Etekcity XJ-10819 Manual de Usario

Lee a continuación 📖 el manual en español para Etekcity XJ-10819 (2 páginas) en la categoría Báscula de cocina. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
User Manual
Ultra-Thin Digital Kitchen Scale
Model No.: XJ-10819
Question or Concerns? support@etekcity.com
visit etekcity.com for more products
Thank you for purchasing the Ultra-Thin Digital Kitchen Scale by Etekcity. With
a capacity of 13 lb. (6 kg), it is great for measuring all sorts of ingredients in
the kitchen. Cooking and baking are made simple with this very thin, cordl s es
scale. An auto-shut off function improves the lifetime of the batteries for many
consistent, accurate u s.se
IMPORTANT: Please read and comply with all the instructions and warnings
provided in this manual before using the product. Failure to comply with the
instructions and warnings provided herein may result in inaccurate results and/or
damage to the product itself.
The included AAA batteries are preinstalled in the scale. Open the battery
compartment cover located on the backside of the scale and remove the plastic
strip from the battery compartment to allow the batteries to power the device.
Reapply the battery compartment er.cov
the battery compartment.
4. Reseal the battery compartment.
Safety e & CareUs
Always place the scale on a hard, dry and flat surface before measurement in
order to ensure accurate measurements.
For b t results, place the object being measured in the center of the scale.es
Dirt, dust, vibration, wind, air currents, and electromagnetic interference may
contribute to inaccurate results.
exceed the 13 lb (6 kg) weight capacity; Doing so may damage the DO NOT
scale. An overload indicator will appear on the LCD display if the limit is
exceeded.
immerse the scale in water or corrosive liquids. If liquid is spilled on DO NOT
the scale platform, immediately wipe the scale clean with a soft cloth in order
to avoid potential damage to the scale.
mix new and used batteries to power the device.DO NOT
Avoid exposing the device to damp environments or extreme temperatures.
When replacing batteries, make sure to insert them under the correct polarity
as indicated within the battery compartment.
If the low battery indicator is displayed, please replace the batteries.
This scale is not intended for commercial or heavy-duty use.
Handle the scale with ca . Keep the scale in a cool, dry environment. re
To clean, wipe the surface with a soft, damp cloth.
If the scale is not in use for an extended period of time, take out the batteries
to extend the scale service lifetime.
If the scale fails to turn on, check if the batteries are installed correctly.
Replace the batteries if nec sary.es
Features & Specifications
Capacity: 13 lb. (6 kg)
Graduation: 0.1 oz (1 g)
Measurement Units: lb (oz), kg (g), ml, fl oz
Batteries: 2x1.5V AAA
Auto-shut off function
Backlit LCD
Tare function
Error Messages
An “Err” message on the LCD means there is too much weight on the scale.
Remove the load from the scale to prevent damage.
If a flashing battery icon appears, replace the batteries. When the batteries run
out of p er, the scale will display “Lo” and shut off. ow
O rat npe io
1. The battery is included in the scale within the battery compartment. Remove
the insulating strip before use.
2. Pr s the ON/OFF button to turn on the scale.es
3. The default unit for the scale is lb oz. To change the unit of measurement,
pr s the UNIT button until desired unit is displayed.es
4. The scale will display zero when it is ready to use. If it does not show zero,
pr s and release the ON/OFF button to r et the scale.es es
5. Place the object to be weighed on the scale platform. The LCD screen with
display its weight.
6. To turn off the scale, press the hold the ON/OFF button for at least 3 seconds.
The scale will also turn off after 2 minutes of inactivity.
Tare Function
The tare function allows the user to weigh the contents of a container by simply
calculating out the container’s weight.
1. Place an empty container on the scale and pr s the “ON/OFF” button. es
2. The scale will reduce down to zero with the container still on the scale.
3. Place the contents to be weighed in the container, the weight of the contents
will be displayed on the LCD screen.
Calibrating the Scale
NOTE: It is only necessary to calibrate the scale when it is displaying obviously
incorrect readings. The scale is calibrated out of the box and does not require
calibration for every use.
1. To calibrate the scale, press and hold the UNIT and ON/OFF buttons at the
same time.
2. Random digits will appear on the LCD screen. When these numbers are
displayed, release both buttons simultaneously.
3. he scale will display “2 kg” on the Please press ON/OFF button again quickly. T
screen. Once this is displayed, place a 2 kg weight on the scale.
4. The scale will then display “5 kg". When this appears on the screen, place a 5 kg
weight on the scale.
5. If the calibration is succe ful, “PASS” will appear on the display. If not, you ss
may need to repeat the calibration process.
Battery Replacement
1. Open the battery compartment cover on the backside of the scale.
2. Take out the used batteries and dispose them properly.
3. Install new AAA 1.5 V batteries, taking note of the correct polarity displayed in
Fun ioct n D ram iag
1. Scale platform
2. LCD
3. ON/OFF button
4. Measurement UNIT button
Package Contents
1 x Ultra-Thin Digital Kitchen Scale
2 x AAA batteries
1 x User Manual

Especificaciones del producto

Marca: Etekcity
Categoría: Báscula de cocina
Modelo: XJ-10819

¿Necesitas ayuda?

Si necesitas ayuda con Etekcity XJ-10819 haz una pregunta a continuación y otros usuarios te responderán




Báscula de cocina Etekcity Manuales

Báscula de cocina Manuales

Últimos Báscula de cocina Manuales