EverFocus EHD300 Manual de Usario

Lee a continuación 📖 el manual en español para EverFocus EHD300 (12 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
EVERFOCUS
1/3” Color Rugged Dome Camera
Operation Instructions
Model No. EHD300N
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,
audio speakers since the magnetic fields generate from above devices will distort the video
images.
2. Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3. Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4. Keep the power cord away from water and liquid.
Touching the wet power cord may result in electric shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or fire.
1
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from
the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the
camera lens.
7. Do not operate the camera beyond the specified temperature, humidity or
power source ratings.
Use the camera at temperatures within –10~ 50/14 ~ 122℉ and humidity between
20%~ 80%. The input power source is 12VDC/24VAC.
PREFACE
The most technically advanced EHD series are the newest vandal-resistant Color Rugged
Dome Camera from EverFocus Electronics. The Color Rugged Dome Camera can withstand
a blow from a 10-pound sledgehammer and has a built-in heater that allows for operation in
low temperatures. It is perfect for all high-profile crime-prone applications such as building
entrances, retail stores, and shopping malls. EHD series are unquestionably one of the
world's toughest cameras and is your best choice for vandal resistance.
FEATURES
z 1/3” SONY Super HAD color CCD pick up device for more than 520 TV lines of
horizontal resolution
z Low light sensitivity of 0.4 lux/F=1.2 is achieved by using 1/3” SONY Super HAD
interline transfer color CCD
z The electronic shutter and AGC allow the camera to be used in environment with
varying light levels
z 12VDC/24VAC switches automatically power supply
z S/N Ratio reaches 48 dB or more
z Built-in Vari-focal lens
z Flickerless, Mirror, AGC and BLC ON/OFF switchable
z With manual Pan/Tilt mechanism
z Rugged dome designed for vandal proof
z Rugged Dome designed with 3-axis which provides the best installation for ceiling
and wall mount
z IP66 weatherproof
2
INSTALLATION
1. Loosen the 4 fix screws on the housing cover by using the attached wrench (Figure 1).
Please pay attention not to damage the lens.
2. Remove the camera.
To remove the camera, first unplug the wire connection on the back of the camera. Then
loosen the 2 locking screws on the camera base, push the camera base to the right (toward
heater direction, as shown in Figure 2), remove the camera from the mounting base.
Reinstall the camera and the cable while the base mounting is completed.
Figure 1
Figure 2
Locking Screws
Vari-Focal Lens

Especificaciones del producto

Marca: EverFocus
Categoría: Cámara de vigilancia
Modelo: EHD300

¿Necesitas ayuda?

Si necesitas ayuda con EverFocus EHD300 haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia EverFocus Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales