EverFocus EQH5200 Manual de Usario

Lee a continuación 📖 el manual en español para EverFocus EQH5200 (15 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/15
2 Megapixel Full HD-CCTV
Camera
Operation Instructions
Model No. EQH5200
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0 ~ 45 (32~113) and humidity between 20~80%.
The input power source is 12VDC/24VAC.
- 1 -
TABLE OF CONTENTS
1. PRODUCT OVERVIEW...............................................................................................................2
1.1 Main Features ............................................................................................................................................... 2
1.2 Package Contents.......................................................................................................................................... 2
1.3 Specifications ................................................................................................................................................ 3
1.4 Dimensions ................................................................................................................................................... 3
2. NAMES AND FUNCTIONS OF PARTS .........................................................................................4
2.1 Front panel.................................................................................................................................................... 4
2.2 Top/Bottom Mounting ..................................................................................................................................... 4
2.3 Back panel and connections ........................................................................................................................... 5
3. INSTALLATION...........................................................................................................................6
4. OSD Menu & Configuration..........................................................................................................7
4.1 Exposure .................................................................................................................................................... 10
4.1.1 Lens ........................................................................................................................................................ 10
4.1.2 Shutter..................................................................................................................................................... 10
4.1.3 Iris ........................................................................................................................................................... 10
4.1.4 AGC (Auto Gain Control – basic low light signal amplification) ....................................................................... 10
4.1.5 BLC ......................................................................................................................................................... 10
4.1.6 Anti-Flicker ................................................................................................................................................11
4.2 White Balance Control...................................................................................................................................11
4.3 Day/Night.....................................................................................................................................................11
4.4 Special........................................................................................................................................................ 12
4.4.1 Resolution ................................................................................................................................................ 12
4.4.2 Camera Title............................................................................................................................................. 12
4.4.3 D-Effect.................................................................................................................................................... 12
4.4.4 TV standard.............................................................................................................................................. 13
4.4.5 Language................................................................................................................................................. 13
4.4.6 Default ..................................................................................................................................................... 13
4.5 Image Adjust ............................................................................................................................................... 13
4.5.1 Sharpness................................................................................................................................................ 13
4.5.2 Brightness ................................................................................................................................................ 13
4.5.3 Contrast ................................................................................................................................................... 13
- 2 -
1. PRODUCT OVERVIEW
Deliver 2 megapixel full HD 1080i quality digital images over standard coaxial cable with the EQH5200!
Wire new megapixel systems with familiar and easy to install coax and BNC connectors, or reuse the
existing coax cable infrastructure to efficiently upgrade analog systems to megapixel digital
performance without the need to design and deploy an IP network. Enjoy true plug-and-play: each
home run coaxial cable provides a full bandwidth dedicated communications path for the
HD-SDI/HD-CCTV standards compliant signal; no addressing is required to capture full 1080i HD real
time video, without congestion, latency or distortion. Easy to install and test, the EQH5200 has a TV
output at the back of the camera to connect a standard portable test monitor for convenient aim and
focus.
The EQH5200 is based on a 1/2.5” 2 megapixel progressive scan sensor for full HD images, with field
selectable choice of 1080i resolution output, or 720p resolution to conserve DVR hard disk space. With
dual voltage (12VDC/24VAC) operation, true day/night operation, and a flexible choice of megapixel
lenses to achieve the desired field of view, the EQH5200 is the right choice to deploy HD-CCTV video
surveillance.
1.1 Main Features
HD-CCTV 2 Megapixel real time 1080i HD video over coax
2 megapixel progressive scan CMOS sensor
Supports video outputs of 720p and 1080i
Lens Types: supports DC and manual iris lenses, CS mount (C mount adapter ring included)
True day/night mode selectable with automatic ICR module
Easy to use OSD setup menu
Dual Video Output : Megapixel HD-SDI (BNC) plus SD TV Out (RCA) for installation
Dual Power Source 12VDC/24VAC dual voltage
1.2 Package Contents
1. Camera unit
2. User’s manual
3. ND filter
4. Accessory pack containing
i. 5mm spacer C/CS Lens adapter
ii. ¼-20 UNC thread mounting bracket and (2) screws
iii. Allen key to for lens back focus set screw
iv. Lens control voltage connector

Especificaciones del producto

Marca: EverFocus
Categoría: Cámara de vigilancia
Modelo: EQH5200

¿Necesitas ayuda?

Si necesitas ayuda con EverFocus EQH5200 haz una pregunta a continuación y otros usuarios te responderán




Cámara de vigilancia EverFocus Manuales

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales