Extron Retractor SM HDMI Manual de Usario

Extron No categorizado Retractor SM HDMI

Lee a continuación 📖 el manual en español para Extron Retractor SM HDMI (6 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
1
IMPORTANT:
Go to www.extron.com for the
complete user guide
, installation
instructions, and specifications.
Retractor SM • Installation Guide
This guide provides basic instructions for an experienced technician to quickly install the Extron
Retractor SM Show Me® cable retraction modules in an Extron TeamWork® Collaboration System and
in compatible Cable Cubby enclosures.
Additional instructions are available in the TeamWork Collaboration System Installation Guide and the
installation guides for the individual Cable Cubby® enclosures and the . All Retractor SM User Guide
are available at www.extron.com.
NOTE: For information on safety guidelines, regulatory compliances, EMI/EMF compatibility,
accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide
on the Extron website.
Planning
Retractor SM modules can be mounted in a horizontal, vertical, or angular orientation depending upon under‑table clearance and
accessibility.
Horizontal mounting is recommended to provide maximum legroom and to protect the Retractors against accidental damage.
Be certain the Horizontal Mounting Bracket can be fastened under the table or on a table support without bending the pulley
system or forcing it from a perpendicular angle with the enclosure (see the Top View diagram on page3).
Vertical mounting is used where insufcient under‑table space exists for horizontal mounting or where under‑table access is
limited. Ensure the Retractor SM modules hang freely without touching the oor and are not obstructed under the table.
Angular mounting is used where insufcient under‑table space exists for horizontal mounting and tabletop to oor clearance
prevents vertical mounting. An additional mounting hole allows installation at an angle providing extra oor clearance.
• For horizontal mounting, a Retractor SM Horizontal Bracket Kit is required.
• A Retractor SM Filler Module is required to occupy unused Retractor space.
• Depending on the enclosure, various Retractor SM Mounts are available, both Triple and Quad.
NOTE: See the for a list of compatible Retractor SM Mounts and brackets to suit the application and
Extron website
enclosure.
Mounting kits, bracket kits, ller modules, and accessories are available at www.extron.com.
For new installations, to determine the best location for the enclosure, keep in mind the under‑table space required for the
retraction system. Refer to the enclosure installation guide for mounting.
NOTE: Before starting an installation, determine if additional hardware is needed.
Required Tools and Additional Accessories
Horizontal Mounting
Bracket (Optional)
Retractor SM
Mount - Triple
Retractor SM
Mount - Quad (x2)
-or-
Retractor SM
Mount - Triple
(x4) (x4)
(x2)
(x2)
(x3)
Filler Module
(Optional)
(x2)
( 2
)
)
Tape Measure Phillips Screw Driver Zip TiesMarking Pen Tweeker
2
Retractor SM • Installation Guide (Continued)
Getting Started — Determine Under-table Clearances
Follow the installation instructions provided in your Cable Cubby enclosure package to determine a suitable mounting location.
The diagrams that follow show the space required for a Retractor SM module installation in a compatible enclosure.
NOTES:
• To prevent objects from impeding cable retraction, ensure the exposed cable clears nearby obstructions.
• Excess cabling can cause clearance issues. Use zip ties to secure under‑table cabling to prevent accidental contact or
entanglement.
The Retractor SM module is mounted from below the enclosure.
Retractor SM
Horizontal Mounting Vertical Mounting Angular Mounting
15.2 in.
(386 mm)
25.7 in.
(653 mm)
27.4 in.
(696 mm)
30
8.3 in.
(211 mm)
14.4 in.
(366 mm)
13.3 in.
(338 mm)
17.7 in.
(450 mm)
Cable Cubby 1202
Cable Cubby 700
14.8 in.
(376 mm)
13.4 in.
(341 mm)
8.7 in.
(220 mm)
27.4 in.
(695 mm)
25.7 in.
(653 mm)
Pigtails
For connections to devices under the table, the Retractor SM
modules have 6feet (1.8m) of pigtail from the exit of the cable
retainer as shown.
6 ft. (1.8 m) Std.
3
Getting Started — Prepare the Retractors
The Retractor SM modules are delivered ready to mount vertically. No further modications are required. If the Share button is not
seated fully against the cable release assembly, conrm proper tension adjustment using the instructions in the Retractor SM User
Guide.
To mount a Retractor horizontally or at an angle:
Remo two enclosure screws ve
(one on each side) from this position
for horizontal and angular mounting.
Cable Stop Assembly
1
Share Button
Screws (one on each side)
To mount the Retractor at an angled position for increased under-table clearance:
Install the two enclosure screws
removed in step 1 (one on each side)
in the angular mounting location.
3
Mounting Location
For angular mounting, move the
cable stop assembly upward until
the angular mounting hole is visible.
Go to 3.
2
Angular Mounting Hole
Getting Started — Prepare the Enclosure
By now, you should be certain the Retractor SM modules have adequate under‑table clearance for installation and that proper
legroom is provided to avoid accidental contact with the system. You should have the required accessories for mounting the
retraction system and to congure the enclosure (see Required Tools and Additional Accessories on page1).
Horizontal
Brac tke
Top View
USB CHARGER
NOTE: For horizontal mounting instructions see
the and the Retractor SM User Guide Retractor
SM Horizontal Bracket Installation Guide.
DANGER:
• Disconnect the power from the Cable Cubby enclosure before
beginning a Retractor system installation.
• Débranchez l’alimentation du boîtier CableCubby avant de
commencer l’installation d’un système de Rétracteur.

Especificaciones del producto

Marca: Extron
Categoría: No categorizado
Modelo: Retractor SM HDMI

¿Necesitas ayuda?

Si necesitas ayuda con Extron Retractor SM HDMI haz una pregunta a continuación y otros usuarios te responderán


No categorizado Extron Manuales

Extron

Extron PI 115 Manual de Usario

27 Octubre 2024
Extron

Extron XTP DTP 24 Manual de Usario

27 Octubre 2024
Extron

Extron IN1608 XI Manual de Usario

25 Octubre 2024
Extron

Extron FOX II RS 104 Manual de Usario

25 Octubre 2024
Extron

Extron DTP T UWP 4K 232 D Manual de Usario

1 Octubre 2024
Extron

Extron FOX Matrix 7200 Manual de Usario

24 Septiembre 2024
Extron

Extron EWB 210 Series Manual de Usario

24 Septiembre 2024
Extron

Extron EDID 101D Manual de Usario

24 Septiembre 2024
Extron

Extron FMR 206 Manual de Usario

24 Septiembre 2024
Extron

Extron EWB Series Manual de Usario

24 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024