Euromaid WM55 Manual de Usario

Euromaid lavadora WM55

Lee a continuación 📖 el manual en español para Euromaid WM55 (16 páginas) en la categoría lavadora. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

MODEL

WM55

5.5kg

Front Loader

Washing Machine

Manual

Installation and Operation

2 - EN

1 Warnings

General Safety

• Never place your machine on a carpet

covered ﬂoor. Otherwise, lack of airﬂow

from below of your machine may cause

electrical parts to overheat. This may cause

problems with your washing machine.

• If the power cable or mains plug is

damaged you must call Authorized Service

for repair.

• Fit the drain hose into the discharge

housing securely to prevent any water

leakage and to allow machine to take in

and discharge water as required. It is very

important that the water intake and drain

hoses are not folded, squeezed, or broken

when the appliance is pushed into place

after it is installed or cleaned.

• Your washing machine is designed to

continue operating when the power

restores after a power interruption. The

machine will resume its program when the

power restores. Press the “Start/Pause/

Cancel” button for 3 seconds to cancel the

program (See, Canceling a Program)

• There may be some water in your machine

when you receive it. This is from the quality

control process and is normal. It is not

harmful to your machine.

• Some problems you may encounter may

be caused by the infrastructure. Press

“Start/Pause/Cancel” button for 3 seconds

to cancel the program set in your machine

before calling the authorized service.

First Use

• Carry out your ﬁrst washing process

without loading your machine and with

detergent under “Cottons 90°C” program.

• Ensure that the cold and hot water

connections are made correctly when

installing your machine.

• If the current fuse or circuit breaker is less

than 16 Amperes, please have a qualiﬁed

electrician install a 16 Ampere fuse or

circuit breaker.

• While using with or without a transformer,

do not neglect to have the grounding

installation laid by a qualiﬁed electrician.

Our company shall not be liable for any

damages that may arise when the machine

is used on a line without grounding.

• Keep the packaging materials out of reach

of children or dispose them by classifying

according to waste directives.

Intended use

• This product has been designed for home

use.

• The appliance may only be used for

washing and rinsing of textiles that are

marked accordingly.

Safety instructions

• This appliance must be connected to

an earthed outlet protected by a fuse of

suitable capacity.

• The supply and draining hoses must

always be securely fastened and remain in

an undamaged state.

• Fit the draining hose to a washbasin or

bathtub securely before starting up your

machine. There may be a risk of being

scalded due to high washing temperatures!

• Never open the loading door or remove the

ﬁlter while there is still water in the drum.

• Unplug the machine when it is not in use.

• Never wash down the appliance with a

water hose! There is the risk of electric

shock!

• Never touch the plug with wet hands. Do

not operate the machine if the power cord

or plug is damaged.

• For malfunctions that cannot be solved by

information in the operating manual:

• Turn off the machine, unplug it, turn off

the water tap and contact an authorized

service agent. You may refer to your local

agent or solid waste collection center in

your municipality to learn how to dispose of

your machine.

If there are children in your

house...

• Keep children away from the machine

when it is operating. Do not let them

tamper with the machine.

• Close the loading door when you leave the

area where the machine is located.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,or lack

of experience and knowledge,unless they

have been given supervises or instruction

concerning use of the appliance by a person

responsible for their safety.

3 - EN

2 Installation

Removing packaging

reinforcement

Tilt the machine to remove the packaging

reinforcement. Remove the packaging

reinforcement by pulling the ribbon.

Opening the transportation locks

Transportation safety bolts must be

removed before operating the washing

machine! Otherwise, the machine will be

damaged!

1. Loosen all the bolts with a spanner until

they rotate freely (“C”)

2. Remove transportation safety bolts by

turning them gently.

3. Fit the covers (supplied in the bag with the

Operation Manual) into the holes on the

rear panel. (“P”)

Keep the transportation safety bolts in

a safe place to reuse when the washing

machine needs to be moved again in the

future.

Never move the appliance without the

transportation safety bolts properly ﬁxed in

place!

Adjusting the feet

Do not use any tools to loosen the lock

nuts. Otherwise, they can be damaged.

1. Manually (by hand) loosen the lock nuts on

the feet.

2. Adjust them until the machine stands level

and ﬁrmly.

3. Important: Tighten all lock nuts up again.

Connecting to the water supply.

Important:

• The water supply pressure required to run

the machine must be 1-10 bar (0,1 – 1

MPa).

• Connect the special hoses supplied with

the machine to the water intake valves on

the machine.

• If you are going to use your double water-

inlet machine as a single (cold) water-inlet

unit, you must install the stopper*, supplied

with your machine to the hot water valve.

• If you want to use both water inlets of the

product, you can connect the hot water

hose after removing the stopper and

gasket group from the hot water valve.

* Applies for the products supplied with a blind

stopper group.

• Models with a single water inlet should not

be connected to the hot water tap.

When returning the appliance to its place after

maintenance or cleaning, care should be taken

not to fold, squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be attached to

the edge of a washbasin or bathtub. The drain

hose should be ﬁrmly ﬁtted into the drain as to

not get out of its housing.

Important:

• The end of the drain hose must be directly

connected to the wastewater drain or to

the washbasin.

• The hose should be attached to a height of

at least 60 cm, and 90 cm at most.

• In case the hose is elevated after laying it

on the ﬂoor level or close to the ground

(less than 40 cm above the ground), water

discharge becomes more difﬁcult and the

laundry may come out wet.

• The hose should be pushed into the

drainage for more than 15 cm. If it is too

long you may have it shortened.

• The maximum length of the combined

hoses must not be longer than 3.2 m.

Especificaciones del producto

Marca:	Euromaid
Categoría:	lavadora
Modelo:	WM55
Peso.:	1111 g
Ancho:	278 mm
Profundidad:	107 mm
Altura:	34 mm
Ancho del embalaje:	385 mm
Empaquetadura en profundidad:	324 mm
Altura del embalaje:	233 mm
Frecuencia del procesador:	925 MHz
factor vorm:	ATX
Resolución Máxima:	4096 x 3112 Pixels
Número de puertos HDMI:	1
Full HD:	Ja
HDCP:	Ja
hdmi:	Ja
Versión HDMI:	1.4a
Número de cerraduras:	2
Sintonizador de TV integrado:	Nee
Compatibilidad con Mac:	Nee
Memoria de velocidad de reloj:	5500 MHz
Puertos DVI-I:	1
Memoria gráfica:	3 GB
Tipo de conexión:	PCI Express 3.0
Mini DisplayPort cantidad:	2
Espacio mínimo de almacenamiento en disco:	200 MB
Dimensiones (Ancho x Fondo x Alto):	278 x 107 x 34 mm
Tipo de enfriamiento:	Actief
RAM mínima:	1024 MB
Familia de procesadores gráficos:	AMD
DIFERENTE:	Nee
Ancho de banda de memoria (máx.):	264 GB/s
Autobús de memoria:	384 Bit
Versión OpenGL:	4.2
Versión de DirectX:	11.1
Versión del modelo de sombreador:	5.0
Fuente de alimentación mínima del sistema:	500 W
Consumo de energía (típico):	250 W
Soporte para procesamiento paralelo:	APP, Hybrid CrossFireX, Quad-GPU CrossFireX
DVI de doble enlace:	Ja
Adaptador gráfico RAMDAC:	400 MHz
Procesadores de flujo:	2048
Pantallas máximas por tarjeta de video:	6
PhysX:	Nee
Conectores de alimentación adicionales incluidos.:	1x 6-pin, 1x 8-pin