizado Epcom Manuales

Epcom

Epcom X67-R Manual de Usario

10 Septiembre 2024
Epcom

Epcom X303N Manual de Usario

10 Septiembre 2024
Epcom

Epcom GT-003 Manual de Usario

10 Septiembre 2024
Epcom

Epcom X12BW Manual de Usario

10 Septiembre 2024
Epcom

Epcom X7945A Manual de Usario

10 Septiembre 2024
Epcom

Epcom XLS-100 Manual de Usario

10 Septiembre 2024
Epcom

Epcom X3225 Manual de Usario

10 Septiembre 2024
Epcom

Epcom X606-A Manual de Usario

10 Septiembre 2024
Epcom

Epcom X6262A Manual de Usario

10 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales