Epson perfection 1260 photo Manual de Usario

Epson Escáner perfection 1260 photo

Lee a continuación 📖 el manual en español para Epson perfection 1260 photo (1 páginas) en la categoría Escáner. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Unpacking

1. Make sure the following items are included and not damaged. If any

items are missing or damaged, contact your EPSON dealer

immediately.

For the Perfection 1260 Photo

The Perfection 1260 Photo comes with the film adapter which is also

available as an option for the Perfection 1260.

2. Remove the packing tape from your scanner, but leave the yellow

sticker in place until instructed to remove it.

Installing the Software

The scanner software CD-ROM contains the EPSON TWAIN driver, software, and electronic manuals.

You must install the software BEFORE connecting the scanner to your computer.

1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive.

Macintosh users:

After inserting the CD-ROM, the EPSON

folder appears on the desktop. (If the

EPSON folder does not appear,

double-click the EPSON icon on the

desktop.) Double-click the EPSON icon

inside the folder.

2. The EPSON Installation Program dialog

box appears. Select Install Software

and click .

Note for Windows users:

If the EPSON Installation Program

dialog box does not appear,

double-click the My Computer icon.

Click the CD-ROM icon, then select

Open from the File menu. Double-click

Setup. exe.

3. Follow the on-screen instructions until all of the software is installed.

When a message appears informing you that installation is complete,

click OK.

4. Restart your computer if a message appears instructing you to do so.

Note for MacOS X users:

The software will be installed for use in the Classic mode.

After you finish installing the scanner software, read the next section to set

up your scanner.

Setting Up the Scanner

1. Remove the yellow sticker from the

back of the scanner.

2. Slide the transportation lock

all the way to the right.

3. Connect the power cord

and AC adapter, as shown.

4. Connect the AC adapter to

the DC inlet on the back of

the scanner.

5. Plug the other end of the

power cord into an

electrical outlet.

The scanner turns on and

the ] Start button comes on

green.

cCaution:

❏It is not possible to change the AC adapter's input or output

voltage. If the label on the AC adapter does not show the

correct voltage, contact your dealer. Do not plug in the

power cord.

❏Whenever you unplug the scanner, wait at least 10 seconds

before plugging it back in. Rapidly plugging and unplugging

the scanner can damage it.

Note:

This scanner does not have a power button. It turns on when you

connect the AC adapter and then plug in the power cord.

6. Connect the square connector on the USB cable to the USB port on the

back of the scanner. Connect the other end of the USB cable to any

available USB port on your computer or USB hub.

7. Open the document cover and make

sure the fluorescent lamp on the

carriage comes on. This signifies that

the scanner is ready for use.

Note:

❏To turn off the scanner, unplug the

power cord from the electrical

outlet.

❏The scanner may not work properly

if you use a USB cable other than

the one supplied by EPSON, or if you connect to the computer

through more than one hub.

❏The fluorescent lamp turns off if you do not use the scanner for about

15 minutes.

AC adapter

power cord

scanner

software CD

USB cable

The contents may vary in certain locations.

scanner film adapter film holders

Important!

Leave the yellow sticker

in place until you are

instructed to remove it.

The appearance of dialog boxes on

this sheet may differ slightly from those

on your screen.

transportation lock

DC inlet

power cord

AC adapter

USB port

Connect this end of the USB cable

to your computer.

carriage

(in the home position).

Your First Scan

To scan using the ] Start button and EPSON Smart Panel, follow these steps.

1. Open the document cover and place your

document face down on the document table.

Align the center of the document with the

alignment mark. Then close the document

cover.

2. Press the ] Start button on the scanner. After EPSON Smart Panel

automatically opens, click the Scan for Creativity icon.

A progress meter appears on the screen and

your photo is automatically scanned.

3. After your photo is scanned, the Scan for

Creativity dialog box opens. If you want to

scan another photo, place it on the

document table, close the document cover,

then click Scan More. Otherwise, click Finish.

4. ArcSoft™ PhotoImpression™ automatically opens and your scanned

images appear on the screen. Select the image you want to use. You

can edit your image, use it in a PhotoImpression template for calendars

or greeting cards, save it, or print it.

Note:

For help with PhotoImpression, click the question mark in the upper right

corner of the screen.

Using the Scanner Buttons

The scanner buttons work with EPSON Smart Panel to provide shortcuts to

common scanning functions. You can use them to automatically scan and

print a photo, to attach a photo to e-mail, or to scan and upload photos

to an EPSON photo sharing site on the Web. For more information, see the

Reference Guide included on the scanner software CD-ROM, and the

electronic EPSON Smart Panel Help.

Note for Mac OS X users:

You can use the scanner buttons only when in the Classic mode.

Viewing the Reference Guide

To learn more about your scanner, see the EPSON Perfection

1260/1660/2400 Reference Guide.

1. Insert the scanner software CD-ROM into the CD-ROM or DVD drive. If

the CD has not been removed since installing the software, remove it

and then insert it again.

Macintosh users:

After inserting the CD-ROM, the EPSON

folder appears on the desktop. (If the

EPSON folder does not appear,

double-click the EPSON icon on the

desktop.) Double-click the EPSON

icon inside the folder.

2. The EPSON Installation Program dialog box

appears. Select User Guides and click .

Note for Windows users:

If the EPSON Installation Program dialog box

does not appear, double-click the My

Computer icon. Click the CD-ROM icon,

then select Open from the File menu. Then,

double-click Setup. exe.

3. To view the Reference Guide, click View

Reference Guide. To copy the Reference

Guide to your computer, click Install

Reference Guide.

Safety Instructions

Read all these instructions and save them for later reference. Follow all warnings and instructions

marked on the scanner.

cCaution:

Be sure AC power cord meets the relevant local safety standards.

❏Place the scanner close enough to the computer for the interface cable to reach it easily. Do not

place or store the scanner or the AC adapter outdoors, near excessive dirt or dust, water, heat

sources, or in locations subject to shocks, vibrations, high temperature or humidity, direct sunlight,

strong light sources, or rapid changes in temperature or humidity. Do not use with wet hands.

❏Place the scanner and the AC adapter near an electrical outlet where the power cord can be

easily unplugged.

❏Power-supply cords should be placed to avoid abrasions, cuts, fraying, crimping, and kinking. Do

not place objects on top of power-supply cords and do not allow the AC adapter, or allow

power-supply cords to be stepped on or run over. Be particularly careful to keep all power-supply

cords straight at the ends and the points where they enter and leave the transformer.

❏Use only the AC adapter model A171B/E that comes with your scanner. Using any other adapter

could cause fire, electrical shock, or injury.

❏The AC adapter is designed for use with the scanner with which it was included. Do not attempt

to use it with other electronic devices unless specified.

❏Use only the type of power source indicated on the AC adapter's label, and always supply power

directly from a standard domestic electrical outlet with the AC power cord that meets the relevant

local safety standards.

❏Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch

on and off.

❏If you use an extension cord with the scanner, make sure the total ampere rating of the devices

plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the

total ampere rating of all devices plugged into the electrical outlet does not exceed the electrical

outlet's ampere rating. Do not place multiple loads on the electrical outlet.

❏Never disassemble, modify, or attempt to repair the AC adapter, power cord, scanner, and option

by yourself except as specifically explained in the scanner's guides.

❏Do not insert objects into any openings as they may touch dangerous voltage points or short out

parts. Beware of electrical shock hazards.

❏Unplug the scanner and the AC adapter, and refer servicing to qualified service personnel under

the following conditions:

The power cord or plug is damaged; liquid has entered the scanner or the AC adapter; the scanner

or the AC adapter has been dropped or the case damaged; the scanner or the AC adapter does

not operate normally or exhibits a distinct change in performance. (Do not adjust controls that

are not covered by the operating instructions.)

❏Unplug the scanner and the AC adapter before cleaning. Clean with a damp cloth only. Do not

use liquid or aerosol cleaners.

If you are not going to use the scanner for a long period, be sure to unplug the AC adapter from the

electrical outlet.

For United Kingdom, Singapore, and Hong Kong users:

Replace fuses only with fuses of the correct size and rating.

For United Kingdom users:

The following safety information applies to the AC adapter.

wWarning:

Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the supply

voltage.

Important: The wires in the mains lead fitted to this appliance are coloured in accordance with the

following code:

Blue - Neutral

Brown - Live

If you have to fit a plug:

As the colours of the mains lead of this appliance may not match the coloured markings used to

identify the terminals in a plug, please observe the following:

❏The blue wire must be connected to the terminal in the plug marked with the letter N.

❏The brown wire must be connected to the terminal in the plug marked with the letter L.

❏If damage occurs to the plug, replace the cord set or consult a qualified electrician.

Start button

Instructions for using

the Smart Panel

application appear

here.

To scan another

photo, place it on the

scanner and then

click Scan More.

Click Finish when

you are finished

scanning.

Scanned images

appear here.

Click a file name

if you want to

change it.

selected

image

editing

tools

This section

changes based on

what is selected

above.

Start

Copy

Scan to E-mail

Scan to Web

Setup

Color Image Scanner

English

cCautions must be observed to avoid damage to your

equipment. Notes contain important information and useful tips on the operation

of your scanner.

Warnings, Cautions, and Notes

wWarnings must be followed carefully to avoid bodily

injury.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON

CORPORATION. The information contained herein is designed only for use with this EPSON scanner. EPSON is not responsible for any use of this information as applied to other scanners. Neither SEIKO EPSON CORPORATION nor its affiliates shall be

liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product,

or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON

CORPORATION. SEIKO EPSON CORPORATION shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as EPSON Approved Products by SEIKO

EPSON CORPORATION. EPSON is a registered trademark of SEIKO EPSON CORPORATION. Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

4025679-00

XXX

Especificaciones del producto

Marca:	Epson
Categoría:	Escáner
Modelo:	perfection 1260 photo
Colocación del dispositivo:	Ingebouwd
Color del producto:	Wit
Bisagras de puerta:	Rechts
Pantalla incorporada:	Nee
Ancho:	541 mm
Profundidad:	542 mm
Altura:	874 mm
Impuesto neto:	90 W
Nivel de ruido:	37 dB
Consumo-anual-de-energía:	152 kWu
Clase de eficiencia energética (antigua):	A++
Dirección de apertura de puerta intercambiable.:	Ja
Adecuado para ajuste de panel:	Ja
Capacidad neta del frigorífico:	134 l
Frigorífico de capacidad bruta:	138 l
Iluminación interior del frigorífico:	Ja
Número de estantes en el refrigerador.:	3
Número-de-cajones-para-verduras:	1
rejilla para huevos:	Ja
Sin sistema Frost:	Nee
Descongelación automática (frigorífico):	Ja
Ancho del compartimento de instalación:	560 mm
Profundidad del compartimento de instalación:	560 mm
Altura del compartimento de instalación:	880 mm
Uso de energía por día:	0.415 kWh/24u
Actual:	10 A
Panel de puerta incluido:	Nee
Clase-climática:	SN-ST