Eurolite LED Strip 4in1 Zone RF Controller Manual de Usario

Eurolite No categorizado LED Strip 4in1 Zone RF Controller

Lee a continuación 📖 el manual en español para Eurolite LED Strip 4in1 Zone RF Controller (12 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

USER MANUAL

No. 50531145 Receiver

Wireless remote control for single- and multi-colored LEDs 12-24 V

LED Strip 4in1 Zone RF Controller

No. 50531140 Set (receiver and remote control)

www.eurolite.de

•

Thank you for purchasing this LED control system. The wireless

receiver is especially designed for control of single- and

multi-colored (CW+WW, RGB, RGBW) LED strips requiring an

operating voltage of 12 V and 24 V direct current. The receiver is

operated by wireless control (2.4 GHz) via the remote control. 4

control zones are available. Multiple receivers can be assigned to

the zones as desired and controlled via the same remote control,

either separately or in groups. As the receivers forward the radio

signal, a large range can be covered and all color settings run in

sync. The maximum power consumption of a channel must not

exceed 6 A and of all LEDs connected 24 A. The connection must

be made by skilled personnel only. Please read these operating

instructions carefully before using the product. They contain

important information for the correct use of your product. Please

keep them for future reference.

•

Only use the product according to the instructions given herein. Damages due to

failure to follow these operating instructions will void the warranty! We do not assume

any liability for any resulting damage.

•

We do not assume any liability for material and personal damage caused by improper

use or non-compliance with the safety instructions. In such cases, the

warranty/guarantee will be null and void.

•

Unauthorized rebuilds or modifications of the product are not permitted for reasons of

safety and render the warranty invalid.

•

This product is not a toy. Keep it out of the reach of children. Do not leave packaging

material lying around carelessly.

•

Keep this device away from rain and moisture. Indoor use only.

•

Protect the product against excessive humidity and heat. The recommended

temperature is -5 to +45°C.

•

Before taking into operation, check upon possible damages. If defective, the product

must not be taken into operation.

•

This product is maintenance-free, except for occasional cleaning. You can use a

slightly dampened cloth for cleaning. Never use alcohol or solvents.

•

Maintenance and service operations are only to be carried out by authorized dealers.

INSTALLATION

•

Overview

Setup

•

Install the receiver in a suitable spot and remove the covers from the terminals.

•

Connect the LEDs to the negative and positive OUTPUT terminals (V+ = common positive pole,

V- = see figure on next page). The load by the LEDs must not exceed 6 A per channel. The

overall load must not exceed 24 A to avoid damage to the receiver.

•

For power supply, connect a regulated power supply unit (min. 12 V, max. 24 V) to the negative

and positive INPUT terminals.

•

Use the DIP switches to select the operating mode according to the connected LEDs:

RGB RGBW DIM CCT

•

Screw on the covers with the screws provided.

•

For power supply of the remote control, insert two 1.5 V AAA batteries into the battery

compartment as indicated.

•

For operation the receiver needs to be assigned to the remote control (see chapter “Wireless

Connection” on page 4).

DIP switch to select LED type

Power connection: 12-24V DC Connectors for LEDs

INSTALLATION

•

Application example 1: Single-color LEDs

V+→V+, CH1→V‒, CH2→V‒, CH3→V‒, CH4→V‒

Application example 2: White LEDs (CW+WW) with variable color temperature

V+→V+, CH1→CW, CH2→WW, CH3→CW, CH4→WW

Application example 3: RGB LEDs

V+→V+, CH1→R, CH2→G, CH3→B, CH4→not connected

Application example 4: RGBW LEDs

V+→V+, CH1→R, CH2→G, CH3→B, CH4→W

Especificaciones del producto

Marca:	Eurolite
Categoría:	No categorizado
Modelo:	LED Strip 4in1 Zone RF Controller
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Buttons, Rotary
Color del producto:	Wit
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Peso.:	64500 g
Ancho:	600 mm
Profundidad:	570 mm
Altura:	850 mm
Impuesto neto:	2000 W
tipo de cargador:	Voorbelading
Color de la puerta:	Wit
Material del tambor:	Roestvrijstaal
Longitud del cable:	1.8 m
Contenido del tambor:	53 l
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	20 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
Función antiarrugas:	Ja
Clase-de-eficiencia-energética:	D
Peso del embalaje:	66000 g
Ancho del embalaje:	640 mm
Empaquetadura en profundidad:	626 mm
Altura del embalaje:	900 mm
Consumo de energía de lavado:	0.688 kWu
Consumo de agua por ciclo:	45 l
Clase de medicamentos centrífugos.:	B
Nivel de ruido (lavado):	- dB
Monitoreo de espuma:	Ja
Sistema de control de desequilibrio:	Ja
Velocidad centrífuga ajustable:	Ja
Velocidad máxima de centrifugado:	1351 RPM
Actual:	10 A
Clase de emisión de ruido:	B
tecnología inversor:	Ja
Agregar función de ropa (pausa):	Ja
Nivel de ruido durante la centrifugación.:	76 dB
Tiempo de ciclo (máx.):	192 min
Número de programas de lavado:	15
Consumo de energía por 100 ciclos.:	69 kWu
Interruptor-encendido-/-apagado:	Ja
Pies ajustables:	Ja
Protección contra inundaciones:	Ja
Longitud de la manguera de drenaje:	1.45 m
Longitud de la manguera de suministro de agua:	1.3 m
Temperatura-ajustable:	Ja
Kijkglas:	Ja
Consumo de energía (mantenerlo encendido):	0.3 W
Función plancha fácil:	Ja
Consumo de energía (apagado):	0.3 kWu
Presión mínima de agua:	50 kPa
Presión máxima de agua:	800 kPa
Capacidad nominal:	7 kg
voltaje-de-entrada-de-CA:	230 V
Frecuencia-de-entrada-de-CA:	50 Hz
Tipo-de-visualización:	LCD
Escala de eficiencia energética:	A tot G
Programas-de-lavado:	Black, Cotton, Delicate/silk, Eco, Hygiene/anti-allergy, Jeans/denim, Quick 14min, Quick 30°C, Sport, Synthetics, Wool
Índice de reparación:	6.5